§ 1918.98 Qualifications of machinery operators and supervisory training.

(a) Qualification of machinery operators.

(1) Only an employee determined by the employer to be competent by reason of training or experience, and who understands the signs, notices and operating instructions and is familiar with the signal code in use, shall be permitted to operate a crane, winch, or other power-operated cargo handling apparatus, or any power-operated vehicle, or give signals to the operator of any hoisting apparatus. However, an employee being trained and supervised by a designated person may operate such machinery and give signals to operators during training.

(2) No employee known to have defective uncorrected eyesight or hearing, or to be suffering from heart disease, epilepsy, or similar ailments that may suddenly incapacitate the employee, shall be permitted to operate a crane, winch or other power-operated cargo handling apparatus or a power-operated vehicle.

(b) Supervisory accident prevention proficiency.

(1) By July 16, 1999, each immediate supervisor of a cargo handling operation of more than five persons shall satisfactorily complete a course in accident prevention.

(2) Each employee newly assigned to supervisory duties after that date shall be required to meet the provisions of this paragraph within 90 days of such assignment.

(3) The accident prevention course shall consist of instruction suited to the particular operations involved.^[13]

[62 FR 40202, July 25, 1997, as amended at 65 FR 40946, June 30, 2000]