Except as provided in 40 CFR 125.30 through 125.32, any existing point source subject to this subpart must achieve the following effluent limitations for the process operations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available (BPT):
(a) Rolling spent emulsions.
Subpart A—BPT
Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average |
---|---|---|
mg/off-kg (pounds per million off-pounds) of lead-tin-bismuth rolled with emulsions | ||
Antimony | 0.068 | 0.030 |
Lead | 0.010 | 0.005 |
Oil and grease | 0.468 | 0.281 |
TSS | 0.960 | 0.457 |
pH | (1) |
1Within the range of 7.5 to 10.0 at all times.
(b) Rolling spent soap solutions.
Subpart A—BPT
Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average |
---|---|---|
mg/off-kg (pounds per million off-pound) of lead-tin-bismuth rolled with soap solutions | ||
Antimony | 0.125 | 0.055 |
Lead | 0.019 | 0.009 |
Oil and grease | 0.860 | 0.520 |
TSS | 1.80 | 0.840 |
pH | (1) |
1Within the range of 7.5 to 10.0 at all times.
(c) Drawing spent neat oils—subpart A—BPT. There shall be no discharge of process wastewater pollutants.
(d) Drawing spent emulsions.
Subpart A—BPT
Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average |
---|---|---|
mg/off-kg (pounds per million off-pounds) of lead-tin-bismuth drawn with emulsions | ||
Antimony | 0.076 | 0.034 |
Lead | 0.011 | 0.005 |
Oil and grease | 0.526 | 0.316 |
TSS | 1.08 | 0.513 |
pH | (1) |
1Within the range of 7.5 to 10.0 at all times.
(e) Drawing spent soap solutions.
Subpart A—BPT
Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average |
---|---|---|
mg/off-kg (pounds per million off-pounds) of lead-tin-bismuth drawn with soap solutions | ||
Antimony | 0.022 | 0.010 |
Lead | 0.003 | 0.002 |
Oil and grease | 0.149 | 0.090 |
TSS | 0.306 | 0.146 |
pH | (1) |
1Within the range of 7.5 to 10.0 at all times.
(f) Extrusion press and solution heat treatment contact cooling water.
Subpart A—BPT
Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average |
---|---|---|
mg/off-kg (pounds per million off-pounds of lead-tin-bismuth heat treated | ||
Antimony | 4.14 | 1.850 |
Lead | 0.605 | 0.288 |
Oil and grease | 28.80 | 17.30 |
TSS | 59.10 | 28.10 |
pH | (1) |
1Within the range of 7.5 to 10.0 at all times.
(g) Extrusion press hydraulic fluid leakage.
Subpart A—BPT
Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average |
---|---|---|
mg/off-kg (pounds per million off-pounds) of lead-tin-bismuth extruded | ||
Antimony | 0.158 | 0.071 |
Lead | 0.023 | 0.011 |
Oil and grease | 1.10 | 0.660 |
TSS | 2.26 | 1.07 |
pH | (1) |
1Within the range of 7.5 to 10.0 at all times.
(h) Continuous strip casting contact cooling water.
Subpart A—BPT
Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average |
---|---|---|
mg/off-kg (pounds per million off-pounds) of lead-tin-bismuth cast by the continuous strip method | ||
Antimony | 0.003 | 0.001 |
Lead | 0.0004 | 0.0002 |
Oil and grease | 0.020 | 0.012 |
TSS | 0.041 | 0.020 |
pH | (1) |
1Within the range of 7.5 to 10.0 at all times.
(i) Semi-continuous ingot casting contact cooling water.
Subpart A—BPT
Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average |
---|---|---|
mg/off-kg (pounds per million off-pounds) of lead-tin-bismuth ingot cast by the sem-continuous method | ||
Antimony | 0.085 | 0.038 |
Lead | 0.013 | 0.006 |
Oil and grease | 0.588 | 0.353 |
TSS | 1.21 | 0.574 |
pH | (1) |
1Within the range of 7.5 to 10.0 at all times.
(j) Shot casting contact cooling water.
Subpart A—BPT
Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average |
---|---|---|
mg/off-kg (pounds per million off-pounds) of lead-tin-bismuth shot cast | ||
Antimony | 0.107 | 0.048 |
Lead | 0.016 | 0.008 |
Oil and grease | 0.746 | 0.448 |
TSS | 1.53 | 0.728 |
pH | (1) |
1Within the range of 7.5 to 10.0 at all times.
(k) Shot-forming wet air pollution control scrubber blowdown.
Subpart A—BPT
Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average |
---|---|---|
mg/off-kg (pounds per million off-pounds) of lead-tin-bismuth shot formed | ||
Antimony | 1.69 | 0.753 |
Lead | 0.247 | 0.118 |
Oil and grease | 11.8 | 7.06 |
TSS | 24.1 | 11.5 |
pH | (1) |
1Within the range of 7.5 to 10.0 at all times.
(l) Alkaline cleaning spent baths.
Subpart A—BPT
Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average |
---|---|---|
mg/off-kg (pounds per million off-pounds) of lead-tin-bismuth alkaline cleaned | ||
Antimony | 0.345 | 0.154 |
Lead | 0.051 | 0.024 |
Oil and grease | 2.40 | 1.44 |
TSS | 4.92 | 2.34 |
pH | (1) |
1Within the range of 7.5 to 10.0 at all times.
(m) Alkaline cleaning rinse.
Subpart A—BPT
Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average |
---|---|---|
mg/off-kg (pounds per million off-pounds) of lead-tin-bismuth alkaline cleaned | ||
Antimony | 6.78 | 3.02 |
Lead | 0.991 | 0.472 |
Oil and grease | 47.2 | 28.4 |
TSS | 96.8 | 46.0 |
pH | (1) |
1Within the range of 7.5 to 10.0 at all times.
(n) Swaging spent emulsions.
Subpart A—BPT
Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average |
---|---|---|
mg/off-kg (pounds per million off-pounds) of lead-tin-bismuth swaged with emulsion | ||
Antimony | 0.005 | 0.002 |
Lead | 0.0007 | 0.0004 |
Oil and grease | 0.036 | 0.022 |
TSS | 0.073 | 0.034 |
pH | (1) |
1Within the range of 7.5 to 10.0 at all times.
(o) Degreasing spent solvents—subpart A—BPT. There shall be no discharge of process wastewater pollutants.
[50 FR 34270, Aug. 23, 1985; 51 FR 2884, Jan. 22, 1986]