Except as provided in 40 CFR 403.7 and 403.13, any existing source subject to this subpart that introduces pollutants into a publicly owned treatment works must comply with 40 CFR part 403 and must achieve the following pretreatment standards for existing sources (PSES):

(a) Sintering operations with wet air pollution control system. The following table presents PSES for sintering operations with wet air pollution control systems:

Subpart B—Pretreatment Standards for Existing Sources (PSES)

Open Table
Regulated parameter Maximum daily1 Maximum monthly avg.1
Ammonia-N2 3 0.0150 0.00501
Cyanide2 0.00300 0.00150
Phenols (4AAP)2 0.000100 0.0000501
Lead 0.000451 0.000150
Zinc 0.000676 0.000225
2,3,7,8-TCDF <ML

1Pounds per thousand lb of product.

2The pretreatment standards for these parameters apply only when sintering wastewater is co-treated with ironmaking wastewater.

3The pretreatment standards for ammonia are not applicable to sources that discharge to a POTW with nitrification capability (defined at §420.02(s)).

(b) Sintering operations with dry air pollution control system. There shall be no discharge of process wastewater pollutants to POTWs.

[67 FR 64265, Oct. 17, 2002]


Tried the LawStack mobile app?

Join thousands and try LawStack mobile for FREE today.

  • Carry the law offline, wherever you go.
  • Download CFR, USC, rules, and state law to your mobile device.