40 CFR Subpart F
Procedures for Testing Performance Characteristics of Class II Equivalent Methods for PM2.5
June 9, 2020
Table
F-6 to Subpart F of Part 53
Estimated Mass Concentration Measurement of PM2.5 for Idealized Fine Aerosol Size Distribution
§
53.60
General provisions
§
53.61
Test conditions
§
53.62
Test procedure: Full wind tunnel test
§
53.63
Test procedure: Wind tunnel inlet aspiration test
§
53.64
Test procedure: Static fractionator test
§
53.65
Test procedure: Loading test
§
53.66
Test procedure: Volatility test
Table
F-1 to Subpart F of Part 53
Performance Specifications for PM2.5 Class II Equivalent Samplers
Table
F-2 to Subpart F of Part 53
Particle Sizes and Wind Speeds for Full Wind Tunnel Test, Wind Tunnel Inlet Aspiration Test, and Static Chamber Test
Table
F-3 to Subpart F of Part 53
Critical Parameters of Idealized Ambient Particle Size Distributions
Table
F-4 to Subpart F of Part 53
Estimated Mass Concentration Measurement of PM2.5 for Idealized Coarse Aerosol Size Distribution
Table
F-5 to Subpart F of Part 53
Estimated Mass Concentration Measurement of PM2.5 for Idealized “Typical” Coarse Aerosol Size Distribution
Figure
F-1
Figure F-1 to Subpart F of Part 53—Designation Testing Checklist
Appendix
A to Subpart F of Part 53
References