40 CFR Table 4
Compliance Certifications for New and Existing Affected Sources Classified as Large Iron and Steel Foundries
June 9, 2020
As required by §63.10900(b), your notification of compliance status must include certifications of compliance according to the following table:
Open Table
For. . . | Your notification of compliance status required by §63.9(h) must include this certification of compliance, signed by a responsible official: |
---|---|
Each new or existing affected source classified as a large foundry and subject to scrap management requirements in §63.10885(a)(1) and/or (2) | “This facility has prepared, and will operate by, written material specifications for metallic scrap according to §63.10885(a)(1)” and/or “This facility has prepared, and will operate by, written material specifications for general iron and steel scrap according to §63.10885(a)(2).” |
Each new or existing affected source classified as a large foundry and subject to mercury switch removal requirements in §63.10885(b) | “This facility has prepared, and will operate by, written material specifications for the removal of mercury switches and a site-specific plan implementing the material specifications according to §63.10885(b)(1)” and/or “This facility participates in and purchases motor vehicles scrap only from scrap providers who participate in a program for removal of mercury switches that has been approved by the EPA Administrator according to §63.10885(b)(2) and have prepared a plan for participation in the EPA approved program according to §63.10885(b)(2)(iv)” and/or “The only materials from motor vehicles in the scrap charged to a metal melting furnace at this facility are materials recovered for their specialty alloy content in accordance with §63.10885(b)(3) which are not reasonably expected to contain mercury switches” and/or “This facility complies with the requirements for scrap that does not contain motor vehicle scrap in accordance with §63.10885(b)(4).” |
Each new or existing affected source classified as a large foundry and subject to §63.10886 | “This facility complies with the no methanol requirement for the catalyst portion of each binder chemical formulation for a furfuryl alcohol warm box mold or core making line according to §63.10886.” |
Each new or existing affected source classified as a large foundry and subject to §63.10895(b) | “This facility operates a capture and collection system for each emissions source subject to this subpart according to §63.10895(b).” |
Each existing affected source classified as a large foundry and subject to §63.10895(c)(1) | “This facility complies with the PM or total metal HAP emissions limit in §63.10895(c) for each metal melting furnace or group of all metal melting furnaces based on a previous performance test in accordance with §63.10898(a)(1).” |
Each new or existing affected source classified as a large foundry and subject to §63.10896(a) | “This facility has prepared and will operate by an operation and maintenance plan according to §63.10896(a).” |
Each new or existing (if applicable) affected source classified as a large foundry and subject to §63.10897(d) | “This facility has prepared and will operate by a site-specific monitoring plan for each bag leak detection system and submitted the plan to the Administrator for approval according to §63.10897(d)(2).” |