40 CFR § 426.115
Standards of performance for new sources
June 9, 2020
The following standards of performance establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a new source subject to the provisions of this subpart (the fluoride and lead limitations are applicable to the abrasive polishing and acid polishing waste water streams while the TSS, oil, and pH limitations are applicable to the entire process waste water stream):
Open Table
| Effluent characteristic | Effluent limitations | |
|---|---|---|
| Maximum for any 1 day | Average of daily values for 30 consecutive days shall not exceed— | |
| Metric units (g/kkg of furnace pull) | ||
| Oil | 260.0 | 130.0 |
| TSS | 260.0 | 130.0 |
| Fluoride | 120.0 | 60.0 |
| Lead | 30.9 | 0.45 |
| pH | (1) | (1) |
| English units (lb/1,000 lb of furnace pull) | ||
| Oil | 0.26 | 0.13 |
| TSS | 0.26 | 0.13 |
| Fluoride | 0.12 | 0.06 |
| Lead | 0.0009 | 0.00045 |
| pH | (1) | (1) |
1Within the range 6.0 to 9.0.
Tried the LawStack mobile app?
Join thousands and try LawStack mobile for FREE today.
- Carry the law offline, wherever you go.
- Download CFR, USC, rules, and state law to your mobile device.
