15 USC § 206
Standard gauge for sheet and plate iron and steel
through Pub. L. 116-344, except Pub. Ls. 116-260 and 116-283
For the purpose of securing uniformity the following is established as the only standard gauge for sheet and plate iron and steel in the United States of America, namely:
Open Table| Number of gauge | Approximate thickness in fractions of an inch | Approximate thickness in decimal parts of an inch | Approximate thickness in millimeters | Weight per square foot in ounces avoirdupois | Weight per square foot in pounds avoirdupois | Weight per square foot in kilograms | Weight per square meter in kilograms | Weight per square meter in pounds avoirdupois |
|---|---|---|---|---|---|---|---|---|
| 0000000 | 1/2 | .5 | 12.7 | 320 | 20.00 | 9.072 | 97.65 | 215.28 |
| 000000 | 15/32 | .46875 | 11.90625 | 300 | 18.75 | 8.505 | 91.55 | 201.82 |
| 00000 | 7/16 | .4375 | 11.1125 | 280 | 17.50 | 7.983 | 85.44 | 188.37 |
| 0000 | 13/32 | .40625 | 10.31875 | 260 | 16.25 | 7.371 | 79.33 | 174.91 |
| 000 | 3/8 | .375 | 9.525 | 240 | 15 | 6.804 | 73.24 | 161.46 |
| 00 | 11/32 | .34375 | 8.73125 | 220 | 13.75 | 6.237 | 67.13 | 148.00 |
| 0 | 5/16 | .3125 | 7.9375 | 200 | 12.50 | 5.67 | 61.03 | 134.55 |
| 1 | 9/32 | .28125 | 7.14375 | 180 | 11.25 | 5.103 | 54.93 | 121.09 |
| 2 | 17/64 | .265625 | 6.746875 | 170 | 10.625 | 4.819 | 51.88 | 114.37 |
| 3 | 1/4 | .25 | 6.35 | 160 | 10 | 4.536 | 48.82 | 107.64 |
| 4 | 15/64 | .234375 | 5.953125 | 150 | 9.375 | 4.252 | 45.77 | 100.91 |
| 5 | 7/32 | .21875 | 5.55625 | 140 | 8.75 | 3.969 | 42.72 | 94.18 |
| 6 | 13/64 | .203125 | 5.159375 | 130 | 8.125 | 3.685 | 39.67 | 87.45 |
| 7 | 3/16 | .1875 | 4.7625 | 120 | 7.5 | 3.402 | 36.62 | 80.72 |
| 8 | 11/64 | .171875 | 4.365625 | 110 | 6.875 | 3.118 | 33.57 | 74.00 |
| 9 | 5/32 | .15625 | 3.96875 | 100 | 6.25 | 2.835 | 30.52 | 67.27 |
| 10 | 9/64 | .140625 | 3.571875 | 90 | 5.625 | 2.552 | 27.46 | 60.55 |
| 11 | 1/8 | .125 | 3.175 | 80 | 5 | 2.268 | 24.41 | 53.82 |
| 12 | 7/64 | .109375 | 2.778125 | 70 | 4.375 | 1.984 | 21.36 | 47.09 |
| 13 | 3/32 | .09375 | 2.38125 | 60 | 3.75 | 1.701 | 18.31 | 40.36 |
| 14 | 5/64 | .078125 | 1.984375 | 50 | 3.125 | 1.417 | 15.26 | 33.64 |
| 15 | 9/128 | .0703125 | 1.7859375 | 45 | 2.8125 | 1.276 | 13.73 | 30.27 |
| 16 | 1/16 | .0625 | 1.5875 | 40 | 2.5 | 1.134 | 12.21 | 26.91 |
| 17 | 9/160 | .05625 | 1.42875 | 36 | 2.25 | 1.021 | 10.99 | 24.22 |
| 18 | 1/20 | .05 | 1.27 | 32 | 2 | .9072 | 9.765 | 21.53 |
| 19 | 7/160 | .04375 | 1.11125 | 28 | 1.75 | .7938 | 8.544 | 18.84 |
| 20 | 3/80 | .0375 | .9525 | 24 | 1.50 | .6804 | 7.324 | 16.15 |
| 21 | 11/320 | .034375 | .873125 | 22 | 1.375 | .6237 | 6.713 | 14.80 |
| 22 | 1/32 | .03125 | .793750 | 20 | 1.25 | .567 | 6.103 | 13.46 |
| 23 | 9/320 | .028125 | .714375 | 18 | 1.125 | .5103 | 5.493 | 12.11 |
| 24 | 1/40 | .025 | .635 | 16 | 1 | .4536 | 4.882 | 10.76 |
| 25 | 7/320 | .021875 | .555625 | 14 | .875 | .3969 | 4.272 | 9.42 |
| 26 | 3/160 | .01875 | .47625 | 12 | .75 | .3402 | 3.662 | 8.07 |
| 27 | 11/640 | .0171875 | .4365625 | 11 | .6875 | .3119 | 3.357 | 7.40 |
| 28 | 1/64 | .015625 | .396875 | 10 | .625 | .2835 | 3.052 | 6.73 |
| 29 | 9/640 | .0140625 | .3571875 | 9 | .5625 | .2551 | 2.746 | 6.05 |
| 30 | 1/80 | .0125 | .3175 | 8 | .5 | .2268 | 2.441 | 5.38 |
| 31 | 7/640 | .0109375 | .2778125 | 7 | .4375 | .1984 | 2.136 | 4.71 |
| 32 | 13/1280 | .01015625 | .25796875 | 6½ | .40625 | .1843 | 1.983 | 4.37 |
| 33 | 3/320 | .009375 | .238125 | 6 | .375 | .1701 | 1.831 | 4.04 |
| 34 | 11/1280 | .00859375 | .21828125 | 5½ | .34375 | .1559 | 1.678 | 3.70 |
| 35 | 5/640 | .0078125 | .1984375 | 5 | .3125 | .1417 | 1.526 | 3.36 |
| 36 | 9/1280 | .00703125 | .17859375 | 4½ | .28125 | .1276 | 1.373 | 3.03 |
| 37 | 17/2560 | .006640625 | .168671875 | 4¼ | .265625 | .1205 | 1.297 | 2.87 |
| 38 | 1/160 | .00625 | .15875 | 4 | .25 | .1134 | 1.221 | 2.69 |
The same and no other shall be used in determining duties and taxes levied by the United States of America on sheet and plate iron and steel. But this subchapter shall not be construed to increase duties upon any articles which may be imported.
References in Text
This subchapter, referred to in text, was in the original "this act", meaning act Mar. 3, 1893, ch. 221, 27 Stat. 746, which is classified to sections 206 to 208 of this title.
Tried the LawStack mobile app?
Join thousands and try LawStack mobile for FREE today.
- Carry the law offline, wherever you go.
- Download CFR, USC, rules, and state law to your mobile device.
