1. LawStack
  2. Title 40 - Protection of Environment
  3. Chapter I - ENVIRONMENTAL PROTECTION AGENCY
  4. Subchapter C - AIR PROGRAMS
  5. Part 63 - NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR SOURCE CATEGORIES
  6. Subpart YYYY - National Emission Standards for Hazardous Air Pollutants for Stationary Combustion Turbines
  7. 40 CFR Table 2
40 CFR Table 2
Operating Limitations
June 9, 2020
CFR

As stated in §§63.6100 and 63.6140, you must comply with the following operating limitations.

Open Table
For .  .  . You must .  .  .
1. each stationary combustion turbine that is required to comply with the emission limitation for formaldehyde and is using an oxidation catalyst maintain the 4-hour rolling average of the catalyst inlet temperature within the range suggested by the catalyst manufacturer. You are not required to use the catalyst inlet temperature data that is recorded during engine startup in the calculations of the 4-hour rolling average catalyst inlet temperature.
2. each stationary combustion turbine that is required to comply with the emission limitation for formaldehyde and is not using an oxidation catalyst maintain any operating limitations approved by the Administrator.

[85 FR 13542, Mar. 9, 2020]

Previous
Table 1 Emission Limitations
Next
Table 3 Requirements for Performance Tests and Initial Compliance Demonstrations

Tried the LawStack mobile app?

Join thousands and try LawStack mobile for FREE today.

  • Carry the law offline, wherever you go.
  • Download CFR, USC, rules, and state law to your mobile device.

Designed and built by Tekk Innovations LLC, the makers of the LawStack iPhone app or Android app.

© 2020 Tekk Innovations LLC