(a) Deadline for notifications.

(1) The manufacturer must complete the notifications carried out under a plan approved by an SAA or the Secretary under §3282.408 on or before the deadline approved by the SAA or Secretary. In approving each deadline, an SAA or the Secretary will allow a reasonable time to complete all notifications, taking into account the number of manufactured homes involved and the difficulty of completing the notifications.

(2) The manufacturer must, at the time of dispatch, furnish to the SAA or the Secretary a true or representative copy of each notice, bulletin, and other written communication sent to retailers, distributors, or owners of manufactured homes regarding any serious defect or imminent safety hazard that may exist in any homes produced by the manufacturer, or regarding any noncompliance or defect for which the SAA or Secretary requires, under §3282.413(c), the manufacturer to submit a plan for providing notification.

(b) Deadline for corrections. A manufacturer that is required to correct a serious defect or imminent safety hazard pursuant to §3282.406(b) must complete implementation of the plan required by §3282.408 on or before the deadline approved by the SAA or the Secretary. The deadline must be no later than 60 days after approval of the plan. In approving the deadline, the SAA or the Secretary will allow a reasonable amount of time to complete the plan, taking into account the seriousness of the problem, the number of manufactured homes involved, the immediacy of any risk, and the difficulty of completing the action. The seriousness and immediacy of any risk posed by the serious defect or imminent safety hazard will be given greater weight than other considerations.

(c) Extensions. An SAA that approved a plan or the Secretary may grant an extension of the deadlines included in a plan, if the manufacturer requests such an extension in writing and shows good cause for the extension, if the SAA or the Secretary decides that the extension is justified and not contrary to the public interest. When the Secretary grants an extension for completion of any corrections, the Secretary will notify the manufacturer and must publish notice of such extension in the Federal Register. When an SAA grants an extension for completion of any corrections, the SAA must notify the Secretary and the manufacturer.

(d) Recordkeeping. The manufacturer must provide the report and maintain the records that are required by §3282.417 for all notification and correction actions.