40 CFR § 463.14
New source performance standards
June 9, 2020
(a) NSPS for bis(2-ethylhexyl) phthalate are reserved.
(b) Any new source subject to this subpart must achieve performance standards (i.e., mass of pollutant discharged), which are calculated by multiplying the average process water usage flow rate for the contact cooling and heating water processes at a new source times the following pollutant concentrations:
Subpart A
[Contact cooling and heating water]
Open Table
| Concentration used to calculate NSPS | |
|---|---|
| Pollutant or pollutant property | Maximum for any 1 day (mg/l) |
| BOD5 | 26 |
| Oil and grease | 29 |
| TSS | 19 |
| pH | (1) |
1Within the range of 6.0 to 9.0 at all times.
The permit authority will obtain the average process water usage flow rate for the new source contact cooling and heating water processes from the permittee.
Tried the LawStack mobile app?
Join thousands and try LawStack mobile for FREE today.
- Carry the law offline, wherever you go.
- Download CFR, USC, rules, and state law to your mobile device.
