Except as provided in 40 CFR 125.30 through 125.32, any existing point source subject to this subpart must achieve the following effluent limitations for the process operations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available (BPT):
(a) Rolling spent emulsions.
Subpart B—BPT
Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average |
---|---|---|
mg/off-kg (pounds per million off-pounds) of magnesium rolled with emulsions | ||
Chromiun | 0.033 | 0.014 |
Zinc | 0.109 | 0.046 |
Ammonia | 9.95 | 4.37 |
Fluoride | 4.440 | 1.97 |
Oil and grease | 1.49 | 0.895 |
TSS | 3.06 | 1.46 |
pH | (1) |
1Within the range of 7.5 to 10.0 at all times.
(b) Forging spent lubricants—subpart B—BPT. There shall be no discharge of process wastewater pollutants.
(c) Forging contact cooling water.
Subpart B—BPT
Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average |
---|---|---|
mg/off-kg (pounds per million off-pounds) of forged magnesium cooled with water | ||
Chromium | 1.27 | 0.520 |
Zinc | 4.22 | 1.77 |
Ammonia | 385 | 170 |
Fluoride | 172 | 76.3 |
Oil and grease | 57.8 | 34.7 |
TSS | 119 | 56.4 |
pH | (1) |
1Within the range of 7.5 to 10.0 at all times.
(d) Forging equipment cleaning wastewater.
Subpart B—BPT
Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average |
---|---|---|
mg/off-kg (pounds per million off-pounds) of magnesium forged | ||
Chromium | 0.018 | 0.007 |
Zinc | 0.059 | 0.025 |
Ammonia | 5.32 | 2.34 |
Fluoride | 2.38 | 1.06 |
Oil and grease | 0.798 | 0.479 |
TSS | 1.64 | 0.778 |
pH | (1) |
1Within the range of 7.5 to 10.0 at all times.
(e) Direct chill casting contact cooling water.
Subpart B—BPT
Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average |
---|---|---|
mg/off-kg (pounds per million off-pounds) of magnesium cast with direct chill methods | ||
Chromium | 1.74 | 0.711 |
Zinc | 5.77 | 2.41 |
Ammonia | 527 | 232 |
Fluoride | 235 | 105 |
Oil and grease | 79.0 | 47.4 |
TSS | 162 | 77.1 |
pH | (1) |
1Within the range of 7.5 to 10.0 at all times.
(f) Surface treatment spent baths.
Subpart B—BPT
Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average |
---|---|---|
mg/off-kg (pounds per million off-pounds) of magnesium surface treated | ||
Chromium | 0.205 | 0.084 |
Zinc | 0.681 | 0.285 |
Ammonia | 62.1 | 27.3 |
Fluoride | 27.8 | 12.3 |
Oil and grease | 9.32 | 5.59 |
TSS | 19.1 | 9.09 |
pH | (1) |
1Within the range of 7.5 to 10.0 at all times.
(g) Surface treatment rinse.
Subpart B—BPT
Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average |
---|---|---|
mg/off-kg (pounds per million off-pounds) of magnesium surface treated | ||
Chromium | 8.32 | 3.4 |
Zinc | 27.6 | 11.5 |
Ammonia | 2520 | 1110 |
Fluoride | 1130 | 499 |
Oil and grease | 378 | 227 |
TSS | 775 | 369 |
pH | (1) |
1Within the range of 7.5 to 10.0 at all times.
(h) Sawing or grinding spent emulsions.
Subpart B—BPT
Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average |
---|---|---|
mg/off-kg (pounds per million off-pounds) of magnesium sawed or ground | ||
Chromium | 0.009 | 0.004 |
Zinc | 0.029 | 0.012 |
Ammonia | 2.60 | 1.15 |
Fluoride | 1.16 | 0.515 |
Oil and grease | 0.390 | 0.234 |
TSS | 0.800 | 0.381 |
pH | (1) |
1Within the range of 7.5 to 10.0 at all times.
(i) Degreasing spent solvents—subpart B—BPT. There shall be no discharge of process wastewater pollutants.
(j) Wet air pollution control scrubber blowdown.
Subpart B—BPT
Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average |
---|---|---|
mg/off-kg (pounds per million off-pounds) of magnesium sanded and repaired or forged | ||
Chromium | 0.273 | 0.112 |
Zinc | 0.904 | 0.378 |
Ammonia | 82.5 | 36.3 |
Fluoride | 36.9 | 16.4 |
Oil and grease | 12.4 | 7.43 |
TSS | 25.4 | 12.1 |
pH | (1) |
1Within the range of 7.5 to 10.0 at all times.