16 CFR Subpart A
The Standard
February 12, 2021
§
1209.1
Scope and application
§
1209.2
Definitions and measurements
§
1209.3
General requirements
§
1209.4
Test procedures for determining settled density
§
1209.5
Test procedures for corrosiveness
§
1209.6
Test procedures for critical radiant flux
§
1209.7
Test procedures for smoldering combustion
§
1209.8
Procedure for calibration of radiation instrumentation
§
1209.9
Labeling requirement
§
1209.10
Certification and enforcement
§
1209.11
Effective date
Figure
1
Figure 1 to Subpart A of Part 1209—Partial Insulation Preparation Apparatus
Figure
2
Figure 2 to Subpart A of Part 1209—Cyclone Receiver Weldment
Figure
3
Figure 3 to Subpart A of Part 1209—Flooring Radiant Tester Schematic Side Elevation
Figure
4
Figure 4 to Subpart A of Part 1209—Flooring Radiant Panel Tester Schematic Low Flux End, Elevation
Figure
5
Figure 5 to Subpart A of Part 1209—Zero Reference Point Related to Detecting Plane
Figure
6
Figure 6 to Subpart A of Part 1209—Dummy Specimen in Specimen Holder
Figure
7
Figure 7 to Subpart A of Part 1209—Specimen Tray
Figure
8
Figure 8 to Subpart A of Part 1209—Standard Radiant Heat Energy Flux Profile
Figure
9
Figure 9 to Subpart A of Part 1209—Flux Profile Data Log Format
Figure
10
Figure 10 to Subpart A of Part 1209—Insulation Radiant Panel Test Data Log Format
Tried the LawStack mobile app?
Join thousands and try LawStack mobile for FREE today.
- Carry the law offline, wherever you go.
- Download CFR, USC, rules, and state law to your mobile device.
