19 CFR Appendix A

General Manufacturing Drawback Rulings

July 16, 2020

CFR

I. General Instructions

II. General Manufacturing Drawback Ruling Under 19 U.S.C. 1313(a) (T.D. 81-234; T.D. 83-123)

III. General Manufacturing Drawback Ruling Under 19 U.S.C. 1313(a) or 1313(b) for Agents (T.D. 81-181)

IV. General Manufacturing Drawback Ruling Under 19 U.S.C. 1313(a) for Burlap or Other Textile Material (T.D. 83-53)

V. General Manufacturing Drawback Ruling Under 19 U.S.C. 1313(b) for Component Parts (T.D. 81-300)

VI. General Manufacturing Drawback Ruling Under 19 U.S.C. 1313(a) for Flaxseed (T.D. 83-80)

VII. General Manufacturing Drawback Ruling Under 19 U.S.C. 1313(a) for Fur Skins or Fur Skin Articles (T.D. 83-77)

VIII. General Manufacturing Drawback Ruling Under 19 U.S.C. 1313(b) for Orange Juice (T.D. 85-110)

IX. General Manufacturing Drawback Ruling Under 19 U.S.C. 1313(b) for Petroleum or Petroleum Derivatives (T.D. 84-49)

X. General Manufacturing Drawback Ruling Under 19 U.S.C. 1313(b) for Piece Goods (T.D. 83-73)

XI. General Manufacturing Drawback Ruling Under 19 U.S.C. 1313(b) for Raw Sugar (T.D. 83-59)

XII. General Manufacturing Drawback Ruling Under 19 U.S.C. 1313(b) for Steel (T.D. 81-74)

XIII. General Manufacturing Drawback Ruling Under 19 U.S.C. 1313(b) for Sugar (T.D. 81-92)

XIV. General Manufacturing Drawback Ruling Under 19 U.S.C. 1313(a) for Woven Piece Goods (T.D. 83-84)

I. General Instructions

A. There follow various general manufacturing drawback rulings which have been designed to simplify drawback procedures. Any person that can comply with the conditions of any one of these rulings may notify a CBP drawback office of its intention to operate under the ruling (see §190.7). The letter of notification must be sent, electronically, to the drawback offices at the below listed email accounts:

[email protected]

Such letter of notification must include the following information:

1. Name and address of manufacturer or producer;

2. IRS (Internal Revenue Service) number (with suffix) of manufacturer or producer;

3. Location[s] of factory[ies] which will operate under the general ruling;

4. If a business entity, names of persons who will sign drawback documents (see §190.6);

5. Identity (by T.D. number and title, as stated in this Appendix) of general manufacturing drawback ruling under which the manufacturer or producer intends to operate;

6. Description of the merchandise and articles, unless specifically described in the general manufacturing drawback ruling, and 8-digit HTSUS subheading number, and the quantity of the merchandise;

7. Only for General Manufacturing Drawback Ruling Under 19 U.S.C. 1313(b) for Petroleum or Petroleum Derivatives, the name of each article to be exported or, if the identity of the product is not clearly evident by its name, what the product is, and the abstract period to be used for each refinery (monthly or other specified period (not to exceed 1 year)), subject to the conditions in the General Manufacturing Drawback Ruling Under 19 U.S.C. 1313(b) for Petroleum or Petroleum Derivatives, I. Procedures and Records Maintained, 4(a) or (b);

8. Basis of claim used for calculating drawback; and

9. Description of the manufacturing or production process, unless specifically described in the general manufacturing drawback ruling.

For the General Manufacturing Drawback Ruling under §1313(a), the General Manufacturing Drawback Ruling Under 19 U.S.C. 1313(b) for Component Parts, and the General Manufacturing Drawback Ruling Under 19 U.S.C. 1313(a) or 1313(b) for Agents, if the drawback office has doubts as to whether there is a manufacture or production, as defined in §190.2, the manufacturer or producer will be asked to provide details of the operation purported to be a manufacture or production.

10. For the General Manufacturing Drawback Ruling where substituted merchandise will be used, include the bill of materials, and/or formulas annotated with the 8-digit HTSUS classifications.

B. These general manufacturing drawback rulings supersede general “contracts” previously published under the following Treasury Decisions (T.D.s): 81-74, 81-92, 81-181, 81-234, 81-300, 83-53, 83-59, 83-73, 83-77, 83-80, 83-84, 83-123, 84-49, and 85-110.

Anyone currently operating under any of the above-listed Treasury Decisions will automatically be covered by the superseding general ruling, including all privileges of the previous “contract”.

II. General Manufacturing Drawback Ruling Under 19 U.S.C. 1313(a) (T.D. 81-234; T.D. 83-123)

A. Imported Merchandise or Drawback Products1 Used

1Drawback products are those produced in the United States in accordance with the drawback law and regulations.

Imported merchandise or drawback products are used in the manufacture of the exported articles upon which drawback claims will be based.

B. Exported Articles on Which Drawback Will Be Claimed

Exported articles on which drawback will be claimed must be manufactured in the United States using imported merchandise or drawback products.

C. General Statement

The manufacturer or producer manufactures or produces for its own account. The manufacturer or producer may manufacture or produce articles for the account of another or another manufacturer or producer may manufacture or produce for the account of the manufacturer or producer under contract within the principal and agency relationship outlined in T.D.s 55027(2) and 55207(1) (see §190.9).

D. Process of Manufacture or Production

The imported merchandise or drawback products will be used to manufacture or produce articles in accordance with §190.2.

E. Multiple Products

1. Relative Values

Drawback law mandates the assignment of relative values when two or more products necessarily are produced concurrently in the same operation. If multiple products are produced records, which may include records kept in the normal course of business, will be maintained of the market value of each product at the time it is first separated in the manufacturing process.

2. Appearing-In Method

The appearing-in basis may not be used if multiple products are produced.

F. Loss or Gain

Records, which may include records kept in the normal course of business, will be maintained showing the extent of any loss or gain in net weight or measurement of the imported merchandise, caused by atmospheric conditions, chemical reactions, or other factors.

G. [Reserved]

H. Stock in Process

Stock in process does not result; or if it does result, details will be given in claims as filed, and it will not be included in the computation of the merchandise used to manufacture the finished articles on which drawback is claimed.

I. Waste

No drawback is payable on any waste which results from the manufacturing operation. Unless the claim for drawback is based on the quantity of merchandise appearing in the exported articles, records will be maintained to establish the value, quantity, and disposition of any waste that results from manufacturing the exported articles. If no waste results, records will be maintained to establish that fact.

J. Procedures and Records Maintained

Records, which may include records kept in the normal course of business, will be maintained to establish:

1. That the exported articles on which drawback is claimed were produced with the use of the imported merchandise, and

2. The quantity of imported merchandise2 used in producing the exported articles.

2If claims are to be made on an “appearing in” basis, the remainder of the sentence should read “appearing in the exported articles.”

(To obtain drawback the claimant must establish that the completed articles were exported within 5 years after importation of the imported merchandise. Records establishing compliance with these requirements must be available for audit by CBP during business hours. Drawback is not payable without proof of compliance).

K. Inventory Procedures

L. Basis of Claim for Drawback

Drawback will be claimed on the full quantity of merchandise used in producing the exported articles only if there is no waste or valueless or unrecovered waste in the manufacturing operation. A drawback claim may be based on the quantity of eligible merchandise that appears in the exported articles, regardless of whether there is waste, and no records of waste need be maintained. If there is valuable waste recovered from the manufacturing operation and records are kept which show the quantity and value of the waste, drawback may be claimed on the quantity of eligible material used to produce the exported articles less the amount of that merchandise which the value of the waste would replace.

M. General Requirements

The manufacturer or producer must:

1. Comply fully with the terms of this general ruling when claiming drawback;

2. Open its factory and records for examination at all reasonable hours by authorized Government officers;

3. Keep its drawback related records and supporting data for at least 3 years from the date of liquidation of any drawback claim predicated in whole or in part upon this general ruling;

4. Keep its letter of notification of intent to operate under this general ruling current by reporting promptly to the drawback office which liquidates its claims any changes in the information required by the General Instructions of this Appendix (I. General Instructions, 1 through 10), the corporate name, or corporate organization by succession or reincorporation;

5. Keep a copy of this general ruling on file for ready reference by employees and require all officials and employees concerned to familiarize themselves with the provisions of this general ruling; and

6. Issue instructions to insure proper compliance with title 19, United States Code, section 1313, part 190 of the CBP Regulations and this general ruling.

III. General Manufacturing Drawback Ruling Under 19 U.S.C. 1313(a) or 1313(b) for Agents (T.D. 81-181)

Manufacturers or producers operating under this general manufacturing drawback ruling must comply with T.D.s 55027(2) and 55207(1), and 19 U.S.C. 1313(b), if applicable, as well as 19 CFR part 190 (see particularly, §190.9).

A. Name and Address of Principal

B. Process of Manufacture or Production

The imported merchandise or drawback products or other substituted merchandise will be used to manufacture or produce articles in accordance with §190.2.

C. Procedures and Records Maintained

Records, which may include records kept in the normal course of business, will be maintained to establish:

1. Quantity, identity, and 8-digit HTSUS subheading number of merchandise transferred from the principal to the agent;

2. Date of transfer of the merchandise from the principal to the agent;

3. Date of manufacturing or production operations performed by the agent;

4. Total quantity and description of merchandise (including 8-digit HTSUS subheading number) appearing in or used in manufacturing or production operations performed by the agent;

5. Total quantity and description of articles (including 8-digit HTSUS subheading number) produced in manufacturing or production operations performed by the agent;

6. Quantity, identity, and 8-digit HTSUS subheading number of articles transferred from the agent to the principal; and

7. Date of transfer of the articles from the agent to the principal.

D. General Requirements

The manufacturer or producer will:

1. Comply fully with the terms of this general ruling when manufacturing or producing articles for account of the principal under the principal's general manufacturing drawback ruling or specific manufacturing drawback ruling, as appropriate;

2. Open its factory and records for examination at all reasonable hours by authorized Government officers;

3. Keep its drawback related records and supporting data for at least 3 years from the date of liquidation of any drawback claim predicated in whole or in part upon this general ruling;

4. Keep its letter of notification of intent to operate under this general ruling current by reporting promptly to the drawback office which liquidates the claims any changes in the information required by the General Instructions of this Appendix (I. General Instructions, 1 through 10), the corporate name, or corporate organization by succession or reincorporation;

6. Issue instructions to help ensure proper compliance with title 19, United States Code, section 1313, part 190 of the CBP Regulations and this general ruling.

IV. General Manufacturing Drawback Ruling Under 19 U.S.C. 1313(a) for Burlap or Other Textile Material (T.D. 83-53)

Drawback may be allowed under 19 U.S.C. 1313(a) upon the exportation of bags or meat wrappers manufactured with the use of imported burlap or other textile material, subject to the following special requirements:

A. Imported Merchandise or Drawback Products1 Used

1Drawback products are those produced in the United States in accordance with the drawback law and regulations.

Imported merchandise or drawback products (burlap or other textile material) are used in the manufacture of the exported articles upon which drawback claims will be based.

B. Exported Articles on Which Drawback Will Be Claimed

Exported articles on which drawback will be claimed must be manufactured in the United States using imported merchandise or drawback products.

C. General Statement

The manufacturer or producer manufactures or produces for its own account. The manufacturer or producer may manufacture or produce articles for the account of another, or another manufacturer or producer may manufacture or produce for the account of the manufacturer or producer under contract within the principal and agency relationship outlined in T.D.s 55027(2) and 55207(1) (see §190.9).

D. Process of Manufacture or Production

The imported merchandise or drawback products will be used to manufacture or produce articles in accordance with §190.2.

E. Multiple Products

Not applicable.

F. Loss or Gain

Not applicable.

G. Waste

H. Procedures and Records Maintained

Records, which may include records kept in the normal course of business, will be maintained to establish:

1. That the exported articles on which drawback is claimed were produced with the use of the imported merchandise; and

2. The quantity of imported merchandise2 used in producing the exported articles.

2If claims are to be made on an “appearing in” basis, the remainder of the sentence should read “appearing in the exported articles.”

To obtain drawback, the claimant must establish that the completed articles were exported within 5 years after importation of the imported merchandise. Records establishing compliance with these requirements will be available for audit by CBP during business hours. Drawback is not payable without proof of compliance.

I. Inventory Procedures

The inventory records of the manufacturer or producer must show how the drawback recordkeeping requirements set forth in 19 U.S.C. 1313(a) and part 190 of the CBP Regulations will be met, as discussed under the heading “Procedures and Records Maintained”. If those records do not establish compliance with all legal requirements, drawback cannot be paid. Each lot of imported material received by a manufacturer or producer must be given a lot number and kept separate from other lots until used. The records of the manufacturer or producer must show, as to each manufacturing lot or period of manufacture, the 8-digit HTSUS classification, the quantity of material used from each imported lot, and the number of each kind and size of bags or meat wrappers obtained.

All bags or meat wrappers manufactured or produced for the account of the same exporter during a specified period may be designated as one manufacturing lot. All exported bags or meat wrappers must be identified by the exporter.

J. Basis of Claim for Drawback

K. General Requirements

The manufacturer or producer must:

1. Comply fully with the terms of this general ruling when claiming drawback;

2. Open its factory and records for examination at all reasonable hours by authorized Government officers;

3. Keep its drawback related records and supporting data for at least 3 years from the date of liquidation of any drawback claim predicated in whole or in part upon this general ruling;

6. Issue instructions to help ensure proper compliance with 19, United States Code, §1313, part 190 of the CBP Regulations and this general ruling.

V. General Manufacturing Drawback Ruling Under 19 U.S.C. 1313(b) for Component Parts (T.D. 81-300)

A. Same 8-Digit HTSUS Classification (Parallel Columns)

Open Table


Imported merchandise or drawback products¹ to be designated as the basis for drawback on the exported products	Duty-paid, duty-free, or domestic merchandise classifiable under the same 8-digit HTSUS subheading number as that designated which will be used in the production of the exported products.
Component parts identified by individual part numbers and 8-digit HTSUS subheading number	Component parts classifiable under the same 8-digit HTSUS subheading number and identified with the same individual part numbers as those in the column immediately to the left.

The designated components must be manufactured in accordance with the same specifications and from the same materials, and must be identified by the same 8-digit HTSUS classification and part number as the substituted components. Further, the designated and substituted components are used interchangeably in the manufacture of the exported articles upon which drawback will be claimed. Specifications or drawings will be maintained and made available for review by CBP Officials.

1Drawback products are those produced in the United States in accordance with the drawback law and regulations. Such products have “dual status” under section 1313(b). They may be designated as the basis for drawback and also may be deemed to be domestic merchandise.

B. Exported Articles on Which Drawback Will Be Claimed

The exported articles will have been manufactured in the United States using components described in the Parallel Columns above.

C. General Statement

D. Process of Manufacture or Production

The components described in the Parallel Columns will be used to manufacture or produce articles in accordance with §190.2.

E. Multiple Products

Not applicable.

F. Waste

No drawback is payable on any waste which results from the manufacturing operation. Unless the claim for drawback is based on the quantity of components appearing in the exported articles, records will be maintained to establish the value (or the lack of value), quantity, and disposition of any waste that results from manufacturing the exported articles. If no waste results, records will be maintained to establish that fact.

G. [Reserved]

H. Procedures and Records Maintained

Records, which may include records kept in the normal course of business, will be maintained to establish:

1. The identity and 8-digit HTSUS classification of the designated merchandise;

2. The quantity of merchandise classifiable under the same 8-digit HTSUS classification as the designated merchandise2 used to produce the exported articles;

2If claims are to be made on an “appearing in” basis, the remainder of this sentence should read “appearing in the exported articles produced.”

3. That, within 5 years after the date of importation of the designated merchandise, the manufacturer or producer used the merchandise to produce articles. During the same 5-year period, the manufacturer or producer produced3 the exported articles. To obtain drawback the claimant must establish that the completed articles were exported within 5 years after the importation of the imported merchandise. Records establishing compliance with these requirements will be available for audit by CBP during business hours. Drawback is not payable without proof of compliance.

3The date of production is the date an article is completed.

I. Inventory Procedures

The inventory records of the manufacturer or producer must show how the drawback recordkeeping requirements set forth in 19 U.S.C. 1313(b) and part 190 of the CBP Regulations will be met, as discussed under the heading “Procedures and Records Maintained”. If those records do not establish satisfaction of all legal requirements, drawback cannot be paid.

J. Basis of Claim for Drawback

Drawback will be claimed on the quantity of eligible components used in producing the exported articles only if there is no waste or valueless or unrecovered waste in the manufacturing operation. Drawback may be claimed on the quantity of eligible components that appear in the exported articles, regardless of whether there is waste, and no records of waste need be maintained. If there is valuable waste recovered from the manufacturing operation and records are kept which show the quantity and value of the waste, drawback may be claimed on the quantity of eligible components used to produce the exported articles less the amount of those components which the value of the waste would replace.

K. General Requirements

The manufacturer or producer will:

1. Comply fully with the terms of this general ruling when claiming drawback;

2. Open its factory and records for examination at all reasonable hours by authorized Government officers;

3. Keep its drawback related records and supporting data for at least 3 years from the date of liquidation of any drawback claim predicated in whole or in part upon this general ruling;

6. Issue instructions to insure proper compliance with title 19, United States Code, section 1313, part 190 of the CBP Regulations and this general ruling.

VI. General Manufacturing Drawback Ruling Under 19 U.S.C. 1313(a) for Flaxseed (T.D. 83-80)

Drawback may be allowed under the provision of 19 U.S.C. 1313(a) upon the exportation of linseed oil, linseed oil cake, and linseed oil meal, manufactured or produced with the use of imported flaxseed, subject to the following special requirements:

A. Imported Merchandise or Drawback Products1 Used

1Drawback products are those produced in the United States in accordance with the drawback law and regulations.

Imported merchandise or drawback products (flaxseed) are used in the manufacture of the exported articles upon which drawback claims will be based.

B. Exported Articles on Which Drawback Will Be Claimed

Exported articles on which drawback will be claimed must be manufactured in the United States using imported merchandise or drawback products.

C. General Statement

D. Process of Manufacture or Production

The imported merchandise or drawback products will be used to manufacture or produce articles in accordance with §190.2.

E. Multiple Products

Drawback law mandates the assignment of relative values when two or more products necessarily are produced concurrently in the same operation. If multiple products are produced records will be maintained of the market value of each product at the time it is first separated in the manufacturing process (when a claim covers a manufacturing period, the entire period covered by the claim is the time of separation of the products and the value per unit of product is the market value for the period (see §§190.2, 190.22(e)). The “appearing in” basis may not be used if multiple products are produced.

F. Loss or Gain

Records will be maintained showing the extent of any loss or gain in net weight or measurement of the imported merchandise, caused by atmospheric conditions, chemical reactions, or other factors.

G. Waste

H. Procedures and Records Maintained

Records, which may include records kept in the normal course of business, will be maintained to establish:

1. That the exported articles on which drawback is claimed were produced with the use of the imported merchandise; and

2. The quantity of imported merchandise2 used in producing the exported articles.

2If claims are to be made on an “appearing in” basis, the remainder of the sentence should read “appearing in the exported articles.”

To obtain drawback the claimant must establish that the completed articles were exported within 5 years after importation of the imported merchandise. Records establishing compliance with these requirements will be available for audit by CBP during business hours. Drawback is not payable without proof of compliance.

I. Inventory Procedures

The inventory records of the manufacturer or producer will show: The inclusive dates of manufacture; the quantity, identity, value, and 8-digit HTSUS classification of the imported flaxseed or screenings, scalpings, chaff, or scourings used; the quantity by actual weight and value, if any, of the material removed from the foregoing by screening prior to crushing; the quantity and kind of domestic merchandise added, if any; the quantity by actual weight or gauge and value of the oil, cake, and meal obtained; and the quantity and value, if any, of the waste incurred. The quantity of imported flaxseed, screenings, scalpings, chaff, or scourings used or of material removed will not be estimated nor computed on the basis of the quantity of finished products obtained, but will be determined by actually weighing the said flaxseed, screenings, scalpings, chaff, scourings, or other material; or, at the option of the crusher, the quantities of imported materials used may be determined from CBP weights, as shown by the import entry covering such imported materials, and the Government weight certificate of analysis issued at the time of entry. The entire period covered by an abstract will be deemed the time of separation of the oil and cake covered thereby.

If the records of the manufacturer or producer do not show the quantity of oil cake used in the manufacture or production of the exported oil meal, and the quantity of oil meal obtained, the net weight of the oil meal exported will be regarded as the weight of the oil cake used in the manufacture thereof.

If various tanks are used for the storage of imported flaxseed, the mill records must establish the tank or tanks in which each lot or cargo is stored. If raw or processed oil manufactured or produced during different periods of manufacture is intermixed in storage, a record must be maintained showing the quantity, identity, and 8-digit HTSUS classification of oil so intermixed. The identity of the merchandise or articles in either instance must be in accordance with §190.14.

J. Basis of Claim for Drawback

K. General Requirements

The manufacturer or producer will:

1. Comply fully with the terms of this general ruling when claiming drawback;

2. Open its factory and records for examination at all reasonable hours by authorized Government officers;

3. Keep its drawback related records and supporting data for at least 3 years from the date of liquidation of any drawback claim predicated in whole or in part upon this general ruling;

6. Issue instructions to insure proper compliance with 19, United States Code, §1313, part 190 of the CBP Regulations and this general ruling.

VII. General Manufacturing Drawback Ruling Under 19 U.S.C. 1313(a) for Fur Skins or Fur Skin Articles (T.D. 83-77)

Drawback may be allowed under 19 U.S.C. 1313(a) upon the exportation of dressed, redressed, dyed, redyed, bleached, blended, or striped fur skins or fur skin articles manufactured or produced by any one, or a combination, of the foregoing processes, with the use of fur skins or fur skin articles, such as plates, mats, sacs, strips, and crosses, imported in a raw, dressed, or dyed condition, subject to the following special requirements:

A. Imported Merchandise or Drawback Products1 Used

1Drawback products are those produced in the United States in accordance with the drawback law and regulations.

Imported merchandise or drawback products (fur skins or fur skin articles) are used in the manufacture of the exported articles upon which drawback claims will be based.

B. Exported Articles on Which Drawback Will Be Claimed

Exported articles on which drawback will be claimed must be manufactured in the United States using imported merchandise or drawback products.

C. General Statement

D. Process of Manufacture or Production

The imported merchandise or drawback products will be used to manufacture or produce articles in accordance with §190.2.

Drawback will not be allowed under this general manufacturing drawback ruling when the process performed results only in the restoration of the merchandise to its condition at the time of importation.

E. Multiple Products

Not applicable.

F. Loss or Gain

Records will be maintained showing the extent of any loss or gain in net weight or measurement of the imported merchandise, caused by atmospheric conditions, chemical reactions, or other factors.

G. Waste

H. Procedures and Records Maintained

Records, which may include records kept in the normal course of business, will be maintained to establish:

1. That the exported articles on which drawback is claimed were produced with the use of the imported merchandise; and

2. The quantity of imported merchandise2 used in producing the exported articles.

2If claims are to be made on an “appearing in” basis, the remainder of the sentence should read “appearing in the exported articles.”

I. Inventory Procedures

The records of the manufacturer or producer must show, as to each lot of fur skins and/or fur skin articles used in the manufacture or production of articles for exportation with benefit of drawback, the lot number and date or inclusive dates of manufacture or production, the quantity, identity, description, and 8-digit HTSUS classification of the imported merchandise used, the condition in which imported, the process or processes applied thereto, the quantity, description, and 8-digit HTSUS classification of the finished articles obtained, and the quantity of imported pieces rejected, if any, or spoiled in manufacture or production.

J. Basis of Claim for Drawback

Drawback will be claimed on the quantity of merchandise used in producing the exported articles only if there is no waste or valueless or unrecovered waste in the manufacturing operation. Drawback may be claimed on the quantity of eligible merchandise that appears in the exported articles, regardless of whether there is waste, and no records of waste need be maintained. If there is valuable waste recovered from the manufacturing operation and records are kept which show the quantity and value of the waste, drawback may be claimed on the quantity of eligible material used to produce the exported articles, less the amount of that merchandise which the value of the waste would replace. (If rejects and/or spoilage are incurred, the quantity of imported merchandise used will be determined by deducting from the quantity of fur skins or fur skin articles put into manufacture or production the quantity of such rejects and/or spoilage.)

K. General Requirements

The manufacturer or producer will:

1. Comply fully with the terms of this general ruling when claiming drawback;

2. Open its factory and records for examination at all reasonable hours by authorized Government officers;

3. Keep its drawback related records and supporting data for at least 3 years from the date of liquidation of any drawback claim predicated in whole or in part upon this general ruling;

6. Issue instructions to insure proper compliance with 19, United States Code, §1313, part 190 of the CBP Regulations and this general ruling.

VIII. General Manufacturing Drawback Ruling Under 19 U.S.C. 1313(b) for Orange Juice (T.D. 85-110)

A. Same 8-Digit HTSUS Classification (Parallel Columns)

Open Table


Imported merchandise or drawback products¹ to be designated as the basis for drawback on the exported products	Duty-paid, duty-free, or domestic merchandise, classifiable under the same 8-digit HTSUS subheading number as that designated which will be used in the production of the exported products.
Concentrated orange juice for manufacturing (of not less than 55° Brix), as defined in the standard of identity of the Food and Drug Administration (21 CFR 146.53), which meets the Grade A standard of the U.S. Dept. of Agriculture (7 CFR 52.1557, Table IV)	Concentrated orange juice for manufacturing as described in the left-hand parallel column.

The imported merchandise designated on drawback claims must be classifiable under the same 8-digit HTSUS classification as the merchandise used in producing the exported articles on which drawback is claimed.

B. Exported Articles on Which Drawback Will Be Claimed

1. Orange juice from concentrate (reconstituted juice).

2. Frozen concentrated orange juice.

3. Bulk concentrated orange juice.

C. General Statement

D. Process of Manufacture or Production

1. Orange juice from concentrate (reconstituted juice). Concentrated orange juice for manufacturing is reduced to a desired 11.8° Brix by a blending process to produce orange juice from concentrate. The following optional blending processes may be used:

i. The concentrate is blended with fresh orange juice (single strength juice); or

ii. The concentrate is blended with essential oils, flavoring components, and water; or

iii. The concentrate is blended with water and is heat treated to reduce the enzymatic activity and the number of viable microorganisms.

2. Frozen concentrated orange juice. Concentrated orange juice for manufacturing is reduced to a desired degree Brix of not less than 41.8° Brix by the following optional blending processes:

i. The concentrate is blended with fresh orange juice (single strength juice); or

ii. The concentrate is blended with essential oils and flavoring components and water.

3. Bulk concentrated orange juice. Concentrated orange juice for manufacturing is blended with essential oils and flavoring components which would enable another processor such as a dairy to prepare finished frozen concentrated orange juice or orange juice from concentrate by merely adding water to the (intermediate) bulk concentrated orange juice.

E. Multiple Products, Waste, Loss or Gain

Not applicable.

F. [Reserved]

G. Procedures and Records Maintained

Records, which may include records kept in the normal course of business, will be maintained to establish:

1. The 8-digit HTSUS classification and identity of the designated merchandise;

2. The quantity of merchandise classifiable under the same 8-digit HTSUS classification as the designated merchandise2 used to produce the exported articles;

2If claims are to be made on an “appearing in” basis, the remainder of this sentence should read “appearing in the exported articles produced.”

3. That, within 5 years after the date of importation of the designated merchandise, the manufacturer or producer used the designated merchandise to produce articles. During the same 5-year period, the manufacturer or producer produced3 the exported articles.

3The date of production is the date an article is completed.

To obtain drawback it must be established that the completed articles were exported within 5 years after the importation of the imported merchandise. Records establishing compliance with these requirements must be available for audit by CBP during business hours. No drawback is payable without proof of compliance.

H. Inventory Procedures

The inventory records of the manufacturer or producer must show how the drawback recordkeeping requirements set forth in 19 U.S.C. 1313(b) and part 190 of the CBP Regulations will be met, as discussed under the heading “Procedures and Records Maintained”, and will show what components were blended with the concentrated orange juice for manufacturing. If those records do not establish satisfaction of all legal requirements drawback cannot be paid.

I. Basis of Claim for Drawback

The basis of claim for drawback will be the quantity of concentrated orange juice for manufacturing used in the production of the exported articles. It is understood that when fresh orange juice is used as “cutback”, it will not be included in the “pound solids” when computing the drawback due.

J. General Requirements

The manufacturer or producer will:

1. Comply fully with the terms of this general ruling when claiming drawback;

2. Open its factory and records for examination at all reasonable hours by authorized Government officers;

3. Keep its drawback related records and supporting data for at least 3 years from the date of liquidation of any drawback claim predicated in whole or in part upon this general ruling;

6. Issue instructions to insure proper compliance with title 19, United States Code, section 1313, part 190 of the CBP Regulations and this general ruling.

IX. General Manufacturing Drawback Ruling Under 19 U.S.C. 1313(b) for Petroleum or Petroleum Derivatives (T.D. 84-49)

A. Same 8-Digit HTSUS Classification (Parallel Columns)

Open Table


Imported merchandise or drawback products¹ to be designated as the basis for drawback on the exported products	Duty-paid, duty-free, or domestic merchandise, classifiable under the same 8-digit HTSUS subheading number as that designated which will be used in the production of the exported products.

B. Exported Articles Produced From Fractionation

1. Motor Gasoline

2. Aviation Gasoline

3. Special Naphthas

4. Jet Fuel

5. Kerosene & Range Oils

6. Distillate Oils

7. Residual Oils

8. Lubricating Oils

9. Paraffin Wax

10. Petroleum Coke

11. Asphalt

12. Road Oil

13. Still Gas

14. Liquified Petroleum Gas

15. Petrochemical Synthetic Rubber

16. Petrochemical Plastics & Resins

17. All Other Petrochemical Products

C. Exported Articles on Which Drawback Will Be Claimed

See the General Instructions, I.A.7., for this general drawback ruling. Each article to be exported must be named. When the identity of the product is not clearly evident by its name, there must be a statement as to what the product is, e.g., a herbicide.

D. General Statement

E. Process of Manufacture or Production

Heated crude oil is charged to an atmospheric distillation tower where it is subjected to fractionation. The charge to the distillation tower consists of a single crude oil, or of commingled crudes which are fed to the tower simultaneously or after blending in a tank. During fractionation, components of different boiling ranges are separated.

F. Multiple Products

1. Relative Values

Fractionation results in 17 products. In order to insure proper distribution of drawback to each of these products, the manufacturer or producer agrees to record the relative values at the time of separation. The entire period covered by an abstract is to be treated as the time of separation. The value per unit of each product will be the average market value for the abstract period.

2. Producibility

The manufacturer or producer can vary the proportionate quantity of each product. The manufacturer or producer understands that drawback is payable on exported products only to the extent that these products could have been produced from the designated merchandise. The records of the manufacturer or producer must show that all of the products exported, for which drawback will be claimed under this general manufacturing drawback ruling could, have been produced concurrently on a practical operating basis from the designated merchandise.

The manufacturer or producer agrees to establish the amount to be designated by reference to the Industry Standards of Potential Production published in T.D. 66-16.2

2A manufacturer who proposes to use standards other than those in T.D. 66-16 must state the proposed standards and provide sufficient information to CBP in order for those proposed standards to be verified in accordance with T.D. 84-49.

There are no valuable wastes as a result of the processing.

G. Loss or Gain

Because the manufacturer or producer keeps records on a volume basis rather than a weight basis, it is anticipated that the material balance will show a volume gain. For the same reason, it is possible that occasionally the material balance will show a volume loss. Fluctuations in type of crude used, together with the type of finished product desired make an estimate of an average volume gain meaningless. However, records will be kept to show the amount of loss or gain with respect to the production of export products.

H. Exchange

The use of any domestic merchandise acquired in exchange for imported merchandise that meets the same kind and quality specifications contained in the Parallel Columns of this general ruling shall be treated as use of the imported merchandise.

I. Procedures and Records Maintained

Records, which may include records kept in the normal course of business, will be maintained to establish:

1. The identity, and 8-digit HTSUS classification of the merchandise designated;

2. The quantity of merchandise classifiable under the same 8-digit HTSUS classification as the designated merchandise used to produce the exported articles.

3. That, within 5 years after importation, the manufacturer or producer used the designated merchandise to produce articles. During the same 5-year period, the manufacturer or producer produced the exported articles.

4(a). The manufacturer or producer agrees to use a 28-31 day period (monthly) abstract period for each refinery covered by this general manufacturing drawback ruling, or

(b). The manufacturer or producer agrees to use an abstract period (not to exceed 1 year) for each refinery covered by this general manufacturing drawback ruling. The manufacturer or producer certifies that if it were to file abstracts covering each manufacturing period, of not less than 28 days and not more than 31 days (monthly) within the longer period, in no such monthly abstract would the quantity of designated merchandise exceed the material introduced into the manufacturing process during that monthly period. (Select (a) or (b), and state which is selected in the application, and, if (b) is selected, specify the length of the particular abstract period chosen (not to exceed 1 year (see General Instruction I.A.7.)).)

5. On each abstract of production the manufacturer or producer agrees to show the value per barrel to five decimal places.

6. The manufacturer or producer agrees to file claims in the format set forth in exhibits A through F which are attached to this general manufacturing drawback ruling. The manufacturer or producer realizes that to obtain drawback the claimant must establish that the completed articles were exported within 5 years after importation of the imported merchandise. Records establishing compliance with these requirements will be available for audit by CBP during business hours. It is understood that drawback is not payable without proof of compliance. Records will be kept in accordance with T.D. 84-49, as amended by T.D. 95-61.

J. Residual Rights

It is understood that the refiner can reserve as the basis for future payment the right to drawback only on the number of barrels of raw material computed by subtracting from Line E the larger of Lines A or B, of a given Exhibit E. It is further understood that this right to future payment can be claimed only against products concurrently producible with the products listed in Column 21, in the quantities shown in Column 22 of such Exhibit E. Such residual right can be transferred to another refinery of the same refiner only when Line B of Exhibit E is larger than Line A. Unless the number of residual barrels is specifically computed, and rights thereto are expressly reserved on Exhibit E, such residual rights will be deemed waived. The procedure the manufacturer or producer must follow in preparing drawback entries claiming this residual right is illustrated in the attached sample Exhibit E-1. It is understood that claims involving residual rights must be filed only at the port where the Exhibit E reserving such right was filed.

K. Inventory Procedures

The manufacturer or producer realizes that inventory control is of major importance. In accordance with the normal accounting procedures of the manufacturer or producer, each refinery prepares a monthly stock and yield report, which accounts for inventories, production, and disposals, from time of receipt to time of disposition. This provides an audit trail of all products.

The above-noted records will provide the required audit trail from the initial source documents to the drawback claims of the manufacturer or producer and will support adherence with the requirements discussed under the heading Procedures and Records Maintained.

L. Basis of Claim for Drawback

The amount of raw material on which drawback may be based will be computed by multiplying the quantity of each product exported by the drawback factor for that product. The amount of raw material which may be designated as the basis for drawback on the exported products produced at a given refinery and covered by a drawback entry must not exceed the quantity of such raw material used at the refinery during the abstract period or periods from which the exported products were produced. The quantity of raw material to be designated as the basis for drawback on exported products must be at least as great as the quantity of raw material which would be required to produce the exported products in the quantities exported.

M. Agreements

The manufacturer or producer specifically agrees that it will:

1. Comply fully with the terms of this general ruling when claiming drawback;

2. Open its refinery and records for examination at all reasonable hours by authorized Government officers;

3. Keep its drawback related records and supporting data for at least 3 years from the date of liquidation of any drawback claim predicated in whole or in part upon this application;

4. Keep this application current by reporting promptly to the drawback office which liquidates its claims any changes in the information required by the General Instructions of this Appendix (I. General Instructions, 1 through 10), the corporate name, or corporate organization by succession or reincorporation;

6. Issue instructions to insure proper compliance with title 19, United States Code, section 1313, part 190 of the CBP Regulations and this general ruling.

Exhibit C—Inventory Control Sheet: ABC Oil Co., Inc.; Beaumont, Texas Refinery,

Period From January 1, 2019 to January 31, 2019

[All quantities exclude non-petroleum additives]

Open Table

	Aviation gasoline		Residual oils		Lubricating oils		Petrochemicals, all other
	Bbls.	Drawback factor	Bbls.	Drawback factor	Bbls.	Drawback factor	Bbls.	Drawback factor
(10) Opening Inventory	11,218	1.00126	21,221	.45962	9,242	4.52178	891	1.00244
(11) Production	108,269	1.01300	308,002	.43642	292,492	4.64041	7,996	1.07895
(11-A) Receipts
(12) Exports	11,218 176	1.00126 1.01300	21,221 104,397	.45962 .43642	8,774	4.52178	195	1.00244
(13) Drawback Deliveries							696 319	1.00244 1.07895
(14) Domestic Shipments	97,863	1.01300	180,957	.43642	468 278,286	4.52178 4.64041	6,867	1.07895
(15) Closing Inventory	10,230	1.01300	22,648	.43642	14,206	4.64041	810	1.07895

Line (10)—Opening inventory from previous period's closing inventory.

Line (11)—From production period under consideration.

Line (11-A)—Product received from other sources.

Line (12)—From earliest on hand (inventory or production). Totals from drawback entry or entries recapitulated (see column 18).

Line (13)—Deliveries for export or for designation against further manufacture—earliest on hand after exports are deducted.

Line (14)—From earliest on hand after lines (12) and (13) are deducted.

Line (15)—Balance on hand.

Exhibit E (Combination)—Producibility Test for Products Exported (Including Drawback Deliveries) ABC Oil Co., Inc.; Beaumont, Texas Refinery, Period from January 1, 2019 to January 31, 2019

[Type and class of raw material designated—Crude, Class III]

Open Table

Product	Quantity in barrels	Industry standard (%)	Quantity of raw material of type and class designated needed to produce product per barrel	Drawback factor	Crude allowed for drawback
(21)	(22)	(23)	(24)	(19)	(20)
Aviation Gasoline¹	¹11,218 ¹176	40 40	28,045 440	1.00126 1.01300	11,232 178
Residual Oils¹	¹21,221 ¹104,397	83 83	25,567 125,780	.45962 .43642	9,754 45,561
Lubricating Oils¹	¹8,774	50	17,548	4.52178	39,674
Petrochemicals, Other¹	¹195	29	672	1.00244	195
Petrochemicals, Other²	²696	29	2,400	1.00244	698
Petrochemicals, Other²	²319	29	1,100	1.07895	344
Total	146,996				107,636

¹Exports.

²Drawback deliveries.

A—Crude allowed (column 20: 107,636 bbls. (106,594 for export, plus 1,042 for drawback deliveries)).

B—Total quantity exported (including drawback deliveries) (column 22): 146,996.

C—Largest quantity of raw material needed to produce an individual exported product (see column 24): 151,347.

D—The excess of raw material over the largest of lines A, B, or C, required to produce concurrently on a practical operating basis, using the most efficient processing equipment existing within the domestic industry, the exported articles (including drawback deliveries) in the quantities exported (or delivered): None.

E—Minimum quantity of raw material required to be designated (which is A, B, or C, whichever is largest, plus D, if applicable): 151,347 bbs.

I hereby certify that all the above drawback deliveries and products exported by the Beaumont refinery of ABC Oil Co., Inc. during the period from January 1, 2019 to January 31, 2019, could have been produced concurrently on a practical operating basis from 151,347 barrels of imported Class III crude against which drawback is claimed.

Exhibit F—Designations for Drawback Claim, ABC Oil Co., Inc.; Beaumont, Texas Refinery

[Period from January 1, 2019 to January 31, 2019]

Open Table

Entry No.	Date of importation	Kind of materials	Quantity of materials in barrels	Date received	Date consumed	Rate of duty
26192	04/13/17	Class III Crude	75,125	04/13/17	May 2017	$.1050
23990	08/04/18	......do	37,240	08/04/18	Oct. 2018	.1050
22517	10/05/18	......do	38,982	10/05/18	Nov. 2018	.1050

X. General Manufacturing Drawback Ruling Under 19 U.S.C. 1313(b) for Piece Goods (T.D. 83-73)

A. Same 8-Digit HTSUS Classification (Parallel Columns)

Open Table


Imported merchandise or drawback products¹ to be designated as the basis for drawback on the exported products.	Duty-paid, duty-free or domestic merchandise classifiable under the same 8-digit HTSUS subheading number as that designated which will be used in the production of the exported products.
Piece goods.	Piece goods.

The piece goods used in manufacture will be classifiable under the same 8-digit HTSUS classification as the piece goods designated as the basis of claim for drawback, and are used interchangeably without change in manufacturing processes or resultant products (including, if applicable, multiple products), or wastes. Some tolerances between imported-designated piece goods and the used-exported piece goods will be permitted to accommodate variations which are normally found in piece goods. These tolerances are no greater than the tolerances generally allowed in the industry for piece goods classifiable under the same 8-digit HTSUS classification as follows:

1Drawback products are those produced in the United States in accordance with the drawback law and regulations. Such products have “dual status” under 19 U.S.C. 1313(b). They may be designated as the basis for drawback and also may be deemed to be domestic merchandise.

1. A 4% weight tolerance so that the piece goods used in manufacture will be not more than 4% lighter or heavier than the imported piece goods which will be designated;

2. A tolerance of 4% in the aggregate thread count per square inch so that the piece goods used in manufacture will have an aggregate thread count within 4%, more or less of the aggregate thread count of the imported piece goods which will be designated. In each case, the average yarn number of the domestic piece goods will be the same or greater than the average yarn number of the imported piece goods designated, and in each case, the substitution and tolerance will be employed only within the same family of fabrics, i.e., print cloth for print cloth, gingham for gingham, greige for greige, dyed for dyed, bleached for bleached, etc. The piece goods used in manufacture of the exported articles will be designated as containing the identical percentage of identical fibers as the piece goods designated as the basis for allowance of drawback; for example, piece goods containing 65% cotton and 35% dacron will be designated against the use of piece goods shown to contain 65% cotton and 35% dacron. The actual fiber composition may vary slightly from that described on the invoice or other acceptance of the fabric as having the composition described on documents in accordance with trade practices.

B. Exported Articles on Which Drawback Will Be Claimed

Finished piece goods.

C. General Statement

D. Process of Manufacture or Production

Piece goods are subject to any one of the following finishing productions:

1. Bleaching,

2. Mercerizing,

3. Dyeing,

4. Printing,

5. A combination of the above, or

6. Any additional finishing processes.

E. Multiple Products

Not applicable.

F. Waste

Rag waste may be incurred. No drawback is payable on any waste which results from the manufacturing operation. Unless the claim for drawback is based on the quantity of merchandise appearing in the exported articles, the records of the manufacturer or producer must show the quantity of rag waste, if any, and its value. In instances where rag waste occurs and it is impractical to account for the actual quantity of rag waste incurred, it may be assumed that such rag waste constituted 2% of the piece goods put into the finishing processes. If necessary to establish the quantity of merchandise (eligible piece goods) appearing in the exported articles, such waste records must also be kept.

G. Shrinkage, Gain, and Spoilage

Unless the claim for drawback is based on the quantity of merchandise appearing in the exported articles, the records of the manufacturer or producer must show the yardage lost by shrinkage or gained by stretching during manufacture or production, and the quantity of remnants resulting and of spoilage incurred, if any. If necessary to establish the quantity of merchandise (eligible piece goods) appearing in the exported articles, such records for shrinkage, gain and spoilage will also be kept.

H. [Reserved]

I. Procedures and Records Maintained

Records, which may include records kept in the normal course of business, will be maintained to establish:

1. The identity and 8-digit HTSUS classification of the designated merchandise;

2. The quantity of merchandise classifiable under the same 8-digit HTSUS classification as the designated merchandise2 used to produce the exported articles;

2If claims are to be made on an “appearing in” basis, the remainder of this sentence should read “appearing in the exported articles produced.”

3The date of production is the date an article is completed.

To obtain drawback the claimant must establish that the completed articles were exported within 5 years after the importation of the imported merchandise. Records establishing compliance with these requirements will be available for audit by CBP during business hours. Drawback is not payable without proof of compliance.

J. Inventory Procedures

K. Basis of Claim for Drawback

Drawback will be claimed on the quantity of eligible piece goods used in producing the exported articles only if there is no waste or valueless or unrecovered waste in the manufacturing operation. Drawback may be claimed on the quantity of eligible piece goods that appears in the exported articles, regardless of whether there is waste, and no records of waste need be maintained. If there is valuable waste recovered from the manufacturing operation and records are kept which show the quantity and value of the waste from each lot of piece goods, drawback may be claimed on the quantity of eligible piece goods used to produce the exported articles less the amount of piece goods which the value of the waste would replace.

L. General Requirements

The manufacturer or producer will:

1. Comply fully with the terms of this general ruling when claiming drawback;

2. Open its factory and records for examination at all reasonable hours by authorized Government officers;

3. Keep its drawback related records and supporting data for at least 3 years from the date of liquidation of any drawback claim predicated in whole or in part upon this general ruling;

6. Issue instructions to insure proper compliance with title 19, United States Code, section 1313, part 190 of the CBP Regulations and this general ruling.

XI. General Manufacturing Drawback Ruling Under 19 U.S.C. 1313(b) for Raw Sugar (T.D. 83-59)

Drawback may be allowed under 19 U.S.C. 1313(b) upon the exportation of hard or soft refined sugars and sirups manufactured from raw sugar, subject to the following special requirements:

A. The drawback allowance must not exceed an amount calculated pursuant to regulations prescribed by the Secretary of the Treasury, of the duties, taxes, and fees paid on a quantity of raw sugar designated by the refiner which contains a quantity of sucrose not in excess of the quantity required to manufacture the exported sugar or sirup, ascertained as provided in this general rule.

B. The refined sugars and sirups must have been manufactured with the use of duty-paid, duty-free, or domestic sugar, or combinations thereof, within 5 years after the date of importation, and must have been exported within 5 years from the date of importation of the designated sugar.

C. All granulated sugar testing by the polariscope 99.5 [degrees] and over will be deemed hard refined sugar. All refined sugar testing by the polariscope less than 99.5 [degrees] will be deemed soft refined sugar. All “blackstrap,” “unfiltered sirup,” and “final molasses” will be deemed sirup.

D. The imported duty-paid sugar selected by the refiner as the basis for the drawback claim (designated sugar) must be classifiable under the same 8-digit HTSUS classification as that used in the manufacture of the exported refined sugar or sirup and must have been used within 5 years after the date of importation. Duty-paid sugar which has been used at a plant of a refiner within 5 years after the date on which it was imported by such refiner may be designated as the basis for the allowance of drawback on refined sugars or sirups manufactured at another plant of the same refiner.

E. For the purpose of distributing the drawback, relative values must be established between hard refined (granulated) sugar, soft refined (various grades) sugar, and sirups at the time of separation. The entire period covered by an abstract will be deemed the time of separation of the sugars and sirups covered by such abstract.

F. The sucrose allowance per pound on hard refined (granulated) sugar established by an abstract, as provided for in this general ruling, will be applied to hard refined sugar commercially known as loaf, cut loaf, cube, pressed, crushed, or powdered sugar manufactured from the granulated sugar covered by the abstract.

G. The sucrose allowance per gallon on sirup established by an abstract, as provided for in this general ruling, will be applied to sirup further advanced in value by filtration or otherwise, unless such sirup is the subject of a special manufacturing drawback ruling.

H. As to each lot of imported or domestic sugar used in the manufacture of refined sugar or sirup on which drawback is to be claimed, the raw stock records must show the refiner's raw lot number, the number and character of the packages, the settlement weight in pounds, the settlement polarization, and the 8-digit HTSUS classification. Such records covering imported sugar must show, in addition to the foregoing, the import entry number, date of importation, name of importing carrier, country of origin, the Government weight, and the Government polarization.

I. The melt records must show the date of melting, the number of pounds of each lot of raw sugar melted, and the full analysis at melting.

J. There must be kept a daily record of final products boiled showing the date of the melt, the date of boiling, the magma filling serial number, the number of the vacuum pan or crystallizer filling, the date worked off, and the sirup filling serial number.

K. The sirup manufacture records must show the date of boiling, the period of the melt, the sirup filling serial number, the number of barrels in the filling, the magma filling serial number, the quantity of sirup, its disposition in tanks or barrels and the refinery serial manufacture number.

L. The refined sugar stock records must show the refinery serial manufacture number, the period of the melt, the date of manufacture, the grade of sugar produced, its polarization, the number and kind of packages, and the net weight. When soft sugars are manufactured, the commercial grade number and quantity of each must be shown.

M. Each lot of hard or soft refined sugar and each lot of sirup manufactured, regardless of the character of the containers or vessels in which it is packed or stored, must be marked immediately with the date of manufacture and the refinery manufacture number applied to it in the refinery records provided for and shown in the abstract, as provided for in this general ruling, from such records. If all the sugar or sirup contained in any lot manufactured is not intended for exportation, only such of the packages as are intended for exportation need be marked as prescribed above, provided there is filed with the drawback office immediately after such marking a statement showing the date of manufacture, the refinery manufacture number, the number of packages marked, and the quantity of sugar or sirup contained therein. No drawback will be allowed in such case on any sugar or sirup in excess of the quantity shown on the statement as having been marked. If any packages of sugar or sirup so marked are repacked into other containers, the new containers must be marked with the marks which appeared on the original containers and a revised statement covering such repacking and remarking must be filed with the drawback office. If sirups from more than one lot are stored in the same tank, the refinery records must show the refinery manufacture number and the quantity of sirup from each lot contained in such tank.

N. An abstract from the foregoing records covering manufacturing periods of not less than 1 month nor more than 3 months, unless a different period will have been authorized, must be filed when drawback is to be claimed on any part of the refined sugar or sirup manufactured during such period. Such abstract must be filed by each refiner with the drawback office where drawback claims are filed on the basis of this general ruling. Such abstract must consist of: (1) A raw stock record (accounting for Refiner's raw lot No., Import entry No., Packages No. and kind, Pounds, Polarization, By whom imported or withdrawn, Date of importation, Date of receipt by refiner, Date of melt, Importing carrier, Country of origin); (2) A melt record [number of pounds in each lot melted] (accounting for Lot No. Pounds, and Polarization degrees and pounds sucrose); (3) Sirup stock records (accounting for Date of boiling, Refinery serial manufacture No., Quantity of sirup in gallons, and Pounds sucrose contained therein); (4) Refined sugar stock record (accounting for Refinery serial production No., Date of manufacture, Hard or soft refined, Polarization and No., Net weight in pounds); (5) Recapitulation (consisting of (in pounds): (a) Sucrose in process at beginning of period, (b) sucrose melted during period, (c) sucrose in process at end of period, (d) sucrose used in manufacture, and (e) sucrose contained in manufacture, in which item (a) plus item (b), minus item (c), should equal item (d)); and (6) A statement as follows:

I, ________, the ________ refiner at the ________ refinery of ________, located at ________, do solemnly and truly declare that each of the statements contained in the foregoing abstract is true to the best of my knowledge and belief and can be verified by the refinery records, which have been kept in accordance with Treasury Decision 83-59 and Appendix A of 19 CFR part 190 and which are at all times open to the inspection of CBP.

Date

Signature

O. The refiner must file with each abstract a statement, showing the average market values of the products specified in the abstract and including a statement as follows: I, ________, (Official capacity) of the ________ (Refinery), do solemnly and truly declare that the values shown above are true to the best of my knowledge and belief, and can be verified by our records.

Date

Signature

P. At the end of each calendar month the refiner must furnish to the drawback office a statement showing the actual sales of sirup and the average market values of refined sugars for the calendar month.

Q. The sucrose allowance to be applied to the various products based on the abstract and statement provided for in this general ruling will be in accordance with the example set forth in Treasury Decision 83-59.

R. [Reserved]

S. Drawback entries under this general ruling must state the polarization in degrees and the sucrose in pounds for the designated imported sugar. Drawback claims under this general ruling must include a statement as follows:

I, ________, the ________ of ________, located at ________ declare that the sugar (or sirup) described in this entry, was manufactured by said company at its refinery at ________ and is part of the sugar (or sirup) covered by abstract No. ____, filed at the port of ________; that, subject to 19 U.S.C. 1508 and 1313(t), the refinery and other records of the company verifying the statements contained in said abstract are now and at all times hereafter will be open to inspection by CBP. I further declare that the above-designated imported sugar (upon which the duties have been paid) was received by said company on ________ and was used in the manufacture of sugar and sirup during the period covered by abstract No. ____, CBP No. ____, on file with the port director at ________. I further declare that the sugar or sirup specified therein was exported as stated in the entry.

Date

Signature

T. General Statement. The refiner manufactures or produces for its own account. The refiner may manufacture or produce articles for the account of another or another manufacturer or producer may manufacture or produce for the refiner's account under contract within the principal and agency relationship outlined in T.D.s 55027(2) and 55207(1) (see §190.9).

U. Waste. No drawback is payable on any waste which results from the manufacturing operation. Unless drawback claims are based on the “appearing in” method, records will be maintained to establish the value (or the lack of value), quantity, and disposition of any waste that results from manufacturing the exported articles. If no waste results, records to establish that fact will be maintained.

V. Loss or Gain. The refiner will maintain records showing the extent of any loss or gain in net weight or measurement of the sugar caused by atmospheric conditions, chemical reactions, or other factors.

W. [Reserved]

X. Procedures and Records Maintained.

Records, which may include records kept in the normal course of business, will be maintained to establish:

1. The identity and 8-digit HTSUS classification of the designated merchandise;

2. The quantity of merchandise classifiable under the same 8-digit HTSUS classification as the designated merchandise1 used to produce the exported articles; and

1If claims are to be made on an “appearing in” basis, the remainder of this sentence should read “appearing in the exported articles produced.”

3. That, within 5 years of the date of importation of the designated merchandise, the refiner used the designated merchandise to produce articles. During the same 5-year period, the refiner produced2 the exported articles.

2The date of production is the date an article is completed.

Y. General requirements. The refiner will:

1. Comply fully with the terms of this general ruling when claiming drawback;

2. Open its factory and records for examination at all reasonable hours by authorized Government officers;

3. Keep its drawback related records and supporting data for at least 3 years from the date of liquidation of any drawback claim predicated in whole or in part upon this general ruling;

6. Issue instructions to insure proper compliance with title 19, United States Code, section 1313, part 190 of the CBP Regulations and this general ruling.

XII. General Manufacturing Drawback Ruling Under 19 U.S.C. 1313(b) for Steel (T.D. 81-74)

A. Same 8-Digit HTSUS Classification (Parallel Columns)

Open Table


Imported merchandise or drawback products¹ to be designated as the basis for drawback on the exported products.	Duty-paid, duty-free or domestic merchandise classifiable under the same 8-digit HTSUS subheading number as that designated which will be used in the production of the exported products.
Steel of one general class, e.g., an ingot, falling within on SAE, AISI, or ASTM² specification and, if the specification contains one or more grades, falling within one grade of the specification.	Steel of the same general class, specification, and grade as the steel in the column immediately to the left hereof.

1. The duty-paid, duty-free, or domestic steel used instead of the imported, duty-paid steel (or drawback products) will be interchangeable for manufacturing purposes with the duty-paid steel. To be interchangeable a steel must be able to be used in place of the substituted steel without any additional processing step in the manufacture of the article on which drawback is to be claimed.

2Standards set by the Society of Automotive Engineers (SAE), the American Iron and Steel Institute (AISI), or the American Society for Testing and Materials (ASTM).

2. Because the duty-paid steel (or drawback products) that is to be designated as the basis for drawback is dutiable according to its value, the amount of duty can vary with its size (gauge, width, or length) or composition (e.g., chrome content). If such variances occur, designation will be by “price extra,” and in no case will drawback be claimed in a greater amount than that which would have accrued to that steel used in manufacture of or appearing in the exported articles. Price extra is not available for coated or plated steel, covered in paragraph 4, infra, insofar as the coating or plating is concerned.

3. If the steel is coated or plated with a base metal, in addition to meeting the requirements for uncoated or unplated steel set forth in the Parallel Columns, the base-metal coating or plating on the duty-paid, duty-free, or domestic steel used in place of the duty-paid steel (or drawback products) will have the same composition and thickness as the coating or plating on the duty-paid steel. If the coated or plated duty-paid steel is within an SAE, AISI, ASTM specification, then any duty-paid, duty-free, or domestic coated or plated steel must be covered by the same specification and grade (if two or more grades are in the specification).

B. Exported Articles on Which Drawback Will Be Claimed

The exported articles will have been manufactured in the United States using steels described in the Parallel Columns above.

C. General Statement

The manufacturer or producer manufactures or produces for its own account.

The manufacturer or producer may manufacture or produce articles for the account of another or another manufacturer or producer may manufacture or produce for the account of the manufacturer or producer under contract within the principal and agency relationship outlined in T.D.s 55027(2) and 55207(1) (see §190.9).

D. Process of Manufacture or Production

The steel described in the Parallel Columns will be used to manufacture or produce articles in accordance with §190.2.

E. Multiple Products

Not applicable.

F. Waste

No drawback is payable on any waste which results from the manufacturing operation. Unless the claim for drawback is based on the quantity of steel appearing in the exported articles, records will be maintained to establish the value (or the lack of value), quantity, and disposition of any waste that results from manufacturing the exported articles. If no waste results, records to establish that fact will be maintained.

G. Loss or Gain

The manufacturer or producer will maintain records showing the extent of any loss or gain in net weight or measurement of the steel caused by atmospheric conditions, chemical reactions, or other factors.

H. [Reserved]

I. Procedures and Records Maintained

Records, which may include records kept in the normal course of business, will be maintained to establish:

1. The identity and 8-digit HTSUS classification of the designated merchandise;

2. The quantity of merchandise of the designated merchandise3 used to produce the exported articles;

3If claims are to be made on an “appearing in” basis, the remainder of this sentence should read “appearing in the exported articles produced.”

3. That, within 5 years of the date of importation of the designated merchandise, the manufacturer or producer used the merchandise to produce articles. During the same 5-year period, the manufacturer or producer produced4 the exported articles.

4The date of production is the date an article is completed.

J. Inventory Procedures

The inventory records of the manufacturer or producer must show how the drawback recordkeeping requirements set forth in 19 U.S.C. 1313(b) and part 190 of the CBP Regulations will be met, as discussed under the heading “Procedures and Records Maintained.” If those records do not establish satisfaction of all legal requirements, drawback cannot be paid.

K. Basis of Claim for Drawback

Drawback will be claimed on the quantity of steel used in producing the exported articles only if there is no waste or valueless or unrecovered waste in the manufacturing operation. Drawback may be claimed on the quantity of eligible steel that appears in the exported articles, regardless of whether there is waste, and no records of waste need be maintained. If there is valuable waste recovered from the manufacturing operation and records are kept which show the quantity and value of the waste from each lot of steel, drawback may be claimed on the quantity of eligible steel used to produce the exported articles less the amount of that steel which the value of the waste would replace.

L. General Requirements

The manufacturer or producer will:

1. Comply fully with the terms of this general ruling when claiming drawback;

2. Open its factory and records for examination at all reasonable hours by authorized Government officers;

3. Keep its drawback related records and supporting data for at least 3 years from the date of liquidation of any drawback claim predicated in whole or in part upon this general ruling;

4. Keep its letter of notification to operate under this general ruling current by reporting promptly to the drawback office which liquidates its claims any changes in the information required by the General Instructions of this Appendix (I. General Instructions, 1 through 10), the corporate name, or corporate organization by succession or reincorporation;

6. Issue instructions to insure proper compliance with title 19, United States Code, section 1313, part 190 of the CBP Regulations and this general ruling.

XIII. General Manufacturing Drawback Ruling Under 19 U.S.C. 1313(b) for Sugar (T.D. 81-92)

A. Same 8-Digit HTSUS Classification (Parallel Columns)

Open Table


Imported merchandise or drawback products¹ to be designated as the basis for drawback on the exported products.	Duty-paid, duty-free or domestic merchandise classifiable under the same 8-digit HTSUS subheading number as that designated which will be used in the production of the exported products.
1. Granulated or liquid sugar for manufacturing, containing sugar solids of not less than 99.5 sugar degrees.	1. Granulated or liquid sugar for manufacturing, containing sugar solids of less than 99.5 sugar degrees.
2. Granulated or liquid sugar for manufacturing, containing sugar solids of not less than 99.5 sugar degrees.	2. Granulated or liquid sugar for manufacturing, containing sugar solids of less than 99.5 sugar degrees.

The sugars listed above test within three-tenths of a degree on the polariscope. Sugars in each column are completely interchangeable with the sugars directly opposite and designation will be made on this basis only. The designated sugar on which claims for drawback will be based will be classifiable under the same 8-digit HTSUS classification.

B. Exported Articles on Which Drawback Will Be Claimed

Edible substances (including confectionery) and/or beverages and/or ingredients therefor.

C. General Statement

D. Process of Manufacture or Production

The sugars are subjected to one or more of the following operations to form the desired product(s):

1. Mixing with other substances,

2. Cooking with other substances,

3. Boiling with other substances,

4. Baking with other substances,

5. Additional similar processes.

E. Multiple Products

Not applicable.

F. Waste

No drawback is payable on any waste which results from the manufacturing operation. Unless the claim for drawback is based on the quantity of sugar appearing in the exported articles, records will be maintained to establish the value (or the lack of value), quantity, disposition of any waste that results from manufacturing the exported articles. If no waste results, records to establish that fact will be maintained.

G. Loss or Gain

The manufacturer or producer will maintain records showing the extent of any loss or gain in net weight or measurement of the sugar caused by atmospheric conditions, chemical reactions, or other factors.

H. [Reserved]

I. Procedures and Records Maintained

Records, which may include records kept in the normal course of business, will be maintained to establish:

1. The identity and 8-digit HTSUS classification of the designated merchandise;

2. The quantity of merchandise classifiable under the same 8-digit HTSUS classification as the designated merchandise2 used to produce the exported articles;

2If claims are to be made on an “appearing in” basis, the remainder of this sentence should read “appearing in the exported articles produced.”

3The date of production is the date an article is completed.

J. Inventory Procedures

The inventory records of the manufacturer or producer, will show how the drawback recordkeeping requirements set forth in 19 U.S.C. 1313(b) and part 190 of the CBP Regulations will be met, as discussed under the heading “Procedures and Records Maintained.” If those records do not establish satisfaction of all legal requirements, drawback cannot be paid.

K. Basis of Claim for Drawback

Drawback will be claimed on the quantity of sugar used in producing the exported articles only if there is no waste or valueless or unrecovered waste in the manufacturing operation. Drawback may be claimed on the quantity of eligible sugar that appears in the exported articles regardless of whether there is waste, and no records of waste need be maintained. If there is valuable waste recovered from the manufacturing operation and records are kept which show the quantity and value of the waste, drawback may be claimed on the quantity of eligible material used to produce the exported articles less the amount of that sugar which the value of the waste would replace.

L. General Requirements

The manufacturer or producer will:

1. Comply fully with the terms of this general ruling when claiming drawback;

2. Open its factory and records for examination at all reasonable hours by authorized Government officers;

3. Keep its drawback related records and supporting data for at least 3 years from the date of liquidation of any drawback claim predicated in whole or in part upon this general ruling;

6. Issue instructions to insure proper compliance with title 19, United States Code, section 1313, part 190 of the CBP Regulations and this general ruling.

XIV. General Manufacturing Drawback Ruling Under 19 U.S.C. 1313(a) for Woven Piece Goods (T.D. 83-84)

Drawback may be allowed under 19 U.S.C. 1313(a) upon the exportation of bleached, mercerized, printed, dyed, or redyed piece goods manufactured or produced by any one or a combination of the foregoing processes with the use of imported woven piece goods, subject to the following special requirements:

A. Imported Merchandise or Drawback Products1 Used

1Drawback products are those produced in the United States in accordance with the drawback law and regulations.

Imported merchandise or drawback products (woven piece goods) are used in the manufacture of the exported articles upon which drawback claims will be based.

B. Exported Articles on Which Drawback Will Be Claimed

Exported articles on which drawback will be claimed must be manufactured in the United States using imported merchandise or drawback products.

C. General Statement

D. Process of Manufacture or Production

The imported merchandise or drawback products will be used to manufacture or produce articles in accordance with §190.2.

The piece goods used in manufacture or production under this general manufacturing drawback ruling may also be subjected to one or more finishing processes. Drawback will not be allowed under this general manufacturing drawback ruling when the process performed results only in the restoration of the merchandise to its condition at the time of importation.

E. Multiple Products

Not applicable.

F. Waste

Rag waste may be incurred. No drawback is payable on any waste which results from the manufacturing operation. Unless the claim for drawback is based on the quantity of merchandise appearing in the exported articles, the records of the manufacturer or producer must show the quantity of rag waste, if any, its value, and its disposition. If no waste results, records will be maintained to establish that fact. In instances where rag waste occurs and it is impractical to account for the actual quantity of rag waste incurred, it may be assumed that such rag waste constituted 2% of the woven piece goods put into process. If necessary to establish the quantity of merchandise (eligible piece goods) appearing in the exported articles, such waste records will also be kept.

G. Shrinkage, Gain, and Spoilage

Unless the claim for drawback is based on the quantity of merchandise appearing in the exported articles, the records of the manufacturer or producer must show the yardage lost by shrinkage or gained by stretching during manufacture, and the quantity of remnants resulting and of spoilage incurred, if any. If necessary to establish the quantity of merchandise (eligible piece goods) appearing in the exported articles, such records for shrinkage, gain, and spoilage will also be kept.

H. Procedures and Records Maintained

Records, which may include records kept in the normal course of business, will be maintained to establish:

1. That the exported articles on which drawback is claimed were produced with the use of the imported merchandise; and

2. The quantity of imported merchandise2 used in producing the exported articles.

2If claims are to be made on an “appearing in” basis, the remainder of the sentence should read “appearing in the exported articles.”

I. Inventory Procedures

The records of the manufacturer or producer must show, as to each lot of piece goods manufactured or produced for exportation with benefit of drawback, the lot number and the date or inclusive dates of manufacture or production, the quantity, identity, value, and 8-digit HTSUS classification of the imported (or drawback product) piece goods used, the condition in which imported or received (whether in the gray, bleached, dyed, or mercerized), the working allowance specified in the contract under which they are received, the process or processes applied thereto, and the quantity and description of the piece goods obtained. The records must also show the yardage lost by shrinkage or gained by stretching during manufacture or production, and the quantity of remnants resulting and of spoilage incurred.

J. Basis of Claim for Drawback

Drawback will be claimed on the quantity of merchandise used in producing the exported articles only if there is no waste or valueless or unrecovered waste in the manufacturing operation. Drawback may be claimed on the quantity of eligible merchandise that appears in the exported articles, regardless of whether there is waste, and no records of waste need be maintained. If there is valuable waste recovered from the manufacturing operation and records are kept which show the quantity and value of the waste, drawback may be claimed on the quantity of eligible material used to produce the exported articles, less the amount of that merchandise which the value of the waste would replace. (If remnants and/or spoilage occur during manufacture or production, the quantity of imported merchandise used will be determined by deducting from the quantity of piece goods received and put into manufacture or production the quantity of such remnants and/or spoilage. The remaining quantity will be reduced by the quantity thereof which the value of the rag waste, if any, would replace.)

K. General Requirements

The manufacturer or producer will:

1. Comply fully with the terms of this general ruling when claiming drawback;

2. Open its factory and records for examination at all reasonable hours by authorized Government officers;

3. Keep its drawback related records and supporting data for at least 3 years from the date of liquidation of any drawback claim predicated in whole or in part upon this general ruling;

6. Issue instructions to insure proper compliance with 19 U.S.C. 1313, part 190 of the CBP Regulations and this general ruling.

Tried the LawStack mobile app?

Join thousands and try LawStack mobile for FREE today.

Carry the law offline, wherever you go.
Download CFR, USC, rules, and state law to your mobile device.

Table of Contents

I. General Instructions

II. General Manufacturing Drawback Ruling Under 19 U.S.C. 1313(a) (T.D. 81-234; T.D. 83-123)

A. Imported Merchandise or Drawback Products1 Used

B. Exported Articles on Which Drawback Will Be Claimed

C. General Statement

D. Process of Manufacture or Production

E. Multiple Products

1. Relative Values

2. Appearing-In Method

F. Loss or Gain

G. [Reserved]

H. Stock in Process

I. Waste

J. Procedures and Records Maintained

K. Inventory Procedures

L. Basis of Claim for Drawback

M. General Requirements

III. General Manufacturing Drawback Ruling Under 19 U.S.C. 1313(a) or 1313(b) for Agents (T.D. 81-181)

A. Name and Address of Principal

B. Process of Manufacture or Production

C. Procedures and Records Maintained

D. General Requirements

IV. General Manufacturing Drawback Ruling Under 19 U.S.C. 1313(a) for Burlap or Other Textile Material (T.D. 83-53)

A. Imported Merchandise or Drawback Products1 Used

B. Exported Articles on Which Drawback Will Be Claimed

C. General Statement

D. Process of Manufacture or Production

E. Multiple Products

F. Loss or Gain

G. Waste

H. Procedures and Records Maintained

I. Inventory Procedures

J. Basis of Claim for Drawback

K. General Requirements

V. General Manufacturing Drawback Ruling Under 19 U.S.C. 1313(b) for Component Parts (T.D. 81-300)

A. Same 8-Digit HTSUS Classification (Parallel Columns)

B. Exported Articles on Which Drawback Will Be Claimed

C. General Statement

D. Process of Manufacture or Production

E. Multiple Products

F. Waste

G. [Reserved]

H. Procedures and Records Maintained

I. Inventory Procedures

J. Basis of Claim for Drawback

K. General Requirements

VI. General Manufacturing Drawback Ruling Under 19 U.S.C. 1313(a) for Flaxseed (T.D. 83-80)

A. Imported Merchandise or Drawback Products1 Used

B. Exported Articles on Which Drawback Will Be Claimed

C. General Statement

D. Process of Manufacture or Production

E. Multiple Products

F. Loss or Gain

G. Waste

H. Procedures and Records Maintained

I. Inventory Procedures

J. Basis of Claim for Drawback

K. General Requirements

VII. General Manufacturing Drawback Ruling Under 19 U.S.C. 1313(a) for Fur Skins or Fur Skin Articles (T.D. 83-77)

A. Imported Merchandise or Drawback Products1 Used

B. Exported Articles on Which Drawback Will Be Claimed

C. General Statement

D. Process of Manufacture or Production

E. Multiple Products

F. Loss or Gain

G. Waste

H. Procedures and Records Maintained

I. Inventory Procedures

J. Basis of Claim for Drawback

K. General Requirements

VIII. General Manufacturing Drawback Ruling Under 19 U.S.C. 1313(b) for Orange Juice (T.D. 85-110)

A. Same 8-Digit HTSUS Classification (Parallel Columns)

B. Exported Articles on Which Drawback Will Be Claimed

C. General Statement

D. Process of Manufacture or Production

E. Multiple Products, Waste, Loss or Gain

F. [Reserved]

G. Procedures and Records Maintained

H. Inventory Procedures