10 CFR §429.29

1. (a)Sampling plan for selection of units for testing.
   1. (1)The requirements of § 429.11 are applicable to showerheads; and
   2. (2)For each basic model of a showerhead, a sample of sufficient size shall be randomly selected and tested to ensure that any represented value of water consumption of a basic model for which consumers favor lower values shall be greater than or equal to the higher of:
      1. (i)The mean of the sample, where:
      2. (ii)The upper 95 percent confidence limit (UCL) of the true mean divided by 1.05, where:
2. (b)Certification reports.
   1. (1)The requirements of § 429.12 are applicable to showerheads; and
   2. (2)Pursuant to § 429.12(b)(13), a certification report shall include the following public product-specific information: The maximum water use in gallons per minute (gpm) rounded to the nearest 0.1 gallon, the maximum flow water pressure in pounds per square inch (psi), and a declaration that the showerhead meets the requirements of § 430.32(p) pertaining to mechanical retention of the flow-restricting insert, if applicable.