46 CFR § 172.135
Extent of damage
April 15, 2021
For the purpose of §172.133—
(a) Design calculations must include both side and bottom damage, applied separately; and
(b) Damage must consist of the penetrations having the dimensions given in Table 172.135 except that, if the most disabling penetrations would be less than the penetrations given in Table 172.135, the smaller penetration must be assumed.
Table 172.135—Extent of Damage
Open Table
| Collision Penetration | |
| Longitudinal extent | 0.495L 2⁄3 or 47.6 feet (( 1⁄3 )L 2⁄3 or 14.5m) whichever is shorter. |
| Transverse extent1 | B/5 or 37.74 feet (11.5m)2 whichever is shorter. |
| Vertical extent | From the baseline upward without limit. |
| Grounding Penetration At the Forward End But Excluding Any Damage Aft of a Point 0.3L Aft of the Forward Perpendicular | |
| Longitudinal extent | L/10. |
| Transverse extent | B/6 or 32.81 feet (10m) whichever is shorter. |
| Vertical extent from the baseline upward | B/15 or 19.7 feet (6m) whichever is shorter. |
| Grounding Penetration At Any Other Longitudinal Position | |
| Longitudinal extent | L/10 or 16.41 feet (5m) whichever is shorter. |
| Transverse extent | 16.41 feet (5m). |
| Vertical extent from the baseline upward | B/15 or 19.7 feet (6m) whichever is shorter. |
1Damage applied inboard from the vessel's side at right angles to the centerline at the level of the summer load line assigned under Subchapter E of this chapter.
2B is measured amidships.
Tried the LawStack mobile app?
Join thousands and try LawStack mobile for FREE today.
- Carry the law offline, wherever you go.
- Download CFR, USC, rules, and state law to your mobile device.
