40 CFR Table 7
Initial Compliance With the Emission Limits for Tire Cord Production Affected Sources
June 9, 2020
As stated in §63.5999, you must show initial compliance with the emission limits for tire cord production affected sources according to the following table:
Open Table
For . . . | For the following emission limit . . . | You have demonstrated initial compliance if . . . |
---|---|---|
1. Sources complying with the monthly average alternative without using an add-on control device according to §63.5987(a) | The production-based option in Table 2 to this subpart, option 1 | You demonstrate that the monthly average HAP emissions for each monthly operating period do not exceed the emission limits in Table 2 to this subpart, option 1, determined according to the procedures in §63.5997(a), (b)(1) and (2). |
2. Sources complying with the monthly average alternative using an add-on control device according to §63.5987(b) | The production-based option in Table 2 to this subpart, option 1 | You demonstrate that the monthly average HAP emissions for each monthly operating period do not exceed the emission limits in Table 2 to this subpart, option 1, determined according to the procedures in §63.5997(a), (b)(1) and (3) through (4), and (d) through (f). |
3. Sources complying with the monthly average alternative without using an add-on control device according to §63.5987(a) | The HAP constituent option in Table 2 to this subpart, option 2 | You demonstrate that the monthly average HAP emissions for each monthly operating period do not exceed the HAP constituent emission limits in Table 2 to this subpart, option 2, determined according to the applicable procedures in §63.5997(a) and (c)(1) and (2). |
4. Sources complying with the monthly average alternative using an add-on control device according to §63.5987(b) | The HAP constituent option in Table 2 to this subpart, option 2 | You demonstrate that the monthly average HAP emissions for each monthly operating period do not exceed the HAP constituent emission limits in Table 2 to this subpart, option 2, determined according to the applicable procedures in §63.5997(c)(1) and (3) through (4), and (d) through (f). |