(a) Within 90 calendar days after drilling completion, the operator or lessee must submit to the proper BLM office a signed copy of records of all core or test holes made on the lands covered by the lease or exploration license. The records must show the position and direction of the holes on a map. The records must include a log of all strata penetrated and conditions encountered, such as water, gas, or unusual conditions, and copies of analysis of all samples. Provide this information to the proper BLM office in either paper copy or in a BLM-approved electronic format. Contact the proper BLM office for information on submitting copies electronically. Within 30 calendar days after its creation, the operator or lessee must also submit to the proper the BLM office a detailed lithologic log of each test hole and all other in-hole surveys or other logs produced. Upon the BLM's request, the operator or lessee must provide to the BLM splits of core samples and drill cuttings.

(b) The lessee or operator must abandon surface exploration drill holes for development or holes for exploration to the BLM's satisfaction by cementing or casing or by other methods approved in advance by the BLM. Abandonment must be conducted in a manner to protect the surface and not endanger any present or future underground or surface operation or any deposit of oil, gas, other mineral substances, or ground water.

(c) Operators may convert drill holes to surveillance wells for the purpose of determining the effect of subsequent operations upon the quantity, quality, or pressure of ground water or mine gases. The BLM may require such conversion or the operator may request that the BLM approve such conversion. Prior to lease or exploration license termination, all surveillance wells must be plugged and abandoned and reclaimed, unless the surface owner assumes responsibility for reclamation of such surveillance wells. The transfer of liability for reclamation will not be considered complete until the BLM approves it in writing.

(d) Drilling equipment must be equipped with blowout control devices suitable for the pressures encountered and acceptable to the BLM.