21 CFR § 178.3010
Adjuvant substances used in the manufacture of foamed plastics
June 25, 2020
The following substances may be safely used as adjuvants in the manufacture of foamed plastics intended for use in contact with food, subject to any prescribed limitations:
Open Table
| List of substances | Limitations |
|---|---|
| Azodicarbonamide | For use as a blowing agent in polyethylene complying with item 2.1 in §177.1520(c) of this chapter at a level not to exceed 5 percent by weight of finished foamed polyethylene. |
| 1,1-Difluoroethane (CAS Reg. No. 75-37-6) | For use as a blowing agent in polystyrene. |
| Isopentane | For use as a blowing agent in polystyrene. |
| n-Pentane | Do. |
| 1,1,2,2-Tetra-chloroethylene | For use only as a blowing agent adjuvant in polystyrene at a level not to exceed 0.3 percent by weight of finished foamed polystyrene intended for use in contact with food only of the types identified in §176.170(c) of this chapter, table 1, under Categories I, II, VI, and VIII. |
| Toluene | For use only as a blowing agent adjuvant in polystyrene at a level not to exceed 0.35 percent by weight of finished foamed polystyrene. |
[47 FR 22090, May 21, 1982, as amended at 58 FR 64895, Dec. 10, 1993]
Tried the LawStack mobile app?
Join thousands and try LawStack mobile for FREE today.
- Carry the law offline, wherever you go.
- Download CFR, USC, rules, and state law to your mobile device.
