The materials listed in this section are incorporated by reference into this part with the approval of the Director of the Federal Register under 5 U.S.C. 552(a) and 1 CFR part 51. To enforce any edition other than that specified in this section, a document must be published in the Federal Register and the material must be available to the public. All approved materials are available for inspection at the OPPT Docket in the EPA Docket Center (EPA/DC) at Rm. 3334, EPA West Bldg., 1301 Constitution Ave., NW., Washington, DC. The EPA/DC Public Reading Room hours of operation are 8:30 a.m. to 4:30 p.m., Monday through Friday, excluding legal holidays. The telephone number of the EPA/DC Public Reading Room is (202) 566-1744, and the telephone number for the OPPT Docket is (202) 566-0280. These approved materials are also available for inspection at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, call (202) 741-6030 or go to http://www.archives.gov/federal__register/code__of__federal__regulations/ibr__locations.html.\n. In addition, these materials are available from the sources listed below.

(a) ASTM materials. Copies of these materials may be obtained from ASTM International, 100 Barr Harbor Dr., P.O. Box C700, West Conshohocken, PA 19428-2959, or by calling (877) 909-ASTM, or at http://www.astm.org.

(1) ASTM D93-09 (Approved December 15, 2009), Standard Test Methods for Flash Point by Pensky-Martens Closed Tester, IBR approved for §§761.71, 761.75.

(2) ASTM D129-64 (Reapproved 1978), Standard Test Method for Sulfur in Petroleum Products (General Bomb Method), IBR approved for §761.71.

(3) ASTM D240-87, Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuel by Bomb Calorimeter, IBR approved for §761.71.

(4) ASTM D482-87, Standard Test Method for Ash from Petroleum Products, IBR approved for §761.71.

(5) ASTM D524-88, Standard Test Method for Ramsbottom Carbon Residue of Petroleum Products, IBR approved for §761.71.

(6) ASTM D808-87, Standard Test Method for Chlorine in New and Used Petroleum Products (Bomb Method), IBR approved for §761.71.

(7) ASTM D923-86, Standard Test Method for Sampling Electrical Insulating Liquids, IBR approved for §761.60.

(8) ASTM D923-89, Standard Methods of Sampling Electrical Insulating Liquids, IBR approved for §761.60.

(9) ASTM D1266-87, Standard Test Method for Sulfur in Petroleum Products (Lamp Method), IBR approved for §761.71.

(10) ASTM D1796-83 (Reapproved 1990), Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure), IBR approved for §761.71.

(11) ASTM D2158-89, Standard Test Method for Residues in Liquified Petroleum (LP) Gases, IBR approved for §761.71.

(12) ASTM D2709-88, Standard Test Method for Water and Sediment in Distillate Fuels by Centrifuge, IBR approved for §761.71.

(13) ASTM D2784-89, Standard Test Method for Sulfur in Liquified Petroleum Gases (Oxy-hydrogen Burner or Lamp), IBR approved for §761.71.

(14) ASTM D3178-84, Standard Test Methods for Carbon and Hydrogen in the Analysis Sample of Coke and Coal, IBR approved for §761.71.

(15) ASTM D3278-89, Standard Test Methods for Flash Point of Liquids by Setaflash Closed-Cup Apparatus, IBR approved for §761.75.

(16) ASTM E258-67 (Reapproved 1987), Standard Test Method for Total Nitrogen Inorganic Material by Modified KJELDAHL Method, IBR approved for §761.71.

(b) [Reserved]

[77 FR 2463, Jan. 18, 2012]