46 CFR § 107.260
Rated load test for cranes
April 15, 2021
(a) To meet the requirements in §107.231(l), each crane must meet the following rated load test at both the maximum and minimum boom angles usually employed in material transfers over the side of the unit:
Open Table
| Rated load of assembled gear | Proof load |
|---|---|
| Less than or equal to 20 tons | 25 pct in excess. |
| Greater than 20 tons but less than or equal to 50 tons | 5 tons in excess. |
| Greater than 50 tons | 10 pct in excess. |
(b) The weight of the hook, hook blocks, slings, rib, and other rigging, except the hoist rope, must be considered part of the load for the rated load test.
(c) The rated load test must be performed—
(1) When the crane is installed;
(2) Each 60 months; and
(3) After repairs or alterations to any structural component of the crane.
[CGD 73-251, 43 FR 56802, Dec. 4, 1978, as amended by USCG-1999-6216, 64 FR 53226, Oct. 1, 1999; USCG-1999-4976, 65 FR 6504, Feb. 9, 2000]
Tried the LawStack mobile app?
Join thousands and try LawStack mobile for FREE today.
- Carry the law offline, wherever you go.
- Download CFR, USC, rules, and state law to your mobile device.
