40 CFR Table 3
Emission Limits for Puncture Sealant Application Affected Sources
June 9, 2020
As stated in §63.5988(a), you must comply with the emission limits for puncture sealant application affected sources in the following table:
Open Table
| For each . . . | You must meet the following emission limit. |
|---|---|
| 1. Option 1.a (percent reduction option)—Existing puncture sealant application spray booth | Reduce spray booth HAP (measured as volatile organic compounds (VOC)) emissions by at least 86 percent by weight. |
| 2. Option 1.b (percent reduction option)—New or reconstructed puncture sealant application spray booth | Reduce spray booth HAP (measured as VOC) emissions by at least 95 percent by weight. |
| 3. Option 2 (HAP constituent option) Existing, new or reconstructed puncture sealant application spray booth | a. Emissions of each HAP in Table 16 to this subpart must not exceed 1,000 grams HAP per megagram (2 pounds per ton) of total puncture sealants used at the puncture sealant affected source, and b. Emissions of each HAP not in Table 16 to this subpart must not exceed 10,000 grams HAP per megagram (20 pounds per ton) of total puncture sealants used at the puncture sealant affected source. |
Tried the LawStack mobile app?
Join thousands and try LawStack mobile for FREE today.
- Carry the law offline, wherever you go.
- Download CFR, USC, rules, and state law to your mobile device.
