(a) The following air pollution control districts submitted negative declarations for volatile organic compound source categories to satisfy the requirements of section 182 of the Clean Air Act, as amended. The following negative declarations are approved as additional information to the State Implementation Plan.

(1) Mojave Desert Air Quality Management District.

(i) Natural Gas and Gasoline Processing Equipment and Chemical Processing and Manufacturing were submitted on July 13, 1994 and adopted on May 25, 1994.

(ii) Asphalt Air Blowing was submitted on December 20, 1994 and adopted on October 26, 1994.

(iii) Vacuum Producing Devices or Systems was submitted on December 29, 1994 and adopted on December 21, 1994.

(iv) Synthetic Organic Chemical Manufacturing Industry (SOCMI) Distillation, SOCMI Reactors, SOCMI Batch Processing, Offset Lithography, Industrial Wastewater, Plastic Parts Coating (Business Machines), Plastic Parts (Other), and Ship Building were submitted on August 7, 1995 and adopted on June 28, 1995.

(v) Pneumatic Rubber Tire Manufacturing, Large Petroleum Dry Cleaners, Surface Coating of Cans, Surface Coating of Coils, Surface Coating Fabrics, Surface Coating Operations at Automotive and Light Duty Truck Assembly Plants, Surface of Coating of Large Appliances, Surface of Coating of Magnet Wire, Vacuum Producing Devices or Systems, Leaks From Petroleum Refinery Equipment, Process Unit Turnarounds, Equipment Leaks From Natural Gas/Gasoline Processing Plants, Synthesized Pharmaceutical Products, Air Oxidation Process—SOCMI, Polymer Manufacturing SOCMI and Polymer Manufacturing Equipment Leaks, Reactor Processes and Distillation Operations in SOCMI, and Synthetic Organic Chemical Polymer and Resin Manufacturing were submitted on July 11, 2007 and adopted January 22, 2007.

(vi) Petroleum Refinery Equipment, Manufacture of High-Density Polyethylene, Polypropylene, and Polystyrene Resins, and Fugitive Emissions from Synthetic Organic Chemical Polymer and Resin Manufacturing Equipment were submitted on October 22, 2010 and adopted on August 23, 2010.

(vii) The following negative declarations for the 2008 ozone NAAQS were adopted by the District on February 23, 2015 and submitted to EPA on September 9, 2015.

Open Table
CTG source category CTG reference document
Large Petroleum Dry Cleaners EPA 450/3-82-009, 9/82   Control of VOC Emissions from Large Petroleum Dry Cleaners.
Manufacture of High-Density Polyethylene, Polypropylene, and Polystyrene Resins EPA-450/3-83-008, 11/83   Control of Volatile Organic Compound Emissions from Manufacture of High-Density Polyethylene, Polypropylene, and Polystyrene Resins.
Manufacture of Pneumatic Rubber Tires EPA-450/2-78-030, 12/78   Control of Volatile Organic Emissions from Manufacture of Pneumatic Rubber Tires.
Surface Coating of Cans EPA-450/2-77-008, 5/77   Control of Volatile Organic Emissions from Existing Stationary Sources—Vol. II: Surface Coating of Cans, Coils, Paper, Fabrics, Automobiles, and Light-Duty Trucks.
Surface Coating of Coils EPA-450/2-77-008, 5/77   Control of Volatile Organic Emissions from Existing Stationary Sources—Vol. II: Surface Coating of Cans, Coils, Paper, Fabrics, Automobiles, and Light-Duty Trucks.
Surface Coating Operations at Automotive and Light Duty Truck Assembly Plants EPA 453/R-08-006, 09/08   Control Technique Guidelines for Automobile and Light-Duty Truck Assembly Coatings.
EPA-450/2-77-008, 5/77   Control of Volatile Organic Emissions from Existing Stationary Sources—Vol. II: Surface Coating of Cans, Coils, Paper, Fabrics, Automobiles, and Light-Duty Trucks.
Large Appliances, Surface Coatings EPA-450/2-77-034, 12/77   Control of Volatile Organic Emissions from Existing Stationary Sources—Volume V: Surface Coating of Large Appliances.
EPA 453/R-07-004, 09/07   Control Techniques Guidelines for Large Appliance Coatings.
Surface Coating of Magnet Wire EPA-450/2-77-033, 12/77   Control of Volatile Organic Emissions from Existing Stationary Sources, Volume IV: Surface Coating of Insulation of Magnet Wire.
Vacuum Producing Devices or Systems EPA-450/2-77-025, 10/77   Control of Refinery Vacuum Producing Systems, Wastewater Separators, and Process Unit Turnarounds.
Leaks from Petroleum Refinery Equipment EPA-450/2-77-025, 10/77   Control of Refinery Vacuum Producing Systems, Wastewater Separators, and Process Unit Turnarounds.
Process Unit Turnarounds EPA-450/2-77-025, 10/77   Control of Refinery Vacuum Producing Systems, Wastewater Separators, and Process Unit Turnarounds.
Equipment Leaks from Natural Gas/Gasoline Processing Plants EPA-450/3-83-007,12/83   Control of Volatile Organic Compound Equipment Leaks from Natural Gas/Gasoline Processing Plants.
Manufacture of Synthesized Pharmaceutical Products EPA-450/2-78-029, 12/78   Control of Volatile Organic Emissions from Manufacture of Synthesized Pharmaceutical Products.
Air Oxidation Processes (SOCMI) EPA-450/3-84-015, 12/84   Control of Volatile Organic Compound Emissions from Air Oxidation Process in Synthetic Organic Chemical Manufacturing Industry (SOCMI).
Reactor and Distillation Processes (SOCMI) EPA-450/4-91-031, 08/93   Control of Volatile Organic Compound Emissions from Reactor Process and Distillation Operations in SOCMI.
Equipment used in Synthetic Organic Chemical Polymers and Resin Manufacturing EPA-450/3-83-006, 03/84   Control of Volatile Organic Compound Leaks from Synthetic Organic Chemical Polymer and Resin Manufacturing Equipment.
Leaks from Petroleum Refinery Equipment EPA-450/2-78-036, 06/78   Control of Volatile Organic Compound Leaks from Petroleum Refinery Equipment.
Metal Furniture Coating EPA-450/2-77-032, 12/77   Control of Volatile Organic Emissions from Existing Stationary Sources—Volume III: Surface Coating of Metal Furniture.
EPA 453/R-07-005, 09/07   Control Techniques Guidelines for Metal Furniture Coatings.
Flat Wood Paneling EPA-450/2-78-032, 06/78   Control of Volatile Organic Emissions from Existing Stationary Sources—Volume VII: Factory Surface Coating of Flat Wood Paneling.
EPA-453/R-06-004, 09/06   Control Techniques Guidelines for Flat Wood Paneling Coatings.

(viii) The following negative declarations for the 2008 ozone standard were adopted by the District on April 23, 2018 and submitted to EPA on July 16, 2018: Miscellaneous Metal and Plastic Parts Coatings (EPA-453/R-08-003), Table 3—Plastic Parts and Products, and Table 4—Automotive/Transportation and Business Machine Plastic Parts.

(ix) The following negative declaration for the 2008 ozone standard was adopted by the District on October 22, 2018, and submitted to EPA on December 7, 2018: Miscellaneous Metal and Plastic Parts Coatings (EPA-453/R-08-003), Table 6—Motor Vehicle Materials.

(2) Sacramento Metropolitan Air Quality Management District.

(i) Plastic Parts Coating: Business Machines and Plastic Parts Coating: Other were submitted on June 6, 1996 and adopted on May 2, 1996.

(ii) Coating Operations at Aerospace Manufacturing and Rework Operations was submitted on January 12, 2012 and adopted on October 27, 2011.

(iii) Fiberglass and Boat Manufacturing Materials and Automobile and Light-Duty Truck Assembly Coatings were submitted on July 12, 2012 and adopted on March 22, 2012.

(iv) Negative declarations for Sacramento Metropolitan Air Quality Management District.

Open Table
CTG Source category Negative declaration—CTG reference document Submitted
7/11/07,
adopted
10/26/06
Updated
submitted
1/21/09,
adopted
10/23/08
Aerospace Coating EPA-453/R-97-004 and 59 FR 29216 (6/06/94)—Control of Volatile Organic Compound Emissions from Coating Operations at Aerospace Manufacturing and Rework Operations X
Automobile Coating EPA-450/2-77-008—Control of Volatile Organic Emissions from Existing Stationary Sources, Volume II: Surface Coating of Cans, Coils, Paper, Fabrics, Automobiles, and Light-Duty Trucks X
Dry Cleaning (Petroleum Solvent) EPA-450/3-82-009—Control of Volatile Organic Compound Emissions from Large Petroleum Dry Cleaners X
Graphic Arts (Rotogravure) EPA-450/2-78-033—Control of Volatile Organic Emissions from Existing Stationary Sources, Volume VIII: Graphic Arts-Rotogravure and Flexography X
Large Appliance Coating EPA-450/2-77-034—Control of Volatile Organic Emissions from Existing Stationary Sources, Volume V: Surface Coating of Large Appliances X
Large Appliance Coating EPA-453/R-07-004—Control Techniques Guidelines for Large Appliance Coatings X
Magnetic Wire Coating EPA-450/2-77-033—Control of Volatile Organic Emissions from Existing Stationary Sources, Volume IV: Surface Coating for Insulation of Magnetic Wire X
Metal Coil Coating EPA-450/2-77-008—Control of Volatile Organic Emissions from Existing Stationary Sources, Volume II: Surface Coating of Cans, Coils, Paper, Fabrics, Automobiles, and Light-Duty Trucks X
Natural Gas/Gasoline Processing EPA-450/2-83-007—Control of Volatile Organic Compound Equipment Leaks from Natural Gas/Gasoline Processing Plants X
Paper and Fabric Coating EPA-450/2-77-008—Control of Volatile Organic Emissions from Existing Stationary Sources, Volume II: Surface Coating of Cans, Coils, Paper, Fabrics, Automobiles, and Light-Duty Trucks X
Resin Manufacturing (High-Density Polyethylene, Polypropylene, and Polystyrene) EPA-450/3-83-008—Control of Volatile Organic Compound Emissions from Manufacture of High-Density Polyethylene, Polypropylene, and Polystyrene Resins X
Refineries EPA-450/2-77-025—Control of Refinery Vacuum Producing Systems, Wastewater Separators and Process Unit Turnarounds X
    EPA-450/2-78-036—Control of Volatile Organic Compound Leaks from Petroleum Refinery Equipment X
Rubber Tire Manufacturing EPA-450/2-78-030—Control of Volatile Organic Emissions from Manufacture of Pneumatic Rubber Tires X
Ship Coating 61 FR 44050—Control Techniques Guidelines for Shipbuilding and Ship Repair Operations (Surface Coating) X
Wood Coating (Flat Wood Paneling) EPA-450/2-78-032—Control of Volatile Organic Emissions from Existing Stationary Sources, Volume VII: Factory Surface Coating of Flat Wood Paneling X
Flat Wood Paneling Coatings EPA-453/R06-004—Control Techniques Guidelines for Flat Wood Paneling Coatings X
Paper, Film and Foil EPA-453/R-07-004—Control Techniques Guidelines for Paper, Film, and Foil Coatings X

(3) Santa Barbara County Air Pollution Control District.

(i) Industrial Wastewater, Plastic Parts Coating: Business Machines, Plastic Parts Coating: Other, Industrial Cleaning Solvents, Offset Lithography, and Shipbuilding Coatings were submitted on July 12, 1996 and adopted on May 16, 1996.

(ii) Synthetic Organic Chemical Manufacturing Industry (SOCMI) Batch Processing, SOCMI Reactors, and SOCMI Distillation; and Wood Furniture Manufacturing Operations were submitted on April 9, 2002 and adopted on February 21, 2002.

(4) Placer County Air Pollution Control District.

(i) Aerospace Coatings; Industrial Waste Water Treatment; Plastic Parts Coating: Business Machines; Plastic Parts Coating: Other; Shipbuilding and Repair; Synthetic Organic Chemical Manufacturing, Batch Plants; and Synthetic Organic Chemical Manufacturing, Reactors were submitted on February 25, 1998 and adopted on October 7, 1997.

(ii)

Open Table
CTG source category Negative declaration—CTG reference document
Aerospace EPA-453/R-97-004—Control of VOC Emissions from Coating Operations at Aerospace Manufacturing and Rework Operations.
Automobile and Light-duty Truck Assembly Coatings EPA-450/2-77-008—Control of Volatile Organic Emissions from Existing Stationary Sources—Volume II: Surface Coating of Cans, Coils, Paper, Fabrics, Automobiles, and Light-Duty Trucks.
    EPA 450/R-08-006—Control Techniques Guidelines for Automobile and Light-duty Truck Assembly Coatings.
Dry Cleaning (Petroleum) EPA-450/3-82-009—Control of Volatile Organic Compound Emissions from Large Petroleum Dry Cleaners.
Fiberglass Boat Manufacturing EPA 453/R-08-004—Control Techniques Guidelines for Fiberglass Boat Manufacturing Materials.
Flexible Package Printing EPA-453/R-06-003—Control Techniques Guidelines for Flexible Package Printing.
Large Appliances Surface Coatings EPA-450/2-77-034—Control of Volatile Organic Emissions from Existing Stationary Sources, Volume V: Surface Coating of Large Appliances.
    EPA 453/R-07-004—Control Techniques Guidelines for Large Appliance Coatings.
Magnetic Wire EPA-450/2-77-033—Control of Volatile Organic Emissions from Existing Stationary Sources, Volume IV: Surface Coating of Insulation of Magnetic Wire.
Metal Furniture Coatings EPA-450/2-77-032—Control of Volatile Organic Emissions from Existing Stationary Sources, Volume III: Surface Coating of Metal Furniture.
    EPA 453/R-07-005—Control Techniques Guidelines for Metal Furniture Coatings.
Natural Gas/Gasoline EPA-450/2-83-007—Control of VOC Equipment Leaks from Natural Gas/Gasoline Processing Plants.
Paper and Fabric EPA-450/2-77-008—Control of Volatile Organic Emissions from Existing Stationary Sources—Volume II: Surface Coating of Cans, Coils, Paper, Fabrics, Automobiles, and Light-Duty Trucks.
Paper, Film, and Foil Coatings EPA 453/R-07-003—Control Techniques Guidelines for Paper, Film, and Foil Coatings.
Pharmaceutical Products EPA-450/2-78-029—Control of Volatile Organic Emissions from Manufacture of Synthesized Pharmaceutical Products.
Refineries EPA-450/2-77-025—Control of Refinery Vacuum Producing Systems, Wastewater Separators, and Process Unit Turnarounds.
    EPA-450/2-78-036—Control of VOC Leaks from Petroleum Refinery Equipment.
Rubber Tires EPA-450/2-78-030—Control of Volatile Organic Emissions from Manufacture of Pneumatic Rubber Tires.
Ships/Marine Coating EPA-453/R-94-032 Alternative Control Technology Document—Surface Coating Operations at Shipbuilding and Ship Repair Facilities and Ships 61 FR 44050 Shipbuilding and Ship Repair Operations (Surface Coating).
Synthetic Organic Chemical EPA-450/3-84-015—Control of VOC Emissions from Air Oxidation Processes in Synthetic Organic Chemical Manufacturing Industry.
    EPA-450/4-91-031—Control of VOC Emissions from Reactor Processes and Distillation Operations in SOCMI.

(iii) Submitted on April 14, 2014 and adopted on February 13, 2014.

(iv) Polyester Resin was submitted on July 18, 2014 and adopted on April 10, 2014.

(5) San Diego County Air Pollution Control District.

(i) Synthetic organic chemical manufacturing (distillation), synthetic organic chemical manufacturing (reactors), wood furniture, plastic parts coatings (business machines), plastic parts coatings (other), offset lithography, industrial wastewater, autobody refinishing, and volatile organic liquid storage were submitted on February 25, 1998 and adopted on October 22, 1997.

(6) Antelope Valley Air Pollution Control District.

(i) Motor Vehicle Assembly Line Coating Operations submitted on January 12, 1999 and adopted on November 18, 1997.

(ii) Refinery Process Turnarounds submitted on February 16, 1999 and adopted on November 18, 1997.

(iii) Marine Vessel Coating Operations, Marine Tank Vessel Operations, and Thermal Enhanced Oil Recovery Wells submitted on June 23, 1998 and adopted on January 20, 1998.

(iv) Pharmaceuticals and Cosmetic Manufacturing Operations submitted on March 28, 2000 and adopted on January 18, 2000.

(v) Metal Container, Closure and Coil Coating Operations and Magnet Wire Coating Operations submitted on June 3, 2004 and adopted on February 17, 2004.

(vi) Control of Volatile Compound Emissions from Resin Manufacturing and Surfactant Manufacturing submitted on July 19, 2004 and adopted on March 16, 2004.

(vii) Large Appliances, Surface Coating; Wood Furniture Surface Coating; Gasoline Bulk Plants, Equipment Leaks from Natural Gas/Gasoline Processing Plants; Leaks from Petroleum Refinery Equipment; Air Oxidation Processes (SOCMI); Reactor and Distillation Processes (SOCMI); Tank Truck Gasoline Loading Terminals >76,000 L; Manufacture of Synthesized Pharmaceutical Products; Manufacture of Pneumatic Rubber Tires; Manufacture of High Density Polyethylene, Polypropylene and Polystyrene; Equipment Used in Synthetic Organic Chemical Polymers and Resin Manufacturing; Refinery Vacuum-Producing Systems, Wastewater Separators and Process Unit Turnarounds; and Magnetic Wire Coating Operations submitted on January 31, 2007 and adopted on September 19, 2006.

(viii) Ship Repair Operations; Storage of Petroleum Liquids in Fixed Roof Tanks; and Petroleum Liquid Storage in External Floating Roof Tanks submitted on January 7, 2011 and adopted on October 19, 2010.

(ix) Petroleum Coke Calcining Operations—Oxides of Sulfur submitted on June 20, 2011 and adopted on January 18, 2011.

(x) The following negative declarations for the 2008 ozone NAAQS were adopted by the District on July 21, 2015 and submitted to EPA on October 23, 2015.

Open Table
CTG source category CTG reference document
Bulk Gasoline Plants Control of Volatile Organic Emissions from Bulk Gasoline Plants (EPA-450/2-77-035, 12/1977).
Coils Control of Volatile Organic Emissions from Existing Stationary Sources—Volume II: Surface Coating of Cans, Coils, Paper, Fabrics, Automobiles, and Light-Duty Trucks (EPA-450/2-77-008, 05/1977).
Fiberglass Boat Manufacturing Materials Control Techniques Guidelines for Fiberglass Boat Manufacturing Materials (EPA-453/R-08-004, 09/2008).
Fixed-Roof Tanks Control Volatile Organic Emissions from Storage of Petroleum Liquids in Fixed-Roof Tanks (EPA-450/2-77-036, 12/1977).
Flat Wood Paneling Control Techniques Guidelines for Flat Wood Paneling Coatings (EPA-453/R-06-004, 09/2006).
Floating-Roof Tanks Control of Volatile Organic Emissions from Petroleum Liquid Storage in External Floating Roof Tanks (EPA-450/2-78-047, 12/1978).
Insulation of Magnet Wire Control of Volatile Organic Emissions from Existing Stationary Sources—Volume IV: Surface Coating of Insulation of Magnet Wire (EPA-450/2-77-033, 12/1977).
Large Appliance Coatings Control of Volatile Organic Emissions from Existing Stationary Sources—Volume V: Surface Coating of Large Appliances (EPA-450/2-77-034, 12/1977).
Control Techniques Guidelines for Large Appliance Coatings (EPA-453/R-07-004, 09/2007).
Large Petroleum Dry Cleaners Control of Volatile Organic Compound Emissions from Large Petroleum Dry Cleaners (EPA-450/3-82-009, 09/1982).
Manufacture of High-Density Polyethylene, Polypropylene, and Polystyrene Resins Control of Volatile Organic Compound Emissions from Manufacture of High-Density Polyethylene, Polypropylene, and Polystyrene Resins (EPA-450/3-83-008, 11/1983).
Metal Furniture Coating Control Techniques Guidelines for Metal Furniture Coatings (EPA-453/R-07-005, 09/2007).
Natural Gas/Gasoline Processing Plants Control of Volatile Organic Compound Leaks from Natural Gas/Gasoline Processing Plants (EPA-450/3-83-007, 12/1983).
Petroleum Refinery Equipment Control of Volatile Organic Compound Leaks from Petroleum Refinery Equipment (EPA-450/2-78-036, 06/1978).
Pneumatic Rubber Tires Control of Volatile Organic Emissions from Manufacture of Pneumatic Rubber Tires (EPA-450/2-78-030, 12/1978).
Refinery Vacuum Producing Systems, Wastewater Separators, and Process Unit Turnarounds Control of Refinery Vacuum Producing Systems, Wastewater Separators, and Process Unit Turnarounds (EPA-450/2-77-025, 10/1977).
Shipbuilding and Ship Repair Surface Coating Operations Control Techniques Guidelines for Shipbuilding and Ship Repair Operations (Surface Coating) (61 FR 44050, 08/27/96) and EPA-453/R-94-032, 04/1994.
Synthesized Pharmaceutical Products Control of Volatile Organic Emissions from Manufacture of Synthesized Pharmaceutical Products (EPA-450/2-78-029, 12/1978).
Synthetic Organic Chemical Manufacturing Industry Control Volatile Organic Compound Emissions from Air Oxidation Processes in Synthetic Organic Chemical Manufacturing Industry (EPA-450/3-84-015, 12/1984).
Control of Volatile Organic Compound Emissions from Reactor Processes and Distillation Operations in Synthetic Organic Chemical Manufacturing Industry (EPA-450/4-91-031, 08/1993).
Synthetic Organic Chemical Polymer and Resin Manufacturing Equipment Control of Volatile Organic Compound Leaks from Synthetic Organic Chemical Polymer and Resin Manufacturing Equipment (EPA-450/3-83-006, 03/1984).
Wood Furniture Manufacturing Coating Operations Control of Volatile Organic Compound Emissions from Wood Furniture Manufacturing Operations (EPA-453/R-96-007, 04/1996).

(xi) The following negative declarations were adopted by the District on December 20, 2016 and submitted to EPA on June 7, 2017.

Negative Declarations for the 1997 Ozone NAAQS

Open Table
CTG source category CTG reference document
Can Coating Control of Volatile Organic Emissions from Existing Stationary Sources—Volume II: Surface Coating of Cans, Coils, Paper, Fabrics, Automobiles, and Light-Duty Trucks (EPA-450/2-77-008, 05/1977).
Flat Wood Paneling Coating Control of Volatile Organic Emissions from Existing Stationary Sources—Volume VII: Factory Surface Coating of Flat Wood Paneling (EPA-450/2-78-032, 06/1978).
Large Petroleum Dry Cleaning Control of Volatile Organic Compound Emissions from Large Petroleum Dry Cleaners (EPA-450/3-82-009, 09/1982).

Negative Declarations for the 2008 Ozone NAAQS

Open Table
CTG source category CTG reference document
Can Coating Control of Volatile Organic Emissions from Existing Stationary Sources—Volume II: Surface Coating of Cans, Coils, Paper, Fabrics, Automobiles, and Light-Duty Trucks (EPA-450/2-77-008, 05/1977).
Drum Coating Control Techniques Guidelines for Miscellaneous Metal and Plastic Parts Coatings (EPA-453/R-08-003, 09/2008).
Flat Wood Paneling Coating Control of Volatile Organic Emissions from Existing Stationary Sources—Volume VII: Factory Surface Coating of Flat Wood Paneling (EPA-450/2-78-032, 06/1978).
Metal Furniture Coating Control of Volatile Organic Emissions from Existing Stationary Sources—Volume III: Surface Coating of Metal Furniture (EPA-450/2-77-032, 12/1977).
Pleasure Craft Coating Control Techniques Guidelines for Miscellaneous Metal and Plastic Parts Coatings (EPA-453/R-08-003, 09/2008).
Tank Truck Gasoline Loading Terminals Control of Hydrocarbons from Tank Truck Gasoline Loading Terminals (EPA-450/2-77-026, 10/1977).

(7) El Dorado County Air Pollution Control District.

(i) Bulk Terminal Facilities or External or Internal Floating Roof Tank Sources was submitted on May 23, 2001 and adopted on April 3, 2001.

(ii) Control of VOC Emissions from Existing Stationary Sources, Volume VI: Surface Coating of Miscellaneous Metal Parts and Products; Control of VOC Emissions from Solvent Metal Cleaning; and Control of VOC Emissions from Existing Stationary Sources, Volume VIII: Graphic Arts—Rotogravure and Flexography submitted on September 30, 2013 and adopted on December 11, 2012.

(iii) Control of VOC Emissions from Coating Operations at Aerospace Manufacturing and Rework; Control of Volatile Organic Emissions from Existing Stationary Sources—Volume II: Surface Coating of Cans, Coils, Paper, Fabrics, Automobiles, and Light-Duty Trucks; Control of Volatile Organic Emissions from Existing Stationary Sources, Volume V: Surface Coating of Large Appliances; Control of Volatile Organic Emissions from Existing Stationary Sources, Volume IV: Surface Coating of Insulation of Magnet Wire; Control of Volatile Organic Emissions from Existing Stationary Sources, Volume III: Surface Coating of Metal Furniture; 61 FR 44050 Shipbuilding and Ship Repair Operations (Surface Coating); Control of Volatile Organic emissions from Existing Stationary Sources, Volume VII: Factory Surface Coating of Flat Wood Paneling; Control of VOC Emissions from Wood Furniture Manufacturing Operations; Control of VOC Equipment Leaks from Natural Gas/Gasoline Processing Plants; Control of Refinery Vacuum Producing Systems, Wastewater Separators, and Process Unit Turnarounds; Control of VOC Leaks from Petroleum Refinery Equipment; Control of VOC Emissions from Air Oxidation Processes in Synthetic Organic Chemical Manufacturing Industry; Control of VOC Emissions from Reactor Processes and Distillation Operations in SOCMI; Control of VOC Emissions from Storage of Petroleum Liquids in Fixed Roof Tanks; Control of VOC Emissions from Petroleum Liquid Storage in External Floating Roof Tanks; Control of VOC Emissions from Large Petroleum Dry Cleaners; Control of Volatile Organic Emissions from Manufacture of Synthesized Pharmaceutical Products; Control of VOC Emissions from Manufacture of High-Density Polyethylene, Polypropylene, and Polystyrene Resins; Control of VOC Fugitive Emissions from Synthetic Organic Chemical Polymer and Resin Manufacturing Equipment; and Control of Volatile Organic Emissions from Manufacture of Pneumatic Rubber Tires were submitted on July 11, 2007 and adopted on February 6, 2007.

(iv) The following negative declarations for the 2008 NAAQS were adopted by the El Dorado County Air Quality Management District on January 3, 2017, and submitted to the EPA on January 4, 2017.

Negative Declarations for the 2008 Ozone NAAQS

Open Table
CTG document No. Title
EPA-450/2-77-008 Control of Volatile Organic Emissions from Existing Stationary Sources—Volume II: Surface Coating of Cans, Coils, Paper, Fabrics, Automobiles, and Light-Duty Trucks.
EPA-450/2-77-022 Control of Volatile Organic Emissions from Solvent Metal Cleaning.
EPA-450/2-77-025 Control of Refinery Vacuum Producing Systems, Wastewater Separators, and Process Unit Turnarounds.
EPA-450/2-77-026 Control of Hydrocarbons from Tank Truck Gasoline Loading Terminals.
EPA-450/2-77-032 Control of Volatile Organic Emissions from Existing Stationary Sources—Volume III: Surface Coating of Metal Furniture.
EPA-450/2-77-033 Control of Volatile Organic Emissions from Existing Stationary Sources—Volume IV: Surface Coating of Insulation of Magnet Wire.
EPA-450/2-77-034 Control of Volatile Organic Emissions from Existing Stationary Sources—Volume V: Surface Coating of Large Appliances.
EPA-450/2-77-036 Control of Volatile Organic Emissions from Storage of Petroleum Liquids in Fixed-Roof Tanks.
EPA-450/2-78-015 Control of Volatile Organic Emissions from Existing Stationary Sources—Volume VI: Surface Coating of Miscellaneous Metal Parts and Products.
EPA-450/2-78-029 Control of Volatile Organic Emissions from Manufacture of Synthesized Pharmaceutical Products.
EPA-450/2-78-030 Control of Volatile Organic Emissions from Manufacture of Pneumatic Rubber Tires.
EPA-450/2-78-032 Control of Volatile Organic Emissions from Existing Stationary Sources—Volume VII: Factory Surface Coating of Flat Wood Paneling.
EPA-450/2-78-033 Control of Volatile Organic Emissions from Existing Stationary Sources—Volume VIII: Graphic Arts-Rotogravure and Flexography.
EPA-450/2-78-036 Control of Volatile Organic Compound Leaks from Petroleum Refinery Equipment.
EPA-450/2-78-047 Control of Volatile Organic Emissions from Petroleum Liquid Storage in External Floating Roof Tanks.
EPA-450/3-82-009 Control of Volatile Organic Compound Emissions from Large Petroleum Dry Cleaners.
EPA-450/3-83-006 Control of Volatile Organic Compound Leaks from Synthetic Organic Chemical Polymer and Resin Manufacturing Equipment.
EPA-450/3-83-007 Control of Volatile Organic Compound Equipment Leaks from Natural Gas/Gasoline Processing Plants.
EPA-450/3-83-008 Control of Volatile Organic Compound Emissions from Manufacture of High-Density Polyethylene, Polypropylene, and Polystyrene Resins.
EPA-450/3-84-015 Control of Volatile Organic Compound Emissions from Air Oxidation Processes in Synthetic Organic Chemical Manufacturing Industry.
EPA-450/4-91-031 Control of Volatile Organic Compound Emissions from Reactor Processes and Distillation Operations in Synthetic Organic Chemical Manufacturing Industry.
EPA-453/R-96-007 Control of Volatile Organic Compound Emissions from Wood Furniture Manufacturing Operations.
EPA-453/R-94-032 61 FR 44050; 8/27/96 Alternative Control Technology Document—Surface Coating Operations at Shipbuilding and Ship Repair Facilities Control Techniques Guidelines for Shipbuilding and Ship Repair Operations (Surface Coating).
EPA-453/R-97-004 59 FR 29216; 6/6/94 Aerospace MACT and Aerospace (CTG & MACT).
EPA-453/R-06-001 Control Techniques Guidelines for Industrial Cleaning Solvents.
EPA-453/R-06-002 Control Techniques Guidelines for Offset Lithographic Printing and Letterpress Printing.
EPA-453/R-06-003 Control Techniques Guidelines for Flexible Package Printing.
EPA-453/R-06-004 Control Techniques Guidelines for Flat Wood Paneling Coatings
EPA 453/R-07-003 Control Techniques Guidelines for Paper, Film, and Foil Coatings.
EPA 453/R-07-004 Control Techniques Guidelines for Large Appliance Coatings.
EPA 453/R-07-005 Control Techniques Guidelines for Metal Furniture Coatings.
EPA 453/R-08-003 Control Techniques Guidelines for Miscellaneous Metal and Plastic Parts Coatings.
EPA 453/R-08-004 Control Techniques Guidelines for Fiberglass Boat Manufacturing Materials.
EPA 453/R-08-005 Control Techniques Guidelines for Miscellaneous Industrial Adhesives.
EPA 453/R-08-006 Control Techniques Guidelines for Automobile and Light-Duty Truck Assembly Coatings.
EPA 453/B16-001 Control Techniques Guidelines for the Oil and Natural Gas Industry.
Major non-CTG VOC sources.
Major non-CTG NOX sources.

(8) San Joaquin Valley Unified Air Pollution Control District.

(i) Synthesized Pharmaceutical Products Manufacturing and Coating Operations at Shipbuilding/Ship Repair Facilities submitted on June 18, 2009 and adopted on April 16, 2009.

(ii) Rubber Tire Manufacturing submitted on June 20, 2011 and adopted on September 20, 2010.

(iii) The following negative declarations for the 2008 NAAQS were adopted by the San Joaquin Valley Unified Air Pollution Control District on June 21, 2018, and submitted to the EPA on June 29, 2018.

Negative Declarations for the 2008 Ozone NAAQS

Open Table
CTG document No. Title
EPA-450/2-77-033 Control of Volatile Organic Emissions from Existing Stationary Sources—Volume IV: Surface Coating of Insulation of Magnet Wire.
EPA-450/2-78-029 Control of Volatile Organic Emissions from Manufacture of Synthesized Pharmaceutical Products.
EPA-450/2-78-030 Control of Volatile Organic Emissions from Manufacture of Pneumatic Rubber Tires.
EPA-450/3-83-006 Control of Volatile Organic Compound Leaks from Synthetic Organic Chemical Polymer and Resin Manufacturing Equipment.
EPA-450/3-83-008 Control of Volatile Organic Compound Emissions from Manufacture of High-Density Polyethylene, Polypropylene, and Polystyrene Resins.
EPA-450/3-84-015 Control of Volatile Organic Compound Emissions from Air Oxidation Processes in Synthetic Organic Chemical Manufacturing Industry.
EPA-450/4-91-031 Control of Volatile Organic Compound Emissions from Reactor Processes and Distillation Operations in Synthetic Organic Chemical Manufacturing Industry.
EPA-453/R-94-032 Alternative Control Technology Document—Surface Coating Operations at Shipbuilding and Ship Repair Facilities
61 FR 44050 8/27/96 Control Techniques Guidelines for Shipbuilding and Ship Repair Operations (Surface Coating).

(9) Northern Sierra Air Quality Management District.

(i) Flexible Package Printing, Flat Wood Paneling Coatings, Paper, Film, and Foil Coatings, Large Appliance Coatings, Metal Furniture Coatings, Industrial Cleaning Solvents, and Offset Lithographic Printing and Letterpress Printing were submitted on August 14, 2008 and adopted on May 19, 2008.

(ii) Fiberglass Boat Manufacturing Materials, Miscellaneous Industrial Adhesives, and Automobile and Light-Duty Truck Assembly Coatings were submitted on May 17, 2011 and adopted on April 25, 2011.

(iii) EPA-453/R-97-004 Aerospace CTG and MACT; EPA-450/2-77-008 Control of Volatile Organic Emissions from Existing Stationary Sources—Volume II: Surface Coating of Cans, Coils, Paper, Fabrics, Automobiles, and Light-Duty Trucks; EPA-450/2-78-032, Control of Volatile Organic Emissions from Existing Stationary Sources—Volume VII: Factory Surface Coating of Flat Wood Paneling; EPA-450/2-77-026, Control of Hydrocarbons from Tank Truck Gasoline Loading Terminals; EPA-450/2-78-033, Control of Volatile Organic Emissions from Existing Stationary Sources—Volume III: Graphic Arts—Rotogravure and Flexography; EPA-450/2-77-034 Control of Volatile Organic Emissions from Existing Stationary Sources—Volume V: Surface Coating of Large Appliances; EPA-450/3-82-009, Control of Volatile Organic Compound Emissions from Large Petroleum Dry Cleaners; EPA-450/2-77-033 Control of Volatile Organic Emissions from Existing Stationary Sources—Volume IV: Surface Coating of Insulation of Magnet Wire; EPA-450/2-77-032 Control of Volatile Organic Emissions from Existing Stationary Sources—Volume III: Surface Coating of Metal Furniture; EPA-450-83-007, Control of Volatile Organic Compound Equipment Leaks from Natural Gas/Gasoline Processing Plants; EPA-450/2-78-047, Control of Volatile Organic Compound Emissions from Petroleum Liquid Storage in External Floating Roof Tanks; EPA-450/2-77-025 Control of Refinery Vacuum Producing Systems, Wastewater Separators, and Process Unit Turnarounds; EPA-450/2-78-036 Control of Volatile Organic Compound Leaks from Petroleum Refinery Equipment; EPA-450/2-78-029 Control of Volatile Organic Emissions from Manufacture of Synthesized Pharmaceutical Products; EPA-450/2-78-030 Control of Volatile Organic Emissions from Manufacture of Pneumatic Rubber Tires; EPA-450/3-83-008 Control of Volatile Organic Compound Emissions from Manufacture of High-Density Polyethylene, Polypropylene, and Polystyrene Resins; EPA-450/3-83-006 Control of Volatile Organic Compound Leaks from Synthetic Organic Chemical Polymer and Resin Manufacturing Equipment; EPA-450/3-94-032, Shipbuilding/Repair; EPA-450/2-77-022, Control of Volatile Organic Emissions from Solvent Metal Cleaning; EPA-450/3-84-015 Control of Volatile Organic Compound Emissions from Air Oxidation Processes in Synthetic Organic Chemical Manufacturing Industry; EPA-450/4-91-031 Control of Volatile Organic Compound Emissions from Reactor Processes and Distillation Operations in Synthetic Organic Chemical Manufacturing Industry; EPA-453/R-96-007, Wood Furniture.

(iv) The following negative declarations for the 2008 ozone NAAQS were adopted by the Northern Sierra Air Quality Management District on March 26, 2018, and submitted to the EPA on June 7, 2018.

Table 1 to Paragraph (a)(9)(iv)—Negative Declarations for the 2008 Ozone NAAQS

Open Table
CTG document No. Title
EPA-450/2-77-008 Surface Coating of Cans.
EPA-450/2-77-008 Surface Coating of Coils.
EPA-450/2-77-008 Surface Coating of Paper.
EPA-450/2-77-008 Surface Coating of Fabric.
EPA-450/2-77-008 Surface Coating of Automobiles and Light-Duty Trucks.
EPA-450/2-77-022 Solvent Metal Cleaning.
EPA-450/2-77-025 Refinery Vacuum Producing Systems, Wastewater Separators, and Process Unit Turnarounds.
EPA-450/2-77-026 Tank Truck Gasoline Loading Terminals.
EPA-450/2-77-032 Surface Coating of Metal Furniture.
EPA-450/2-77-033 Surface Coating of Insulation of Magnet Wire.
EPA-450/2-77-034 Surface Coating of Large Appliances.
EPA-450/2-77-035 Bulk Gasoline Plants.
EPA-450/2-77-036 Storage of Petroleum Liquids in Fixed-Roof Tanks.
EPA-450/2-78-029 Manufacture of Synthesized Pharmaceutical Products.
EPA-450/2-78-030 Manufacture of Pneumatic Rubber Tires.
EPA-450/2-78-032 Factory Surface Coating of Flat Wood Paneling.
EPA-450/2-78-033 Graphic Arts-Rotogravure and Flexography.
EPA-450/2-78-036 Leaks from Petroleum Refinery Equipment.
EPA-450/2-78-047 Petroleum Liquid Storage in External Floating Roof Tanks.
EPA-450/3-82-009 Large Petroleum Dry Cleaners.
EPA-450/3-83-006 Leaks from Synthetic Organic Chemical Polymer and Resin Manufacturing Equipment.
EPA-450/3-83-007 Leaks from Natural Gas/Gasoline Processing Plants.
EPA-450/3-83-008 Manufacture of High-Density Polyethylene, Polypropylene, and Polystyrene Resins.
EPA-450/3-84-015 Air Oxidation Processes in Synthetic Organic Chemical Manufacturing Industry.
EPA-450/4-91-031 Reactor Processes and Distillation Operations in Synthetic Organic Chemical Manufacturing Industry.
EPA-453/R-96-007 Wood Furniture Manufacturing Operations.
EPA-453/R-94-032, 61 FR 44050; 8/27/96 ACT Surface Coating at Shipbuilding and Ship Repair Facilities Shipbuilding and Ship Repair Operations (Surface Coating).
EPA-453/R-97-004, 59 FR 29216; 6/06/94 Aerospace MACT and Aerospace (CTG & MACT).
EPA-453/R-06-001 Industrial Cleaning Solvents.
EPA-453/R-06-002 Offset Lithographic Printing and Letterpress Printing.
EPA-453/R-06-003 Flexible Package Printing.
EPA-453/R-06-004 Flat Wood Paneling Coatings.
EPA 453/R-07-003 Paper, Film, and Foil Coatings.
EPA 453/R-07-004 Large Appliance Coatings.
EPA 453/R-07-005 Metal Furniture Coatings.
EPA 453/R-08-003 Miscellaneous Metal Parts and Plastic Parts Coatings
Tables 3-6.
EPA 453/R-08-004 Fiberglass Boat Manufacturing Materials.
EPA 453/R-08-005 Miscellaneous Industrial Adhesives.
EPA 453/R-08-006 Automobile and Light-Duty Truck Assembly Coatings.
EPA-453/B-16-001 Oil and Natural Gas Industry.
— N/A — Major non-CTG VOC sources.
— N/A — Major non-CTG NOX sources.

(10) Ventura County Air Pollution Control District.

(i) EPA-453/R06-004 Control Techniques Guidelines for Flat Wood Paneling Coatings; EPA-453/R-07-004 Control Techniques Guidelines for Large Appliance Coatings; EPA-453/R-07-003 Control Techniques Guidelines for Paper, Film, and Foil Coatings; EPA-452/R-08-006 Control Techniques Guidelines for Automobile and Light-Duty Truck Assembly Coatings; EPA 453/R-08-005 Control Techniques Guidelines for Miscellaneous Industrial Adhesives; EPA 453/R-06-003 Control Techniques Guidelines for Flexible Package Printing; EPA 453/R-07-005 Control Techniques Guidelines for Metal Furniture Coatings; and EPA 453/R-08-004 Control Techniques Guidelines for Fiberglass Boat Manufacturing Materials were submitted on November 17, 2009 and adopted on September 15, 2009.

(ii) Negative declarations for the 2008 8-hour ozone standard: EPA-453/R-97-004 Aerospace CTG and MACT; EPA-450/2-77-008 Control of Volatile Organic Emissions from Existing Stationary Sources—Volume II: Surface Coating of Cans, Coils, Paper, Fabrics, Automobiles, and Light-Duty Trucks; EPA 453/R-08-006 Control Techniques Guidelines for Automobile and Light-Duty Truck Assembly Coatings; EPA-450/2-78-032, Control of Volatile Organic Emissions from Existing Stationary Sources—Volume VII: Factory Surface Coating of Flat Wood Paneling; EPA-453/R-06-004, Control Techniques Guidelines for Flat Wood Paneling Coatings; EPA-453/R-06-003 Control Techniques Guidelines for Flexible Package Printing; EPA-450/2-77-034 Control of Volatile Organic Emissions from Existing Stationary Sources—Volume V: Surface Coating of Large Appliances; EPA 453/R-07-004 Control Techniques Guidelines for Large Appliance Coatings; EPA-450/2-77-033 Control of Volatile Organic Emissions from Existing Stationary Sources—Volume IV: Surface Coating of Insulation of Magnet Wire; EPA-450/2-77-032 Control of Volatile Organic Emissions from Existing Stationary Sources—Volume III: Surface Coating of Metal Furniture; EPA 453/R-07-005 Control Techniques Guidelines for Metal Furniture Coatings; EPA 453/R-07-003 Control Techniques Guidelines for Paper, Film, and Foil Coatings; EPA-450/2-77-025 Control of Refinery Vacuum Producing Systems, Wastewater Separators, and Process Unit Turnarounds; EPA-450/2-78-036 Control of Volatile Organic Compound Leaks from Petroleum Refinery Equipment; EPA 453/R-08-004 Control Techniques Guidelines for Fiberglass Boat Manufacturing Materials; EPA 453/R-08-005 Control Techniques Guidelines for Miscellaneous Industrial Adhesives; EPA-450/2-78-029 Control of Volatile Organic Emissions from Manufacture of Synthesized Pharmaceutical Products; EPA-450/2-78-030 Control of Volatile Organic Emissions from Manufacture of Pneumatic Rubber Tires; EPA-450/3-83-008 Control of Volatile Organic Compound Emissions from Manufacture of High-Density Polyethylene, Polypropylene, and Polystyrene Resins; EPA-450/3-83-006 Control of Volatile Organic Compound Leaks from Synthetic Organic Chemical Polymer and Resin Manufacturing Equipment; EPA-450/3-84-015 Control of Volatile Organic Compound Emissions from Air Oxidation Processes in Synthetic Organic Chemical Manufacturing Industry; EPA-450/4-91-031 Control of Volatile Organic Compound Emissions from Reactor Processes and Distillation Operations in Synthetic Organic Chemical Manufacturing Industry; EPA-450/3-82-009 Control of Volatile Organic Compound Emissions from Large Petroleum Dry Cleaners were submitted on July 18, 2014 and adopted on June 10, 2014.

(11) Feather River Air Quality Management District.

Open Table
CTG source category Negative declaration CTG reference document 2006 RACT SIP
submitted 7/11/07
2009 RACT SIP
submitted 10/27/09
2014 RACT SIP
submitted 9/29/14
Aerospace EPA-453/R-97-004—Control of VOC Emissions from Coating Operations at Aerospace Manufacturing and Rework X X
Automobile Coating; Metal Coil Container, & Closure; Paper & Fabric EPA-450/2-77-008—Control of Volatile Organic Emissions from Existing Stationary Sources—Volume II Surface Coating of Cans, Coils, Paper, Fabrics, Automobiles, and Light-Duty Trucks X X
Automobile and Light-Duty Truck Assembly Coatings EPA-453/R-08-006—Control Techniques Guidelines for Automobile and Light-Duty Assembly Coatings X X
Cutback Asphalt EPA-450/2-77-037—Control of Volatile Organic Emissions from Use of Cutback Asphalt X X
Dry Cleaning EPA-450/3-82-009—Control of Volatile Organic Compound Emissions from Large Petroleum Dry Cleaners X X
Flat Wood Paneling Coatings EPA-453/R-06-004—Control Techniques Guidelines for Flat Wood Paneling Coatings X X
Fiberglass Boat Manufacturing Materials EPA-453/R-08-004—Control Techniques Guidelines for Fiberglass Boat Manufacturing Materials X X
Flexible Package Printing EPA-453/R06-003—Control Techniques Guidelines for Flexible Package Printing X X
Gasoline Loading Terminal EPA-450/2-77-026—Control of Hydrocarbons from Tank Truck Gasoline Loading Terminals X X
Gasoline Trucks EPA-450/2-78-051—Control of Volatile Organic Compound Leaks from Gasoline Tank Trucks and Vapor Collection Systems X X
Gasoline Bulk Plants EPA-450/2-77-035—Control of Volatile Organic Emissions from Gasoline Bulk Plants X X
Graphic Arts Rotogravure and Flexography EPA-450/2-78-033—Control of Volatile Organic Emissions from Existing Stationary Sources—Volume VIII: Rotogravure and Flexography X X
Industrial Cleaning Solvents EPA-453/R-06-001—Control Techniques Guidelines for Industrial Cleaning Solvents X X X
Large Appliance Coating EPA-450/2-77-034—Control of Volatile Organic Emissions from Existing Stationary Sources, Volume V: Surface Coating of Large Appliances X X
Large Appliance Coating EPA-453/R-07-004—Control Techniques for Large Appliance Coatings X X
Magnet Wire Coating EPA-450/2-77-033—Control of Volatile Organic Emissions from Existing Stationary Sources—Volume IV: Surface Coating of Insulation of Magnet Wire X X
Metal Can Coating; Metal Coil Coating EPA-450/2-77-008—Control of Volatile Organic Emissions from Existing Stationary Sources—Volume II: Surface Coating of Cans, Coils, Paper, Fabrics, Automobiles, and Light-Duty Trucks X X
Metal Furniture EPA-450/2-77-032—Control of Volatile Organic Emissions from Existing Stationary Sources—Volume III: Surface Coating of Metal Furniture X X
Metal Furniture Coatings EPA-453/R-07-005—Control Techniques Guidelines for Metal Furniture Coatings X X
Metal Parts and Products EPA-450/2-78-015—Control of Volatile Organic Emissions from Existing Stationary Sources—Volume VI: Surface Coating of Miscellaneous Parts and Products X X
Miscellaneous Industrial Adhesives EPA-453/R-08-005—Control Techniques Guidelines for Miscellaneous Industrial Adhesives X X X
Miscellaneous Metal and Plastic Parts Coatings EPA-453/R-08-003—Control Techniques Guidelines for Miscellaneous Metal and Plastic Parts Coatings X X
Natural Gas/Gasoline EPA-450/2-83-007—Control of VOC Equipment Leaks from Natural Gas/Gasoline Processing Plants X X
Offset Lithographic Printing and Letterpress Printing EPA-453/R-06-002—Control Techniques Guidelines for Offset Lithographic Printing and Letterpress Printing X X
Paper and Fabric Coating EPA-450/2-77-008—Control of Volatile Organic Emissions from Existing Stationary Sources—Volume II: Surface Coating of Cans, Coils, Paper, Fabrics, Automobiles, and Light-Duty Trucks X X
Paper, Film, and Foil Coatings EPA-453/R-07-003—Control Techniques Guidelines for Paper, Film, and Foil Coatings X X
Petroleum Liquid Storage Tanks EPA-450/2-77-036—Control of VOC Emissions from Storage of Petroleum Liquids in Fixed Roof Tanks X X
Petroleum Liquid Storage Tanks EPA-450/2-78-047—Control of VOC Emissions from Petroleum Liquid Storage in External Floating Roof Tanks X X
Pharmaceutical Products EPA-450/2-78-029—Control of Volatile Organic Emissions from Manufacture of Synthesized Pharmaceutical Products X X
Resin Manufacturing EPA-450/3-83-008—Control of VOC Emissions from Manufacture of High-Density Polyethylene, Polypropylene, and Polystyrene Resins X X
Resin Manufacturing EPA-450/3-83-006—Control of VOC Fugitive Emissions from Synthetic Organic Chemical Polymer and Resin Manufacturing Equipment X X
Refineries EPA-450/2-77-025—Control of Refinery Vacuum Producing Systems, Wastewater Separators, and Process Unit Turnarounds X X
Refineries EPA-450/2-78-036—Control of VOC Leaks from Petroleum Refinery Equipment X X
Rubber Tire Manufacturing EPA-450/2-78-030—Control of Volatile Organic Emissions from Manufacture of Pneumatic Rubber Tires X X
Ship Coatings 61 FR 44050 Shipbuilding and Ship Repair Operations (Surface Coating) X X
Ship Coatings EPA-453/R-94-032—Alternative Control Technology Document—Surface Coating Operations at Shipbuilding and Ship Repair Operations (Surface Coating) X
Solvent Cleaning Degreasers EPA-450/2-77-022—Control of Volatile Organic Emissions from Solvent Metal Cleaning X X
Synthetic Organic Chemical Manufacturing EPA-450/3-84-015—Control of VOC Emissions from Air Oxidation Processes in Synthetic Organic Chemical Manufacturing Industry X X
Synthetic Organic Chemical Manufacturing EPA-450/4-91-031—Control of VOC Emissions from Reactor Processes and Distillation Operations in Synthetic Organic Chemical Manufacturing Industry X X
Wood Coating Factory Surface of Flat Wood Paneling EPA-450/2-78-032—Control of Volatile Organic Emissions from Existing Stationary Sources—Volume VII: Factory Surface of Flat Wood Paneling X X
Wood Furniture Coating EPA-453/R-96-007—Control of VOC Emissions from Wood Furniture Manufacturing Operations X X

(12) Imperial County Air Pollution Control District.

(i) Submitted on December 21, 2010 and adopted on July 13, 2010.

Open Table
CTG
document No.
Title
Aerospace EPA-453/R-97-004, Aerospace CTG and MACT.
Automobile and Light-duty Trucks, Surface Coating of EPA-450/2-77-008, Control of Volatile Organic Emissions from Existing Stationary Sources—Volume II: Surface Coating of Cans, Coils, Paper, Fabrics, Automobiles, and Light-Duty Trucks.
    EPA-453/R-08-006, Control Techniques Guidelines for Automobile and Light-Duty Truck Assembly Coatings.
Cans and Coils, Surface Coating of EPA-450/2-77-008, Control of Volatile Organic Emissions from Existing Stationary Sources—Volume II: Surface Coating of Cans, Coils, Paper, Fabrics, Automobiles, and Light-Duty Trucks.
Fiberglass Boat Manufacturing EPA-453/R-08-004, Controls Techniques Guidelines for Fiberglass Boat Manufacturing.
Flat Wood Paneling, Surface Coating of EPA-450/2-78-032, Control of Volatile Organic Emissions from Existing Stationary Sources—Volume VII: Factory Surface Coating of Flat Wood Paneling.
    EPA-453/R-06-004, Control Techniques Guidelines for Flat Wood Paneling Coatings.
Flexible Packing Printing EPA-453/R-06-003, Control Techniques Guidelines for Flexible Package Printing.
Graphic Arts—Rotogravure and Flexography EPA-450/2-78-033, Control of Volatile Organic Emissions from Existing Stationary Sources, Volume III: Graphic Arts—Rotogravure and Flexography.
Large Appliances, Surface Coating of EPA-450/2-77-034, Control of Volatile Organic Emissions from Existing Stationary Sources—Volume V: Surface Coating of Large Appliances.
    EPA-453/R-07-004, Control Techniques Guidelines for Large Appliance Coatings.
Large Petroleum Dry Cleaners EPA-450/3-82-009, Control of Volatile Organic Compound Emissions from Large Petroleum Dry Cleaners.
Offset Lithographic Printing and Letterpress Printing EPA-453/R-06-002, Control Techniques Guidelines for Offset Lithographic Printing and Letterpress Printing.
Magnet Wire, Surface Coating for Insulation of EPA-450/2-77-033, Control of Volatile Organic Emissions from Existing Stationary Sources—Volume IV: Surface Coating of Insulation of Magnet Wire.
Metal Furniture Coatings EPA-450/2-77-032, Control of Volatile Organic Emissions from Existing Stationary Sources—Volume III: Surface Coating of Metal Furniture.
    EPA-453/R-07-005, Control Techniques Guidelines for Metal Furniture Coatings.
Miscellaneous Metal and Plastic Parts Coatings EPA-453/R-08-003, Control Techniques Guidelines for Miscellaneous Metal and Plastic Parts Coatings.
Miscellaneous Metal Parts and Products, Surface Coating of EPA-450/2-78-015, Control of Volatile Organic Emissions from Existing Stationary Sources—Volume IV: Surface Coating of Miscellaneous Metal Parts and Products.
Miscellaneous Industrial Adhesives EPA-453/R-08-005, Control Techniques Guidelines for Miscellaneous Industrial Adhesives.
Natural Gas/Gasoline Processing Plants Equipment Leaks EPA-450/2-83-007, Control of Volatile Organic Compound Equipment Leaks from Natural Gas/Gasoline Processing Plants.
Paper, Film and Foil Coatings EPA-453R-07-003, Control Techniques Guidelines for Paper, Film and Foil Coatings.
Petroleum Refineries EPA-450/2-77-025, Control of Refinery Vacuum Producing Systems, Wastewater Separators, and Process Unit Turnarounds.
    EPA-450/2-78-036, Control of Volatile Organic Compound Leaks from Petroleum Refinery Equipment.
Pharmaceutical Products EPA-450/2-78-029, Control of Volatile Organic Emissions from Manufacture of Synthesized Pharmaceutical Products.
Pneumatic Rubber Tires, Manufacture of EPA-450/2-78-030, Control of Volatile Organic Emissions from Manufacture of Pneumatic Rubber Tires.
Polyester Resin EPA-450/3-83-008, Control of Volatile Organic Compound Emissions from Manufacture of High-Density Polyethylene, Polypropylene, and Polystyrene Resins.
    EPA-450/3-83-006, Control of Volatile Organic Compound Leaks from Synthetic Organic Chemical Polymer and Resin Manufacturing Equipment.
Shipbuilding/Repair EPA-453/R-94-032, Shipbuilding/Repair.
Synthetic Organic Chemical EPA-450/3-84-015, Control of Volatile Organic Compound Emissions from Air Oxidation Processes in Synthetic Organic Chemical Manufacturing Industry.
    EPA-450/4-91-031, Control of Volatile Organic Compound Emissions from Reactor Processes and Distillation Operations in Synthetic Organic Chemical Manufacturing Industry.
Wood Furniture EPA-453/R-96-007, Wood Furniture.

(ii) The following negative declarations for the 2008 8-hour ozone NAAQS were adopted by the Imperial County Air Pollution Control District on September 12, 2017, and submitted to the EPA on November 14, 2017.

Open Table
CTG document No. Title
EPA-450/2-77-008 Control of Volatile Organic Emissions from Existing Stationary Sources—Volume II: Surface Coating of Cans, Coils, Paper, Fabrics, Automobiles, and Light-Duty Trucks.
EPA-450/2-77-022 Control of Volatile Organic Emissions from Solvent Metal Cleaning.
EPA-450/2-77-025 Control of Refinery Vacuum Producing Systems, Wastewater Separators, and Process Unit Turnarounds.
EPA-450/2-77-032 Control of Volatile Organic Emissions from Existing Stationary Sources—Volume III: Surface Coating of Metal Furniture.
EPA-450/2-77-033 Control of Volatile Organic Emissions from Existing Stationary Sources—Volume IV: Surface Coating of Insulation of Magnet Wire.
EPA-450/2-77-034 Control of Volatile Organic Emissions from Existing Stationary Sources—Volume V: Surface Coating of Large Appliances.
EPA-450/2-78-015 Control of Volatile Organic Emissions from Existing Stationary Sources—Volume VI: Surface Coating of Miscellaneous Metal Parts and Products.
EPA-450/2-78-029 Control of Volatile Organic Emissions from Manufacture of Synthesized Pharmaceutical Products.
EPA-450/2-78-030 Control of Volatile Organic Emissions from Manufacture of Pneumatic Rubber Tires.
EPA-450/2-78-032 Control of Volatile Organic Emissions from Existing Stationary Sources—Volume VII: Factory Surface Coating of Flat Wood Paneling.
EPA-450/2-78-033 Control of Volatile Organic Emissions from Existing Stationary Sources—Volume VIII: Graphic Arts—Rotogravure and Flexography.
EPA-450/2-78-036 Control of Volatile Organic Compound Leaks from Petroleum Refinery Equipment.
EPA-450/3-82-009 Control of Volatile Organic Compound Emissions from Large Petroleum Dry Cleaners.
EPA-450/3-83-006 Control of Volatile Organic Compound Leaks from Synthetic Organic Chemical Polymer and Resin Manufacturing Equipment.
EPA-450/3-83-007 Control of Volatile Organic Compound Equipment Leaks from Natural Gas/Gasoline Processing Plants.
EPA-450/3-83-008 Control of Volatile Organic Compound Emissions from Manufacture of High-Density Polyethylene, Polypropylene, and Polystyrene Resins.
EPA-450/3-84-015 Control of Volatile Organic Compound Emissions from Air Oxidation Processes in Synthetic Organic Chemical Manufacturing Industry.
EPA-450/4-91-031 Control of Volatile Organic Compound Emissions from Reactor Processes and Distillation Operations in Synthetic Organic Chemical Manufacturing Industry.
EPA-453/R-96-007 Control of Volatile Organic Compound Emissions from Wood Furniture Manufacturing Operations.
EPA-453/R-94-032, 61 FR 44050; 8/27/96 Control Techniques Guidelines for Shipbuilding and Ship Repair Operations (Surface Coating).
EPA-453/R-97-004, 59 FR 29216; 6/06/94 Aerospace (CTG & MACT).
EPA-453/R-06-001 Control Techniques Guidelines for Industrial Cleaning Solvents.
EPA-453/R-06-002 Control Techniques Guidelines for Offset Lithographic Printing and Letterpress Printing.
EPA-453/R-06-003 Control Techniques Guidelines for Flexible Package Printing.
EPA-453/R-06-004 Control Techniques Guidelines for Flat Wood Paneling Coatings.
EPA 453/R-07-003 Control Techniques Guidelines for Paper, Film, and Foil Coatings.
EPA 453/R-07-004 Control Techniques Guidelines for Large Appliance Coatings.
EPA 453/R-07-005 Control Techniques Guidelines for Metal Furniture Coatings.
EPA 453/R-08-003 Control Techniques Guidelines for Miscellaneous Metal and Plastic Parts Coatings, Table 2—Metal Parts and Products.
EPA 453/R-08-003 Control Techniques Guidelines for Miscellaneous Metal and Plastic Parts Coatings, Table 3—Plastic Parts and Products.
EPA 453/R-08-003 Control Techniques Guidelines for Miscellaneous Metal and Plastic Parts Coatings, Table 4—Automotive/Transportation and Business Machine Plastic Parts.
EPA 453/R-08-003 Control Techniques Guidelines for Miscellaneous Metal and Plastic Parts Coatings, Table 5—Pleasure Craft Surface Coating.
EPA 453/R-08-003 Control Techniques Guidelines for Miscellaneous Metal and Plastic Parts Coatings, Table 6—Motor Vehicle Materials.
EPA 453/R-08-004 Control Techniques Guidelines for Fiberglass Boat Manufacturing Materials.
EPA 453/R-08-005 Control Techniques Guidelines for Miscellaneous Industrial Adhesives.
EPA 453/R-08-006 Control Techniques Guidelines for Automobile and Light-Duty Truck Assembly Coatings.
EPA 453/B16-001 Control Techniques Guidelines for the Oil and Natural Gas Industry.

(13) South Coast Air Quality Management District.

(i) Negative declarations for the 2008 ozone standard: Control Techniques Guidelines for Shipbuilding and Ship Repair Operations (Surface Coating) including (published on August 27, 1996) and EPA 453/R-94-032 Alternative Control Techniques Document: Surface Coating Operations at Shipbuilding and Ship Repair Facilities; paper coating portion of EPA 453/R-07-003 Control Techniques Guidelines for Paper, Film, and Foil Coatings.

(ii) [Reserved]

(14) Yolo-Solano Air Quality Management District.

(i) The following negative declarations are for the 1997 8-hour ozone NAAQS.

Open Table
CTG source category Negative declaration CTG
reference document
Submitted
1/31/07,
adopted
9/13/06
Submitted
2/22/18,
adopted
1/10/18
Aerospace EPA-453/R-97-004 Aerospace Manufacturing and Rework Operations X
Ships 61 FR 44050 Shipbuilding and Ship Repair X
Metal Coil Container and Closure EPA-450/2-77-008 Surface Coating of Cans, Coils, Paper, Fabrics, Automobiles, and Light-Duty Trucks X
Magnetic Wire EPA-450/2-77-033 Surface Coating of Insulation of Magnet Wire X
Natural Gas/Gasoline Processing Plants, Equipment Leaks EPA-450/2-83-007 Equipment Leaks from Natural Gas/Gasoline Processing Plants X
Refineries EPA-450/2-77-025 Refinery Vacuum Producing Systems, Wastewater Separators, and Process Unit Turnarounds X
    EPA-450/2-78-036 VOC Leaks from Petroleum Refinery Equipment X
Paper and Fabric EPA-450/2-77-008 Surface Coating of Cans, Coils, Paper, Fabrics, Automobiles, and Light-Duty Trucks X
Dry Cleaning EPA-450/3-82-009 Large Petroleum Dry Cleaners X
Rubber Tires EPA-450/2-78-030 Manufacture of Pneumatic Rubber Tires X
Large Appliances, Surface Coating EPA-450/2-77-034 Surface Coating of Large Appliances X
Wood Coating EPA-450/2-78-032 Factory Surface of Flat Wood Paneling X
Polyester Resin EPA-450/3-83-006 Fugitive Emissions from Synthetic Organic Chemical Polymer and Resin Manufacturing Equipment X
    EPA-450/3-83-008 Manufacture of High-Density Polyethylene, Polypropylene, and Polystyrene Resins X
Pharmaceutical Products EPA-450/2-78-029—Control of Volatile Organic Emissions from Manufacture of Synthesized Pharmaceutical Products X
Wood Furniture Coating EPA-453/R-96-007—Control of Volatile Organic Emissions from Wood Furniture Manufacturing Operations X
Synthetic Organic Chemical EPA-450/3-84-015—Control of Volatile Organic Compound Emissions from Air Oxidation Processes in Synthetic Organic Chemical Manufacturing Industry X
    EPA-450/4-91-031—Control of Volatile Organic Compound Emissions from Reactor Processes and Distillation Operations in Synthetic Organic Chemical Manufacturing Industry X

(ii) The following negative declarations are for the 1997 and 2008 8-hour ozone NAAQS and were adopted by the District on September 13, 2017 and submitted as part of Yolo-Solano AQMD's RACT SIP on November 13, 2017.

Open Table
CTG source category Negative declaration CTG reference document
Aerospace EPA-453/R-97-004 Aerospace (CTG & MACT).
Automobile and Light-Duty Truck Assembly Coatings EPA-450/2-77-008 Control of Volatile Organic Emissions from Existing Stationary Sources—Volume II: Surface Coating of Cans, Coils, Paper, Fabrics, Automobiles, and Light-Duty Trucks.
Automobile and Light-Duty Truck Assembly Coatings EPA 453/R-08-006 Control Techniques Guidelines for Automobile and Light-Duty Truck Assembly Coatings.
Dry Cleaning EPA-450/3-82-009 Control of Volatile Organic Compound Emissions from Large Petroleum Dry Cleaners.
Flat Wood Paneling Coatings EPA-450/2-78-032 Control of Volatile Organic Emissions from Existing Stationary Sources—Volume VII: Factory Surface Coating of Flat Wood Paneling.
Flat Wood Paneling Coatings EPA-453/R-06-004 Control Techniques Guidelines for Flat Wood Paneling Coatings.
Flexible Package Printing EPA-453/R-06-003 Control Techniques Guidelines for Flexible Package Printing.
Graphic Arts Rotogravure and Flexography EPA-450/2-78-033 Control of Volatile Organic Emissions from Existing Stationary Sources—Volume VIII: Graphic Arts-Rotogravure and Flexography.
Large Appliance Coating EPA-450/2-77-034 Control of Volatile Organic Emissions from Existing Stationary Sources—Volume V: Surface Coating of Large Appliances.
Large Appliance Coating EPA 453/R-07-004 Control Techniques Guidelines for Large Appliance Coatings.
Magnet Wire Coating EPA-450/2-77-033 Control of Volatile Organic Emissions from Existing Stationary Sources—Volume IV: Surface Coating of Insulation of Magnet Wire.
Metal Can Coating; Metal Coil Coating EPA-450/2-77-008 Control of Volatile Organic Emissions from Existing Stationary Sources—Volume II: Surface Coating of Cans, Coils, Paper, Fabrics, Automobiles, and Light-Duty Trucks.
Metal Furniture Coatings EPA-450/2-77-032 Control of Volatile Organic Emissions from Existing Stationary Sources—Volume III: Surface Coating of Metal Furniture.
Metal Furniture Coatings EPA 453/R-07-005 Control Techniques Guidelines for Metal Furniture Coatings.
Miscellaneous Industrial Adhesives EPA 453/R-08-005 Control Techniques Guidelines for Miscellaneous Industrial Adhesives.
Miscellaneous Metal and Plastic Parts EPA 453/R-08-003 Control Techniques Guidelines for Miscellaneous Metal and Plastic Parts Coatings (plastic parts portion only).
Natural Gas/Gasoline EPA-450/3-83-007 Control of Volatile Organic Compound Equipment Leaks from Natural Gas/Gasoline Processing Plants.
Oil and Gas Industry EPA 453/B-16-001 Control Techniques Guidelines for the Oil and Natural Gas Industry.
Paper and Fabric Coating EPA-450/2-77-008 Control of Volatile Organic Emissions from Existing Stationary Sources—Volume II: Surface Coating of Cans, Coils, Paper, Fabrics, Automobiles, and Light-Duty Trucks.
Paper, Film, and Foil Coatings EPA 453/R-07-003 Control Techniques Guidelines for Paper, Film, and Foil Coatings.
Petroleum Liquid Storage Tanks EPA-450/2-77-036 Control of Volatile Organic Emissions from Storage of Petroleum Liquids in Fixed-Roof Tanks.
Resin Manufacturing EPA-450/3-83-008 Control of Volatile Organic Compound Emissions from Manufacture of High-Density Polyethylene, Polypropylene, and Polystyrene Resins.
Resin Manufacturing EPA-450/3-83-006 Control of Volatile Organic Compound Leaks from Synthetic Organic Chemical Polymer and Resin Manufacturing Equipment.
Pharmaceutical Products EPA-450/2-78-029 Control of Volatile Organic Emissions from Manufacture of Synthesized Pharmaceutical Products.
Refineries EPA-450/2-78-036 Control of Volatile Organic Compound Leaks from Petroleum Refinery Equipment.
Refineries EPA-450/2-77-025 Control of Refinery Vacuum Producing Systems, Wastewater Separators, and Process Unit Turnarounds.
Rubber Tire Manufacturing EPA-450/2-78-030 Control of Volatile Organic Emissions from Manufacture of Pneumatic Rubber Tires.
Ship Coatings 61 FR-44050 8/27/96 Control Techniques Guidelines for Shipbuilding and Ship Repair Operations (Surface Coating).
Synthetic Organic Chemical Manufacturing EPA-450/3-84-015 Control of Volatile Organic Compound Emissions from Air Oxidation Processes in Synthetic Organic Chemical Manufacturing Industry.
Synthetic Organic Chemical Manufacturing EPA-450/4-91-031 Control of Volatile Organic Compound Emissions from Reactor Processes and Distillation Operations in Synthetic Organic Chemical Manufacturing Industry.
Wood Furniture Coating EPA-453/R-96-007 Control of Volatile Organic Compound Emissions from Wood Furniture Manufacturing Operations.

(b) The following air pollution control districts submitted negative declarations for oxides of nitrogen source categories to satisfy the requirements of section 182 of the Clean Air Act, as amended. The following negative declarations are approved as additional information to the State Implementation Plan.

(1) Sacramento Metropolitan Air Quality Management District.

(i) Nitric and Adipic Acid Manufacturing Plants, Utility Boilers, Cement Manufacturing Plants, Glass Manufacturing Plants, and Iron and Steel Manufacturing Plants were submitted on March 4, 1996, and adopted on August 3, 1995.

(2) San Joaquin Valley Unified Air Pollution Control District.

(i) Nitric and Adipic Acid Manufacturing Plants, Cement Manufacturing Plants, Asphalt Batch Plants, Iron and Steel Manufacturing Plants, and Driers were submitted on October 17, 1994 and adopted on September 14, 1994.

(3) Placer County Air Pollution Control District.

(i) Nitric and Adipic Acid Manufacturing Plants, Utility Boilers, Cement Manufacturing Plants, Glass Manufacturing Plants, and Iron and Steel Manufacturing Plants were submitted on February 25, 1998 and adopted on October 9, 1997.

(4) Antelope Valley Air Pollution Control District.

(i) Boilers and Process Heaters In Petroleum Refineries submitted on May 13, 1999 and adopted on April 21, 1998.

(ii) Cement Kilns and Glass Melting Furnaces submitted on July 23, 1999 and adopted on March 16, 1999.

(iii) Nitric Acid Units submitted on March 28, 2000 and adopted on January 18, 2000.

[60 FR 47076, Sept. 11, 1995]


Tried the LawStack mobile app?

Join thousands and try LawStack mobile for FREE today.

  • Carry the law offline, wherever you go.
  • Download CFR, USC, rules, and state law to your mobile device.