40 CFR § 426.136
Pretreatment standards for new sources
June 9, 2020
Any new source subject to this subpart that introduces process wastewater pollutants into a publicly owned treatment works must comply with 40 CFR part 403. In addition, the following pretreatment standard establishes the quantity or quality of pollutants or pollutant properties controlled by this section which may be discharged to a publicly owned treatment works by a new point source subject to the provisions of this subpart.
Open Table
| Pollutant or pollutant property | Pretreatment standards (mg/l) | |
|---|---|---|
| Maximum for any 1 day | Average of daily values for 30 consecutive days shall not exceed— | |
| (a): | ||
| Fluoride | 26.0 | 13.0 |
| Lead | (1) | (1) |
| TSS | (1) | (1) |
| pH | (1) | (1) |
| (b): | ||
| Fluoride | 26.0 | 13.0 |
| Lead | (1) | (1) |
| TSS | (1) | (1) |
| pH | (1) | (1) |
| (c): | ||
| TSS | (1) | (1) |
| pH | (1) | (1) |
1No limitation.
[40 FR 2960, Jan. 16, 1975, as amended at 60 FR 33960, June 29, 1995]
Tried the LawStack mobile app?
Join thousands and try LawStack mobile for FREE today.
- Carry the law offline, wherever you go.
- Download CFR, USC, rules, and state law to your mobile device.
