(a) Pressure vessels shall be designed, constructed, and inspected in accordance with section VIII of the ASME Boiler and Pressure Vessel Code (incorporated by reference, see 46 CFR 54.01-1), as limited, modified, or replaced by specific requirements in this part. The provisions in the appendices to section VIII of the ASME Boiler and Pressure Vessel Code are adopted and shall be followed when the requirements in section VIII make them mandatory. For general information, table 54.01-2(a) lists the various paragraphs in section VIII of the ASME Boiler and Pressure Vessel Code that are limited, modified, or replaced by regulations in this part.
Table 54.01-2(a)—Limitations and Modifications in the Adoption of Section VIII of the ASME Boiler and Pressure Vessel Code
Paragraphs in section VIII of the ASME Boiler and Pressure Vessel Code1 and disposition | Unit of this part |
---|---|
U-1 and U-2 modified by | 54.01-5 through 54.01-15. |
U-1(c) replaced by | 54.01-5. |
U-1(d) replaced by | 54.01-5(a) and 54.01-15. |
U-1(g) modified by | 54.01-10. |
U-1(c)(2) modified by | 54.01-15. |
UG-11 modified by | 54.01-25. |
UG-22 modified by | 54.01-30. |
UG-25 modified by | 54.01-35. |
UG-28 modified by | 54.01-40. |
UG-84 replaced by | 54.05-1. |
UG-90 and UG-91 replaced by | 54.10-3. |
UG-92 through UG-103 modified by | 54.10-1 through 54.10-15. |
UG-98 reproduced by | 54.10-5. |
UG-115 through UG-120 modified by | 54.10-1. |
UG-116, except (k), replaced by | 54.10-20(a). |
UG-116(k) replaced by | 54.10-20(b). |
UG-117 replaced by | 54.10-20(c). |
UG-118 replaced by | 54.10-20(a). |
UG-119 modified by | 54.10-20(d). |
UG-120 modified by | 54.10-25. |
UG-125 through UG-137 modified by | 54.15-1 through 54.15-15. |
UW-1 through UW-65 modified by | 54.20-1. |
UW-2(a) replaced by | 54.01-5(b) and 54.20-2. |
UW-2(b) replaced by | 54.01-5(b) and 54.20-2. |
UW-9, UW-11(a), UW-13, and UW-16 modified by | 54.20-3. |
UW-11(a) modified by | 54.25-8. |
UW-26, UW-27, UW-28, UW-29, UW-47, and UW-48 modified by | 54.20-5. |
UB-1 modified by | 54.23-1 |
UB-2 modified by | 52.01-95(d) and 56.30-30(b)(1). |
UCS-6 modified by | 54.25-3. |
UCS-56 modified by | 54.25-7. |
UCS-57, UNF-57, UHA-33, and UHT-57 modified by | 54.25-8. |
UCS-65 through UCS-67 replaced by | 54.25-10. |
UHA-23(b) and UHA-51 modified by | 54.25-15. |
UHT-5(c), UHT-6, and UHT-23 modified by | 54.25-20. |
UHT-82 modified by | 54.25-20 and 54.25-25. |
Appendix 3 modified by | 54.15-3. |
1The references to specific provisions in section VIII of the ASME Boiler and Pressure Vessel Code are coded. The first letter, such as “U,” refers to division 1 of section VIII. The second letter, such as “G,” refers to a subsection within section VIII. The number refers to the paragraph within the subsection.
(b) References to the ASME Boiler and Pressure Vessel Code, such as paragraph UG-125, indicate:
U = Division 1 of section VIII of the ASME Boiler and Pressure Vessel Code.
G = Part containing general requirements.
125 = Paragraph within part.
(c) When a paragraph or a section of the regulations in this part relates to material in section VIII of the ASME Boiler and Pressure Vessel Code, the relationship with the code will be shown immediately following the heading of the section or at the beginning of the paragraph, as follows:
(1) (Modifies U___.) This indicates that the material in U___ is generally applicable but is being altered, amplified or augmented.
(2) (Replaces U___.) This indicates that U___ does not apply.
(3) (Reproduces U___.) This indicates that U___ is being identically reproduced for convenience, not for emphasis.
[CGFR 68-82, 33 FR 18828, Dec. 18, 1968, as amended by CGFR 69-127, 35 FR 9976, June 17, 1970; CGFR 72-59R, 37 FR 6188, Mar. 25, 1972; CGD 72-206R, 38 FR 17226, June 29, 1973; CGD 73-254, 40 FR 40163, Sept. 2, 1975; CGD 77-147, 47 FR 21809, May 20, 1982; CGD 85-061, 54 FR 50963, Dec. 11, 1989. Redesignated by CGD 88-032, 56 FR 35822, July 29, 1991; USCG-2003-16630, 73 FR 65164, Oct. 31, 2008]