1. LawStack
  2. Title 40 - Protection of Environment
  3. Chapter I - ENVIRONMENTAL PROTECTION AGENCY
  4. Subchapter C - AIR PROGRAMS
  5. Part 63 - NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR SOURCE CATEGORIES
  6. Subpart BBBBBBB - National Emission Standards for Hazardous Air Pollutants for Area Sources: Chemical Preparations Industry
  7. 40 CFR Table 3
40 CFR Table 3
Test Methods
June 9, 2020
CFR
Open Table
For *  *  * You must use *  *  *
1. Selecting the sampling locationsa and the number of traverse points EPA test method 1 or 1A in appendix A to part 60.
2. Determining the velocity and volumetric flow rate EPA test method 2, 2A, 2C, 2D, 2F, or 2G, as appropriate, in appendix A to part 60.
3. Determining the gas molecular weight used for flow rate determination EPA test method 3, 3A, 3B, as appropriate, in appendix A to part 60.
4. Measuring the moisture content of the stack gas EPA test method 4 in appendix A to part 60.
5. Measuring the PM emissions EPA test method 5 in appendix A to part 60.

aThe sampling locations must be located at the outlet of the process equipment (or control device, if applicable), prior to any releases to the atmosphere.

Previous
Table 2 Initial Compliance Demonstration Methods With the Emission Reduction and PM Concentration Requirements
Next
Table 4 Continuous Compliance Demonstration Methods With the Emission Reduction and PM Concentration Requirements

Tried the LawStack mobile app?

Join thousands and try LawStack mobile for FREE today.

  • Carry the law offline, wherever you go.
  • Download CFR, USC, rules, and state law to your mobile device.

Designed and built by Tekk Innovations LLC, the makers of the LawStack iPhone app or Android app.

© 2020 Tekk Innovations LLC