(a) Certain material is incorporated by reference into this subchapter with the approval of the Director of the Federal Register under 5 U.S.C. 552(a) and 1 CFR part 51. To enforce any edition other than that specified in this section, the Coast Guard must publish a notice of change in the Federal Register and the material must be available to the public. All approved material is available for inspection at the U.S. Coast Guard, Office of Operating and Environmental Standards (CG-OES), 2703 Martin Luther King Jr. Avenue SE., Stop 7509, Washington, DC 20593-7509, and is available from the sources listed below. It is also available for inspection at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, call 202-741-6030 or go to http://www.archives.gov/federal__register/code__of__federal__regulations/ibr__locations.html.

(b) American Boat and Yacht Council (ABYC), 613 Third Street, Suite 10, Annapolis, MD 21403, 410-990-4460, http://www.abycinc.org.

(1) A-1-93—Marine Liquefied Petroleum Gas (LPG) Systems, IBR approved for §121.240(a), (c), (d), and (g).

(2) A-3-93—Galley Stoves, IBR approved for §121.200.

(3) A-7-70—Boat Heating Systems, IBR approved for §121.200.

(4) A-22-93—Marine Compressed Natural Gas (CNG) Systems, IBR approved for §121.240(b) through (e).

(5) H-25-94—Portable Gasoline Fuel Systems for Flammable Liquids, IBR approved for §119.458(b).

(6) P-1-93—Installation of Exhaust Systems for Propulsion and Auxiliary Engines, IBR approved for §§116.405, 119.425(c) and 119.430(k).

(c) American Bureau of Shipping (ABS), ABS Plaza, 16855 Northchase Drive, Houston, TX 77060, 281-877-5800, http://ww2.eagle.org.

(1) Rules for Building and Classing Aluminum Vessels, 1975, IBR approved for §116.300(b).

(2) Rules for Building and Classing Steel Vessels, 1995, IBR approved for §§119.410 and 120.360(a).

(3) Rules for Building and Classing Steel Vessels Under 61 Meters (200 Feet) in Length, 1983, IBR approved for §116.300(a) and (b).

(4) Rules for Building and Classing Steel Vessels for Service on Rivers and Intracoastal Waterways, 1995, IBR approved for §116.300(c).

(5) Guide for High Speed Craft, 1997, IBR approved for §116.300(b).

(d) American National Standards Institute (ANSI), 25 West 43rd Street, New York, NY 10036, 212-642-4900, http://www.ansi.org.

(1) A 17.1-1984, including supplements A 17.1a and b-1985, Safety Code for Elevators and Escalators, IBR approved for §120.540.

(2) B 31.1-1986, Code for Pressure Piping, Power Piping, IBR approved for §119.715.

(3) Z 26.1-1977, including 1980 supplement, Safety Glazing Materials For Glazing Motor Vehicles Operating on Land Highways, IBR approved for §116.1030(b).

(e) ASTM International, 100 Barr Harbor Drive, P.O. Box C700, West Conshohocken, PA 19428, 877-909-2786, http://www.astm.org.

(1) ASTM B 96-93, Standard Specification for Copper-Silicon Alloy Plate, Sheet, Strip, and Rolled Bar for General Purposes and Pressure Vessels, IBR approved for §119.440(a).

(2) ASTM B 117-97, Standard Practice for Operating Salt Spray (Fog) Apparatus, IBR approved for §114.400(b).

(3) ASTM B 122/B 122M-95, Standard Specification for Copper-Nickel-Tin Alloy, Copper-Nickel-Zinc Alloy (Nickel Silver), and Copper-Nickel Alloy Plate, Sheet, Strip, and Rolled Bar, IBR approved for §119.440(a).

(4) ASTM B 127-98, Standard Specification for Nickel-Copper Alloy (UNS NO4400) Plate, Sheet, and Strip, IBR approved for §119.440(a).

(5) ASTM B 152-97a, Standard Specification for Copper Sheet, Strip, Plate, and Rolled Bar, IBR approved for §119.440(a).

(6) ASTM B 209-96, Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate, IBR approved for §119.440(a).

(7) ASTM D 93-97, Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester, IBR approved for §114.400(b).

(8) ASTM D 635-97, Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position, IBR approved for §119.440(a).

(9) ASTM D 2863-95, Standard Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-like Combustion of Plastics (Oxygen Index), IBR approved for §119.440(a).

(10) ASTM E 84-98, Standard Test Method for Surface Burning Characteristics of Building Materials, IBR approved for §§116.405(f), 116.422(b), and 116.423(a).

(11) ASTM E 648-97, Standard Test Method for Critical Radiant Flux of Floor-Covering Systems Using a Radiant Heat Energy Source, IBR approved for §§114.400(b) and 116.423(a).

(12) ASTM E 662-97, Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials, IBR approved for §§114.400(b) and 116.423(a).

(f) Institute of Electrical and Electronics Engineers, Inc. (IEEE), IEEE Service Center, 445 Hoes Lane, Piscataway, NJ 08854, 800-678-4333, http://www.ieee.org.

(1) Standard 45-1977—Recommended Practice for Electrical Installations on Shipboard, IBR approved for §120.340(o).

(2) [Reserved]

(g) International Maritime Organization (IMO) Publishing, 4 Albert Embankment, London SE1 7SR, United Kingdom, +44 (0)20 7735 7611, http://www.imo.org.

(1) International Convention for the Safety of Life at Sea (SOLAS), as amended, Consolidated Edition, 2009, including Erratum, IBR approved for §116.400(c).

(2) Resolution A.520(13), Code of Practice for the Evaluation, Testing and Acceptance of Prototype Novel Life-Saving Appliances and Arrangements, dated 17 November 1983, IBR approved for §114.540(c).

(3) Resolution A.658(16), Use and Fitting of Retro-Reflective Materials on Life-Saving Appliances, dated 20 November 1989, IBR approved for §122.604(h) and (i).

(4) Resolution A.688(17), Fire Test Procedures For Ignitability of Bedding Components, dated 06 November 1991, IBR approved for §116.405(j).

(5) Resolution A.760(18), Symbols Related to Life-Saving Appliances and Arrangements, dated 17 November 1993, IBR approved for §122.604(f).

(h) National Fire Protection Association (NFPA), 1 Batterymarch Park, Quincy, MA 02169, 617-770-3000, http://www.nfpa.org.

(1) NFPA 10, Standard for Portable Fire Extinguishers, 2010 Edition, effective December 5, 2009, IBR approved for §115.810(b).

(2) NFPA 13, Standard for the Installation of Sprinkler Systems, 2010 Edition, effective August 26, 2009, IBR approved for §§116.439(d) and (e), and 116.440(c).

(3) NFPA 17-1994, Dry Chemical Extinguishing Systems, 1994 Edition, IBR approved for §118.425(b).

(4) NFPA 17A-1994, Wet Chemical Extinguishing Systems, 1994 Edition, IBR approved for §118.425(b).

(5) NFPA 70-1996, National Electrical Code (NEC), 1996 Edition,

(i) Section 250-95, IBR approved for §120.372(c),

(ii) Section 310-13, IBR approved for §120.340(d),

(iii) Section 310-15, IBR approved for §120.340(o),

(iv) Article 430, IBR approved for §120.320(e),

(v) Article 445, IBR approved for §120.320(d).

(6) NFPA 92B-1995, Smoke Management Systems in Malls, Atria, and Large Areas, 1995 Edition, IBR approved for §116.440(d).

(7) NFPA 261-1994, Test For Determining Resistance of Mock-up Upholstered Furniture Material Assemblies to Ignition by Smoldering Cigarettes, 1994 Edition, IBR approved for §§114.400(b) and 116.423.

(8) NFPA 302-1994, Pleasure and Commercial Motor Craft, Chapter 6, 1994 Edition, IBR approved for §§121.200 and 121.240(a) through (c), (e) and (g).

(9) NFPA 306-1993, Control of Gas Hazards on Vessels, 1993 Edition, IBR approved for §115.710(a).

(10) NFPA 701-1996, Fire Tests for Flame-Resistant Textiles and Films, 1996 Edition, IBR approved for §116.423(a).

(11) NFPA 1963-1993, Fire Hose Connections, 1993 Edition, IBR approved for §118.320(b).

(i) UL (formerly Underwriters Laboratories), 12 Laboratory Drive, P.O. Box 1399, Research Triangle Park, NC 27709, 919-549-1400, http://www.ul.com.

(1) UL 19, Standard for Safety for Lined Fire Hose and Hose Assemblies, Twelfth Edition, approved November 30, 2001, IBR approved for 118.320(b).

(2) UL 174-1989, Household Electric Storage Tank Water Heaters, as amended through June 23, 1994, IBR approved for §119.320(a).

(3) UL 486A-1992, Wire Connectors and Soldering Lugs For Use With Copper Conductors, IBR approved for §120.340(i).

(4) UL 489-1995, Molded-Case Circuit Breakers and Circuit Breaker Enclosures, IBR approved for §120.380(m).

(5) UL 595-1991, Marine Type Electric Lighting Fixtures, IBR approved for §120.410(d).

(6) UL 710-1990, Exhaust Hoods For Commercial Cooking Equipment, as amended through September 16, 1993, IBR approved for §118.425(a).

(7) UL 723-1993, Surface Burning Characteristics of Building Materials, as amended through April 20, 1994, IBR approved for §§114.400(b), 116.422(b), 116.423, and 116.425.

(8) UL 1056-1989, Fire Test of Upholstered Furniture, IBR approved for §116.423(a) and (b).

(9) UL 1058-1989, Halogenated Agent Extinguishing System Units, as amended through April 19, 1994, IBR approved for §118.410(g).

(10) UL 1102-1992, Non integral Marine Fuel Tanks, IBR approved for §119.440(a).

(11) UL 1104-1981, Marine Navigation Lights, as amended through May 4, 1988, IBR approved for §120.420.

(12) UL 1110-1988, Marine Combustible Gas Indicators, as amended through May 16, 1994, IBR approved for §119.480.

(13) UL 1453-1988, Electric Booster and Commercial Storage Tank Water Heaters, as amended through June 7, 1994, IBR approved for §119.320(a).

(14) UL 1570-1995, Fluorescent Lighting Fixtures, IBR approved for §120.410(d).

(15) UL 1571-1995, Incandescent Lighting Fixtures, IBR approved for §120.410(d).

(16) UL 1572-1995, High Intensity Discharge Lighting Fixtures, IBR approved for §120.410(d).

(17) UL 1573-1995, Stage and Studio Lighting Units, IBR approved for §120.410(d).

(18) UL 1574-1995, Track Lighting Systems, IBR approved for §120.410(d).

[USCG-2012-0196, 81 FR 48268, July 22, 2016]


Tried the LawStack mobile app?

Join thousands and try LawStack mobile for FREE today.

  • Carry the law offline, wherever you go.
  • Download CFR, USC, rules, and state law to your mobile device.