(a) Matter incorporated by reference—

(1) General. Certain material is incorporated by reference into subchapters A, B, and C with the approval of the Director of the Federal Register under 5 U.S.C. 552(a) and 1 CFR part 51. To enforce any edition other than that specified in this section, PHMSA must publish a document in the Federal Register and the material must be available to the public. Matters referenced by footnote are included as part of the regulations of this subchapter.

(2) Accessibility of materials. All incorporated matter is available for inspection at:

(i) The Office of Hazardous Materials Safety, Office of Hazardous Materials Standards, East Building, PHH-10, 1200 New Jersey Avenue SE., Washington, DC 20590-0001. For information on the availability of this material at PHH-10, call 1-800-467-4922, or go to: http://www.phmsa.dot.gov; and

(ii) The National Archives and Records Administration (NARA). For information on the availability of this material at NARA, call 202-741-6030, or go to: http://www.archives.gov/federal__register/code__of__federal__regulations/ibr__locations.html.

(b) Air Transport Association of America, 1301 Pennsylvania Avenue NW., Washington, DC 20004-1707.

(1) ATA Specification No. 300 Packaging of Airline Supplies, Revision 19, July 31, 1996, into §172.102.

(2) [Reserved]

(c) The Aluminum Association, 1525 Wilson Blvd., Suite 6000, Arlington, VA 22209, telephone 703-358-2960, http://www.aluminum.org.

(1) Aluminum Standards and Data, Seventh Edition, June 1982, into §§172.102; 178.65.

(2) Welding Aluminum: Theory and Practice, 2002 Fourth Edition, into §178.68.

(d) American National Standards Institute, Inc., 25 West 43rd Street, New York, NY 10036.

(1) ANSI/ASHRAE 15-94, Safety Code for Mechanical Refrigeration, 1944, into §§173.306; 173.307.

(2) ANSI N14.1   Uranium Hexafluoride—Packaging for Transport, 1971 Edition, into §§173.417; 173.420.

(3) ANSI N14.1   Uranium Hexafluoride—Packaging for Transport, 1982 Edition, into §§173.417; 173.420.

(4) ANSI N14.1   Uranium Hexafluoride—Packaging for Transport, 1987 Edition, into §§173.417; 173.420.

(5) ANSI N14.1   Uranium Hexafluoride—Packaging for Transport, 1990 Edition, into §§173.417; 173.420.

(6) ANSI N14.1   Uranium Hexafluoride—Packaging for Transport, 1995 Edition, into §§173.417; 173.420.

(7) ANSI N14.1   Uranium Hexafluoride—Packaging for Transport, 2001 Edition, into §§173.417; 173.420.

(e) American Petroleum Institute, 1220 L Street NW., Washington, DC 20005-4070.

(1) API Recommended Practice Closures of Underground Petroleum Storage Tanks, 3rd Edition, March 1996, into §172.102.

(2) [Reserved]

(f) American Pyrotechnics Association (APA), P.O. Box 30438, Bethesda, MD 20824, (301) 907-8181, www.americanpyro.com.

(1) APA Standard 87-1, Standard for Construction and Approval for Transportation of Fireworks, Novelties, and Theatrical Pyrotechnics, December 1, 2001 version into §173.56.

(2) [Reserved]

(g) The American Society of Mechanical Engineers

(ASME), 150 Clove Road, Little Falls, NJ 07424-2139, telephone 1-800-843-2763, http://www.asme.org.

(1) 2015 ASME Boiler and Pressure Vessel Code (ASME Code), 2015 Edition, July 1, 2015 (as follows), into §§172.102; 173.3; 173.5b; 173.24b; 173.306; 173.315; 173.318; 173.420; 178.255-1; 178.255-2; 178.255-14; 178.255-15; 178.273; 178.274; 178.276; 178.277; 178.320; 178.337-1; 178.337-2; 178.337-3; 178.337-4; 178.337-6; 178.337-16; 178.337-18; 178.338-1; 178.338-2; 178.338-3; 178.338-4; 178.338-5; 178.338-6; 178.338-13; 178.338-16; 178.338-18; 178.338-19; 178.345-1; 178.345-2; 178.345-3; 178.345-4; 178.345-7; 178.345-14; 178.345-15; 178.346-1; 178.347-1; 178.348-1; 179.400-3; 180.407:

(i) Section II—Materials—Part A—Ferrous Materials Specifications.

(ii) Section II—Materials—Part B—Nonferrous Material Specifications.

(iii) Section V—Nondestructive Examination.

(iv) Section VIII—Rules for Construction of Pressure Vessels Division 1.

(v) Section IX—Welding, Brazing, and Fusing Qualifications.

(2) ASME B31.4-2012, Pipeline Transportation Systems for Liquids and Slurries, November 12, 2012, into §173.5a.

(h) ASTM International, 100 Barr Harbor Drive, West Conshohocken, PA 1942, telephone (610) 832-9585, http://www.astm.org. Copies of historical standards or standards that ASTM does not have may be purchased from: Engineering Societies Library, 354 East 47th Street, New York, NY 10017.

(1) ASTM A 20/A 20M-93a   Standard Specification for General Requirements for Steel Plates for Pressure Vessels, 1993, into §§178.337-2; 179.102-4; 179.102-1; 179.102-17.

(2) ASTM A 47-68   Malleable Iron Castings, 1968, into §179.200-15.

(3) ASTM A 53/A 53M-06a (ASTM A 53) Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless, 2006, into §173.5b.

(4) ASTM A 106/A 106M-06a (ASTM A 106) Standard Specification for Seamless Carbon Steel Pipe for High-Temperature Service, 2006, into §173.5b.

(5) ASTM A 240/A 240M-99b   Standard Specification for Heat-Resisting Chromium and Chromium-Nickel Stainless Steel Plate, Sheet and Strip for Pressure Vessels, 1999, into §§178.57; 178.358-5; 179.100-7; 179.100-10; 179.102-1; 179.102-4; 179.102-17; 179.200-7; 179.201-5; 179.220-7; 179.300-7; 179.400-5.

(6) ASTM A 242-81   Standard Specification for High-Strength Low-Alloy Structural Steel, 1981, into §178.338-2.

(7) ASTM A 262-93a   Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels, 1993, into 179.100-7; 179.200-7; 179.201-4.

(8) ASTM A 285-78   Pressure Vessel Plates, Carbon Steel, Low- and Intermediate-Tensile Strength, 1978, into §179.300-7.

(9) ASTM A 300-58   Steel Plates for Pressure Vessels for Service at Low Temperatures, 1958, into §178.337-2.

(10) ASTM A 302/A 302M-93   Standard Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Molybdenum and Manganese-Molybdenum Nickel, 1993, into §179.100-7; 179.200-7; 179.220-7.

(11) ASTM A 333-67   Seamless and Welded Steel Pipe for Low-Temperature Service, 1967, into §178.45.

(12) ASTM A 370-94   Standard Test 179.102-1; 179.102-4; Methods and Definitions for Mechanical Testing of Steel Products, 1994, into §§179.102-17; 179.102-1; 179.102-4.

(13) ASTM A 441-81   Standard Specification for High-Strength Low-Alloy Structural Manganese Vanadium Steel, 1981, into §178.338-2.

(14) ASTM A 514-81   Standard Specification for High-Yield Strength Quenched and Tempered Alloy Steel Plate, Suitable for Welding, 1981, into §178.338-2.

(15) ASTM A 515/A 515M-03   Standard Specification for Pressure Vessel Plates, Carbon Steel, for Intermediate- and Higher-Temperature Service, 2003, into §179.300-7.

(16) ASTM A 516/A 516M-90   Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate and Lower-Temperature Service, 1990, into §178.337-2; 179.100-7; 179.102-1; 179.102-2; 179.102-4; 179.102-17; 179.200-7; 179.220-7; 179.300-7.

(17) ASTM A 537/A 537M-91   Standard Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel, 1991, into §179.100-7; 179.102-4; 179.102-17.

(18) ASTM A 572-82   Standard Specification for High-Strength Low-Alloy Columbian-Vanadium Steels of Structural Quality, 1982, into §178.338-2.

(19) ASTM A 588-81   Standard Specification for High-Strength Low-Alloy Structural Steel with 50 Ksi Minimum Yield Point to 4 in. Thick, 1981, into §178.338-2.

(20) ASTM A 606-75   Standard Specification for Steel Sheet and Strip Hot-Rolled and Cold-Rolled, High-Strength, Low-Alloy, with Improved Atmospheric Corrosion Resistance, 1975 (Reapproved 1981), into §178.338-2.

(21) ASTM A 607-98   Standard Specification for Steel, Sheet and Strip, High-Strength, Low-Alloy, Columbium or Vanadium, or Both, Hot-Rolled and Cold-Rolled, 1998, into §178.338-2.

(22) ASTM A 612-72a   High Strength Steel Plates for Pressure Vessels for Moderate and Lower Temperature Service, 1972, into §178.337-2.

(23) ASTM A 633-79a   Standard Specification for Normalized High-Strength Low-Alloy Structural Steel, 1979 Edition, into §178.338-2.

(24) ASTM A 715-81   Standard Specification for Steel Sheet and Strip, Hot-Rolled, High-Strength, Low-Alloy with Improved Formability, 1981, into §178.338-2.

(25) ASTM A 1008/A 1008M-03   Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy and High Strength Low-Alloy with Improved Formability, 2003, into §178.338-2; 178.345-2.

(26) ASTM A 1011/A 1011M-03a   Standard Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low Alloy and High Strength Low-Alloy with Improved Formability, 2003, into §178.338-2; 178.345-2.

(27) ASTM B 162-93a   Standard Specification for Nickel Plate, Sheet, and Strip, 1993, into §173.249; 179.200-7.

(28) ASTM B 209-93   Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate, 1993, into §179.100-7; 179.200-7; 179.220-7.

(29) ASTM B 221-76   Aluminum Alloy Extruded Bars, Rods, Shapes, and Tubes, 1976, into §178.46.

(30) ASTM B 557-84   Tension Testing Wrought and Cast Aluminum and Magnesium-Alloy Products, 1984, into §178.46.

(31) ASTM B 580-79   Standard Specification for Anodic Oxide Coatings on Aluminum, (Re-approved 2000), into §173.316; 173.318; 178.338-17.

(32) ASTM D 56-05, Standard Test Method for Flash Point by Tag Closed Cup Tester, approved May 1, 2005, into §173.120.

(33) ASTM D 86-07a, Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure, approved April 1, 2007, into §173.121.

(34) ASTM D 93-08, Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester, approved October 15, 2008, into §173.120.

(35) ASTM D 1078-05, Standard Test Method for Distillation Range of Volatile Organic Liquids, approved May 15, 2005, into §173.121.

(36) ASTM D 1238-90b   Standard Test Method for Flow Rates of Thermoplastics for Extrusion Plastometer, 1990, into §173.225.

(37) ASTM D 1709-01   Standard Test Methods for Impact Resistance of Plastic Film by the Free-Falling Dart Method, 2001, into §173.197.

(38) ASTM D 1835-97   Standard Specification for Liquefied Petroleum (LP) Gases, 1997, into §180.209.

(39) ASTM D 1838-64   Copper Strip Corrosion by Liquefied Petroleum (LP) Gases, 1964, into §173.315.

(40) ASTM D 1922-00a   Standard Test Method for Propogation Tear Resistance of Plastic Film and Thin Sheeting by Pendulum Method, 2000, into §173.197.

(41) ASTM D 3278-96   (Reapproved 2004) E1, Standard Test Methods for Flash Point of Liquids by Small Scale Closed-Cup Apparatus, approved November 1, 2004, into §173.120.

(42) ASTM D 3828-07a, Standard Test Methods for Flash Point by Small Scale Closed Cup Tester, approved July 15, 2007, §173.120.

(43) ASTM D 4206-96   Standard Test Method for Sustained Burning of Liquid Mixtures Using the Small Scale Open-Cup Apparatus, 1996, into §173.120.

(44) ASTM D 4359-90 Standard Test Method for Determining Whether a Material is a Liquid or a Solid, 1990 into §§130.5, 171.8.

(45) ASTM D7900-13e1, Standard Test Method for Determination of Light Hydrocarbons in Stabilized Crude Oils by Gas Chromatography, Approved December 1, 2013, into §173.121.

(46) ASTM E 8-99   Standard Test Methods for Tension Testing of Metallic Materials, 1999, into §178.36; 178.37; 178.38; 178.39; 178.44; 178.45; 178.50; 178.51; 178.53; 178.55; 178.56; 178.57; 178.58; 178.59; 178.60; 178.61; 178.68.

(47) ASTM E 23-98   Standard Test Methods for Notched Bar Impact Testing of Metallic Materials, 1998, into §178.57.

(48) ASTM E 112-88   Standard Test Methods for Determining Average Grain Size, 1988, into §178.44.

(49) ASTM E 112-96   Standard Test Methods for Determining Average Grain Size, 1996 Edition, into §178.274; part 178, appendix A.

(50) ASTM E 114-95   Standard Practice for Ultrasonic Pulse-Echo Straight-Beam Examination by the Contact Method, 1995, into §178.45.

(51) ASTM E 213-98   Standard Practice for Ultrasonic Examination of Metal Pipe and Tubing, into §178.45.

(52) ASTM E 290-97a   Standard Test Methods for Bend Testing of Material for Ductility, published February 1998, into §178.37.

(i) [Reserved]

(j) American Welding Society, 550 NW. Le Jeune Road, Miami, Florida 33126.

(1) AWS Code B 3.0; Standard Qualification Procedure; 1972 (FRB 3.0-41, rev. May 1973), into §§178.356-2, 178.358-2.

(2) AWS Code D 1.0; Code for Welding in Building Construction (FR D 1.0-66, 1966), into §§178.356-2; 178.358-2.

(k) Association of American Railroads, American Railroads Building, 50 F Street NW., Washington, DC 20001; telephone (877) 999-8824, http://www.aar.org/publications.com.

(1) AAR Manual of Standards and Recommended Practices, Section C—Part III, Specifications for Tank Cars, Specification M-1002, (AAR Specifications for Tank Cars), December 2000, §§173.31; 179.6; 179.7; 179.15; 179.16; 179.20; 179.22; 179.24; 179.100-9; 179.100-10; 179.100-12; 179.100-13; 179.100-14; 179.100-18; 179.101-1; 179.102-1; 179.102-4; 179.102-17; 179.103-5; 179.200-7; 179.200-9; 179.200-10; 179.200-11; 179.200-13; 179.200-17; 179.200-22; 179.201-6; 179.220-6; 179.220-7; 179.220-10; 179.220-11; 179.220-14; 179.220-18; 179.220-26; 179.300-9; 179.300-10; 179.300-15; 179.300-17; 179.400-5; 179.400-6; 179.400-8; 179.400-11; 179.400-12; 179.400-15; 179.400-18; 179.400-20; 179.400-25; 180.503; 180.509; 180.513; 180.515; 180.517.

(2) AAR Manual of Standards and Recommended Practices, Section C—III, Specifications for Tank Cars, Specification M-1002 (AAR Specifications for Tank Cars), Appendix E, Design Details, implemented April 2010; into §§179.202-9, and 179.202-12(f).

(3) AAR Manual of Standards and Recommended Practices, Section I, Specially Equipped Freight Car and Intermodal Equipment, 1988, into §174.55; 174.63.

(4) AAR Specifications for Design, Fabrication and Construction of Freight Cars, Volume 1, 1988, into §179.16.

(5) AAR Standard 286; AAR Manual of Standards and Recommended Practices, Section C, Car Construction Fundamentals and Details, Standard S-286, Free/Unrestricted Interchange for 286,000 lb Gross Rail Load Cars (Adopted 2002; Revised: 2003, 2005, 2006), into 179.13.

(l) Chlorine Institute, Inc., 1300 Wilson Boulevard, Arlington, VA 22209.

(1) Chlorine Institute Emergency Kit “A” for 100-lb. & 150-lb. Chlorine Cylinders, Edition 12, Revision 2, January 2014, into §173.3.

(2) Chlorine Institute Emergency Kit “B” for Chlorine Ton Containers, Edition 11, July 2014, into §173.3.

(3) Type 1 JQ 225, Dwg., H51970, Revision F, November 1996, into §173.315.

(4) Type 1 JQ 225, Dwg. H50155, Revision H, November 1996, into §173.315.

(5) Pamphlet 57, Emergency Shut-Off Systems for Bulk Transfer of Chlorine, Edition 6, June 2015, into §177.840.

(6) Section 3, Pamphlet 166, Angle Valve Guidelines for Chlorine Bulk Transportation, 1st Edition, October 2002, into §178.337-9.

(7) Pamphlet 168, Guidelines for Dual Valve Systems for Bulk Chlorine Transport, Edition 2, July 2015, into §178.337-9.

(8) Standard Chlorine Angle Valve Assembly, Dwg. 104-8, July 1993, into §178.337-9.

(9) Excess Flow Valve with Removable Seat, Dwg. 101-7, July 1993, into §178.337-8.

(10) Excess Flow Valve with Removable Basket, Dwg. 106-6, July 1993, into §178.337-8.

(11) Standards for Housing and Manway Covers for Steel Cargo Tanks, Dwgs. 137-1 and 137-2, September 1, 1982, into §178.337-10.

(12) Typical Manway Arrangement Chlorine Cargo Tank, Dwg 137-5, November 1996, into 178.337-10.

(m) Canadian General Standards Board, Place du Portage III, 6B1 11 Laurier Street, Gatineau, Quebec, Canada K1A 1G6.

(1) National Standard of Canada (CAN/CGSB 43.147—2005) Construction, Modification, Qualification, Maintenance, and Selection and Use of Means of Containment for the Handling, Offering for Transport, or Transportation of Dangerous Goods by Rail, into §171.12.

(2) [Reserved]

(n) Compressed Gas Association (CGA), 1235 Jefferson Davis Highway, Arlington, VA 22202.

(1) CGA Pamphlet C-3, Standards for Welding on Thin-Walled Steel Cylinders, 1994, into §178.47; 178.50; 178.51; 178.53; 178.55; 178.56; 178.57; 178.58; 178.59; 178.60; 178.61; 178.65; 178.68; 180.211.

(2) CGA C-5, Cylinder Service Life—Seamless Steel High Pressure Cylinders, 1991 (reaffirmed 1995), into §173.302a.

(3) CGA Pamphlet C-6, Standards for Visual Inspection of Steel Compressed Gas Cylinders, 1993, into §172.102, §173.3, 173.198, 180.205, 180.209, 180.211, 180.411, 180.519.

(4) CGA Pamphlet C-6.1, Standards for Visual Inspection of High Pressure Aluminum Compressed Gas Cylinders, 2002, Fourth Edition, into §180.205; 180.209.

(5) CGA Pamphlet C-6.2, Guidelines for Visual Inspection and Requalification of Fiber Reinforced High Pressure Cylinders, 1996, Third Edition, into §180.205.

(6) CGA Pamphlet C-6.3, Guidelines for Visual Inspection and Requalification of Low Pressure Aluminum Compressed Gas Cylinders, 1991, into §180.205; 180.209.

(7) CGA C-7-2014, Guide to Classification and Labeling of Compressed Gases, Tenth Edition, copyright 2014, into §172.400a.

(8) CGA Pamphlet C-8, Standard for Requalification of DOT-3HT Cylinder Design, 1985, into §180.205; 180.209.

(9) CGA Pamphlet C-11, Recommended Practices for Inspection of Compressed Gas Cylinders at Time of Manufacture, 2001, Third Edition, into §178.35.

(10) CGA Pamphlet C-12, Qualification Procedure for Acetylene Cylinder Design, 1994, into §173.301; 173.303; 178.59; 178.60.

(11) CGA Pamphlet C-13, Guidelines for Periodic Visual Inspection and Requalification of Acetylene Cylinders, 2000, Fourth Edition, into §173.303; 180.205; 180.209.

(12) CGA Pamphlet C-14, Procedures for Fire Testing of DOT Cylinder Pressure Relief Device Systems, 1979, into §173.301; 173.323.

(13) CGA G-1.6-2011, Standard for Mobile Acetylene Trailer Systems, Seventh Edition, copyright 2011, into §173.301.

(14) CGA Pamphlet G-2.2, Guideline Method for Determining Minimum of 0.2% Water in Anhydrous Ammonia, 1985, Second Edition, Reaffirmed 1997, into §173.315.

(15) CGA Pamphlet G-4.1, Cleaning Equipment for Oxygen Service, 1985, into §178.338-15.

(16) CGA Pamphlet P-20, Standard for the Classification of Toxic Gas Mixtures, 1995, into §173.115.

(17) CGA Pamphlet P-20, Standard for the Classification of Toxic Gas Mixtures, 2003, Third Edition, into §173.115.

(18) CGA S-1.1, Pressure Relief Device Standards—Part 1—Cylinders for Compressed Gases, (with the exception of paragraph 9.1.1.1), Twelfth Edition, 2005, into §173.301, 173.304a 178.75.

(19) CGA Pamphlet S-1.2, Safety Relief Device Standards Part 2—Cargo and Portable Tanks for Compressed Gases, 1980, into §173.315; 173.318; 178.276; 178.277.

(20) CGA S-7, Method for Selecting Pressure Relief Devices for Compressed Gas Mixtures in Cylinders, 2005, into §173.301.

(21) CGA Technical Bulletin TB-2, Guidelines for Inspection and Repair of MC-330 and MC-331 Cargo Tanks, 1980, into §180.407; 180.413.

(22) CGA Technical Bulletin TB-25, Design Considerations for Tube Trailers, 2008 Edition, into §173.301.

(23) CGA V-9-2012, Compressed Gas Association Standard for Compressed Cylinder Valves, Seventh Edition, 2012, into §173.301.

(o) Department of Defense (DoD), DoD Explosives Safety Board, 4800 Mark Center Drive, Suite 16E12, Alexandria, VA 22350, https://www.ddesb.pentagon.mil/; or Defense Logistics Agency, Technical and Quality Assurance Division, 8725 John J. Kingman Rd., Fort Belvoir, VA 22060, http://www.dla.mil/Pages/default.aspx.

(1) TB 700-2; NAVSEAINST 8020.8C/TO 11A-1-47: DOD Ammunition and Explosives Hazard Classification Procedures, July 30, 2012, into §173.56.

(2) DLAR 4145.41/AR 700-143/NAVSUPINST 4030.55D/AFMAN 24-210__IP/MCO 4030.40C: Packaging of Hazardous Material, April 21, 2015, into §173.7.

(p) [Reserved]

(q) General Services Administration, Specification Office, Room 6662, 7th and D Street, S.W., Washington, DC 20407.

(1) Federal Specification RR-C-901D, Cylinders, Compressed Gas: Seamless Shatterproof, High Pressure DOT 3AA Steel, and 3AL Aluminum, February 21, 2003, into §§173.302; 173.336; 173.337.

(2) [Reserved]

(r) Institute of Makers of Explosives, 1120 19th Street NW., Suite 310, Washington, DC 20036-3605.

(1) IME Standard 22,IME Safety Library Publication No. 22, Recommendations for the Safe Transportation of Detonators in a Vehicle with Certain Other Explosive Materials, February 2007, into §§173.63; 177.835.

(2) IME Standard 23, IME Safety Library Publication No. 23 (IME Standard 23), Recommendations for the Transportation of Explosives, Division 1.5, Ammonium Nitrate Emulsions, Division 5.1, Combustible Liquids, Class 3, and Corrosives, Class 8 in Bulk Packaging, October 2011, into §§173.66(intro); 177.835(d).

(s) International Atomic Energy Agency (IAEA), P.O. Box 100, Wagramer Strasse 5, A-1400 Vienna, Austria. Also available from: Bernan Associates, 4611-F Assembly Drive, Lanham, MD 20706-4391, USA; or Renouf Publishing Company, Ltd., 812 Proctor Avenue, Ogdensburg, New York 13669, USA.

(1) IAEA Safety Standards for Protecting People and the Environment; Regulations for the Safe Transport of Radioactive Material, No. SSR-6, (IAEA Regulations), 2012 Edition, into §§171.22; 171.23; 171.26; 173.415; 173.416; 173.417; 173.435; 173.473.

(2) Code of Conduct on the Safety and Security of Radioactive Sources (International Atomic Energy Agency Code of Conduct), copyright 2004, into §172.800.

(t) International Civil Aviation Organization (“ICAO”), 999 Robert-Bourassa Boulevard, Montréal, Quebec H3C 5H7, Canada, 1-514-954-8219, http://www.icao.int. ICAO Technical Instructions available from: ICAO Document Sales Unit, sales@icao.int.

(1) ICAO Doc 9284, Technical Instructions for the Safe Transport of Dangerous Goods by Air (ICAO Technical Instructions), 2019-2020 Edition, copyright 2018, into §§171.8; 171.22; 171.23; 171.24; 172.101; 172.202; 172.401; 172.407; 172.512; 172.519; 172.602; 173.56; 173.320; 175.10, 175.33; 178.3.

(2) [Reserved]

(u) International Electrotechnical Commission (IEC), 3 rue de Varembé, P.O. Box 131, CH—1211, GENEVA 20, Switzerland.

(1) IEC 62282-6-100:2010(E), Fuel cell technologies—Part 6-100: Micro fuel cell power systems—Safety, Edition 1.0, March 2010, into §§173.230; 175.10.

(2) 62282-6-100 Amend. 1 IEC 2012(E), Amendment 1 to IEC 62282-6-100: Fuel cell technologies—Part 6-100: Micro fuel cell power systems—Safety, Edition 1.0, October 2012, into §§173.230; 175.10

(v) International Maritime Organization (“IMO”), 4 Albert Embankment, London, SE1 7SR, United Kingdom, + 44 (0) 20 7735 7611, http://www.imo.org. IMDG Code available from: IMO Publishing, sales@imo.org.

(1) International Convention for the Safety of Life at Sea, 1974, Consolidated Edition (SOLAS), Chapter II-2, Construction—Fire protection, fire detection and fire extinction, Regulation 19, Carriage of dangerous goods, Fifth Edition 2009, into §§176.63, 176.84.

(2) International Maritime Dangerous Goods Code (IMDG Code), Incorporating Amendment 39-18 (English Edition), Volumes 1 and 2, 2018 Edition, copyright 2018, into §§171.22; 171.23; 171.25; 172.101; 172.202; 172.203 172.401; 172.407; 172.502; 172.519; 172.602; 173.21; 173.56; 176.2; 176.5; 176.11; 176.27; 176.30; 176.83; 176.84; 176.140; 176.720; 176.906; 178.3; 178.274.

(w) International Organization for Standardization, Case Postale 56, CH-1211, Geneve 20, Switzerland, http://www.iso.org. Also available from: ANSI 25, West 43rd Street, New York, NY 10036, 1-212-642-4900, http://www.ansi.org.

(1) ISO 535-1991(E) Paper and board—Determination of water absorptiveness—Cobb method, 1991, into §§178.707; 178.708; 178.516.

(2) ISO 1496-1: 1990 (E)—Series 1 freight containers—Specification and testing, Part 1: General cargo containers. Fifth Edition, (August 15, 1990), into §173.411.

(3) ISO 1496-3(E)—Series 1 freight containers—Specification and testing—Part 3: Tank containers for liquids, gases and pressurized dry bulk, Fourth edition, March 1995, into §§178.74; 178.75; 178.274.

(4) ISO 1516:2002(E), Determination of flash/no flash—Closed cup equilibrium method, Third Edition, 2002-03-01, into §173.120.

(5) ISO 1523:2002(E), Determination of flash point—Closed cup equilibrium method, Third Edition, 2002-03-01, into §173.120.

(6) ISO 2431-1984(E) Standard Cup Method, 1984, into §173.121.

(7) ISO 2592:2000(E), Determination of flash and fire points—Cleveland open cup method, Second Edition, 2000-09-15, into §173.120.

(8) ISO 2719:2002(E), Determination of flash point—Pensky-Martens closed cup method, Third Edition, 2002-11-15, into §173.120.

(9) ISO 2919:1999(E), Radiation Protection—Sealed radioactive sources—General requirements and classification, (ISO 2919), second edition, February 15, 1999, into §173.469.

(10) ISO 3036-1975(E) Board—Determination of puncture resistance, 1975, into §178.708.

(11) ISO 3405:2000(E), Petroleum products—Determination of distillation characteristics at atmospheric pressure, Third Edition, 2000-03-01, into §173.121.

(12) ISO 3574-1986(E) Cold-reduced carbon steel sheet of commercial and drawing qualities, into §178.503; part 178, appendix C.

(13) ISO 3679:2004(E), Determination of flash point—Rapid equilibrium closed cup method, Third Edition, 2004-04-01, into §173.120.

(14) ISO 3680:2004(E), Determination of flash/no flash—Rapid equilibrium closed cup method, Fourth Edition, 2004-04-01, into §173.120.

(15) ISO 3807-2(E), Cylinders for acetylene—Basic requirements—Part 2: Cylinders with fusible plugs, First edition, March 2000, into §§173.303; 178.71.

(16) ISO 3807:2013(E), Gas cylinders—Acetylene cylinders—Basic requirements and type testing, Second edition, 2013-09-01, into §§173.303; 178.71.

(17) ISO 3924:1999(E), Petroleum products—Determination of boiling range distribution—Gas chromatography method, Second Edition, 1999-08-01, into §173.121.

(18) ISO 4126-1:2004(E): Safety devices for protection against excessive pressure—Part 1: Safety valves, Second edition 2004-02-15, into §178.274.

(19) ISO 4126-7:2004(E): Safety devices for protection against excessive pressure—Part 7: Common data, First Edition 2004-02-15 into §178.274.

(20) ISO 4126-7:2004/Cor.1:2006(E): Safety devices for protection against excessive pressure—Part 7: Common data, Technical Corrigendum 1, 2006-11-01, into §178.274.

(21) ISO 4626:1980(E), Volatile organic liquids—Determination of boiling range of organic solvents used as raw materials, First Edition, 1980-03-01, into §173.121.

(22) ISO 4706:2008(E), Gas cylinders—Refillable welded steel cylinders—Test pressure 60 bar and below, First Edition, 2008-07-014, Corrected Version, 2008-07-01, into §178.71.

(23) ISO 6406(E), Gas cylinders—Seamless steel gas cylinders—Periodic inspection and testing, Second edition, February 2005, into §180.207.

(24) ISO 6892 Metallic materials—Tensile testing, July 15, 1984, First Edition, into §178.274.

(25) ISO 7225(E), Gas cylinders—Precautionary labels, Second Edition, July 2005, into §178.71.

(26) ISO 7866(E), Gas cylinders—Refillable seamless aluminum alloy gas cylinders—Design, construction and testing, First edition, June 1999, into §178.71.

(27) ISO 7866:2012(E), Gas cylinders—Refillable seamless aluminium alloy gas cylinders—Design, construction and testing, Second edition, 2012-09-01, into §178.71.

(28) ISO 7866:2012/Cor.1:2014(E), Gas cylinders — Refillable seamless aluminium alloy gas cylinders — Design, construction and testing, Technical Corrigendum 1, 2014-04-15, into §178.71.

(29) ISO 8115 Cotton bales—Dimensions and density, 1986 Edition, into §172.102.

(30) ISO 9809-1:1999(E): Gas cylinders—Refillable seamless steel gas cylinders—Design, construction and testing—Part 1: Quenched and tempered steel cylinders with tensile strength less than 1100 MPa., First edition, June 1999, into §§178.37; 178.71; 178.75.

(31) ISO 9809-1:2010(E): Gas cylinders—Refillable seamless steel gas cylinders—Design, construction and testing—Part 1: Quenched and tempered steel cylinders with tensile strength less than 1 100 MPa., Second edition, 2010-04-15, into §§178.37; 178.71; 178.75.

(32) ISO 9809-2:2000(E): Gas cylinders—Refillable seamless steel gas cylinders—Design, construction and testing—Part 2: Quenched and tempered steel cylinders with tensile strength greater than or equal to 1 100 MPa., First edition, June 2000, into §§178.71; 178.75.

(33) ISO 9809-2:2010(E): Gas cylinders—Refillable seamless steel gas cylinders—Design, construction and testing—Part 2: Quenched and tempered steel cylinders with tensile strength greater than or equal to 1100 MPa., Second edition, 2010-04-15, into §§178.71; 178.75.

(34) ISO 9809-3:2000(E): Gas cylinders—Refillable seamless steel gas cylinders—Design, construction and testing—Part 3: Normalized steel cylinders, First edition, December 2000, into §§178.71; 178.75.

(35) ISO 9809-3:2010(E): Gas cylinders—Refillable seamless steel gas cylinders—Design, construction and testing—Part 3: Normalized steel cylinders, Second edition, 2010-04-15, into §§178.71; 178.75.

(36) ISO 9809-4:2014(E), Gas cylinders—Refillable seamless steel gas cylinders—Design, construction and testing—Part 4: Stainless steel cylinders with an Rm value of less than 1 100 MPa, First edition, 2014-07-15, into §§178.71; 178.75.

(37) ISO 9978:1992(E)—Radiation protection—Sealed radioactive sources—Leakage test methods. First Edition, (February 15, 1992), into §173.469.

(38) ISO 10156:2010(E): Gases and gas mixtures—Determination of fire potential and oxidizing ability for the selection of cylinder valve outlets, Third edition, 2010-04-01, into §173.115.

(39) ISO 10156:2010/Cor.1:2010(E): Gases and gas mixtures—Determination of fire potential and oxidizing ability for the selection of cylinder valve outlets, Technical Corrigendum 1, 2010-09-01, into §173.115.

(40) ISO 10297:1999(E), Gas cylinders—Refillable gas cylinder valves—Specification and type testing, First Edition, 1995-05-01, into §§173.301b; 178.71.

(41) ISO 10297:2006(E), Transportable gas cylinders—Cylinder valves—Specification and type testing, Second Edition, 2006-01-15, into §§173.301b; 178.71.

(42) ISO 10297:2014(E), Gas cylinders—Cylinder valves—Specification and type testing, Third Edition, 20014-07-15, into §§173.301b; 178.71.

(43) ISO 10461:2005(E), Gas cylinders—Seamless aluminum-alloy gas cylinders—Periodic inspection and testing, Second Edition, 2005-02-15 and Amendment 1, 2006-07-15, into §180.207.

(44) ISO 10462 (E), Gas cylinders—Transportable cylinders for dissolved acetylene—Periodic inspection and maintenance, Second edition, February 2005, into §180.207.

(45) ISO 10462:2013(E), Gas cylinders—Acetylene cylinders—Periodic inspection and maintenance, Third edition, 2013-12-15, into §180.207.

(46) ISO 10692-2:2001(E), Gas cylinders—Gas cylinder valve connections for use in the micro-electronics industry—Part 2: Specification and type testing for valve to cylinder connections, First Edition, 2001-08-01, into §§173.40; 173.302c.

(47) ISO 11114-1:2012(E), Gas cylinders—Compatibility of cylinder and valve materials with gas contents—Part 1: Metallic materials, Second edition, 2012-03-15, into §§172.102; 173.301b; 178.71.

(48) ISO 11114-2:2013(E), Gas cylinders—Compatibility of cylinder and valve materials with gas contents—Part 2: Non-metallic materials, Second edition, 2013-04-01, into §§173.301b; 178.71.

(49) ISO 11117:1998(E): Gas cylinders—Valve protection caps and valve guards for industrial and medical gas cylinders.—Design, construction and tests, First edition, 1998-08-01, into §173.301b.

(50) ISO 11117:2008(E): Gas cylinders—Valve protection caps and valve guards—Design, construction and tests, Second edition, 2008-09-01, into §173.301b.

(51) ISO 11117:2008/Cor.1:2009(E): Gas cylinders—Valve protection caps and valve guards—Design, construction and tests, Technical Corrigendum 1, 2009-05-01, into §173.301b.

(52) ISO 11118(E), Gas cylinders—Non-refillable metallic gas cylinders—Specification and test methods, First edition, October 1999, into §178.71.

(53) ISO 11118:2015(E), Gas cylinders—Non-refillable metallic gas cylinders—Specification and test methods, Second edition, 2015-09-15, into §§173.301b; 178.71.

(54) ISO 11119-1(E), Gas cylinders—Gas cylinders of composite construction—Specification and test methods—Part 1: Hoop-wrapped composite gas cylinders, First edition, May 2002, into §178.71.

(55) ISO 11119-1:2012(E), Gas cylinders—Refillable composite gas cylinders and tubes—Design, construction and testing— Part 1: Hoop wrapped fibre reinforced composite gas cylinders and tubes up to 450 l, Second edition, 2012-08-01, into §178.71.

(56) ISO 11119-2(E), Gas cylinders—Gas cylinders of composite construction—Specification and test methods—Part 2: Fully wrapped fibre reinforced composite gas cylinders with load-sharing metal liners, First edition, May 2002, into §178.71.

(57) ISO 11119-2:2012(E), Gas cylinders—Refillable composite gas cylinders and tubes—Design, construction and testing—Part 2: Fully wrapped fibre reinforced composite gas cylinders and tubes up to 450 l with load-sharing metal liners, Second edition, 2012-07-15, into §178.71.

(58) ISO 11119-2:2012/Amd.1:2014(E), Gas cylinders—Refillable composite gas cylinders and tubes—Design, construction and testing—Part 2: Fully wrapped fibre reinforced composite gas cylinders and tubes up to 450 l with load-sharing metal liners, Amendment 1, 2014-08-15, into §178.71.

(59) ISO 11119-3(E), Gas cylinders of composite construction—Specification and test methods—Part 3: Fully wrapped fibre reinforced composite gas cylinders with non-load-sharing metallic or non-metallic liners, First edition, September 2002, into §178.71.

(60) ISO 11119-3:2013(E), Gas cylinders— Refillable composite gas cylinders and tubes—Design, construction and testing—Part 3: Fully wrapped fibre reinforced composite gas cylinders and tubes up to 450 l with non-load-sharing metallic or non-metallic liners, Second edition, 2013-04-15, into §178.71.

(61) ISO 11120(E), Gas cylinders—Refillable seamless steel tubes of water capacity between 150 L and 3000 L—Design, construction and testing, First edition, March 1999, into §§178.71; 178.75.

(62) ISO 11120:2015(E), Gas cylinders—Refillable seamless steel tubes of water capacity between 150 l and 3000 l—Design, construction and testing, Second Edition, 2015-02-01, into §§178.71; 178.75.

(63) ISO 11513:2011(E), Gas cylinders—Refillable welded steel cylinders containing materials for sub-atmospheric gas packaging (excluding acetylene)—Design, construction, testing, use and periodic inspection, First edition, 2011-09-12, into §§173.302c; 178.71; 180.207.

(64) ISO 11621(E), Gas cylinders—Procedures for change of gas service, First edition, April 1997, into §§173.302, 173.336, 173.337.

(65) ISO 11623(E), Transportable gas cylinders—Periodic inspection and testing of composite gas cylinders, First edition, March 2002, into §180.207.

(66) ISO 11623:2015(E), Gas cylinders—Composite construction—Periodic inspection and testing, Second edition, 2015-12-01, into §180.207.

(67) ISO 13340:2001(E) Transportable gas cylinders—Cylinder valves for non-refillable cylinders—Specification and prototype testing, First edition, 2004-04-01, into §§173.301b; 178.71.

(68) ISO 13736:2008(E), Determination of flash point—Abel closed-cup method, Second Edition, 2008-09-15, into §173.120.

(69) [Reserved]

(70) ISO 16111:2008(E), Transportable gas storage devices—Hydrogen absorbed in reversible metal hydride, First Edition, 2008-11-15, into §§173.301b; 173.311; 178.71.

(71) ISO 16148:2016(E), Gas cylinders—Refillable seamless steel gas cylinders and tubes—Acoustic emission examination (AT) and follow-up ultrasonic examination (UT) for periodic inspection and testing, Second Edition, 2016-04-15, into §180.207.

(72) ISO 17871:2015(E), Gas cylinders—Quick-release cylinder valves—Specification and type testing, First Edition, 2015-08-15, into 173.301b.

(73) ISO 18172-1:2007(E), Gas cylinders—Refillable welded stainless steel cylinders—Part 1: Test pressure 6 MPa and below, First Edition, 2007-03-01, into §178.71.

(74) ISO 20703:2006(E), Gas cylinders—Refillable welded aluminum-alloy cylinders—Design, construction and testing, First Edition, 2006-05-01, into §178.71.

(75) ISO 21172-1:2015(E), Gas cylinders—Welded steel pressure drums up to 3 000 litres capacity for the transport of gases—Design and construction—Part 1: Capacities up to 1 000 litres, First edition, 2015-04-01, into §178.71.

(76) ISO 22434:2006(E), Transportable gas cylinders—Inspection and maintenance of cylinder valves, First Edition, 2006-09-01, into §180.207.

(77) ISO/TR 11364:2012(E), Gas cylinders—Compilation of national and international valve stem/gas cylinder neck threads and their identification and marking system, First Edition, 2012-12-01, into §178.71.

(x) National Board of Boiler and Pressure Vessel Inspectors, 1055 Crupper Avenue, Columbus, Ohio 43229.

(1) NB-23, National Board Inspection Code, A Manual for Boiler and Pressure Vessel Inspectors, 1992 Edition, into §180.413.

(2) [Reserved]

(y) National Fire Protection Association, 1 Batterymarch Park, Quincy, MA, 02169-7471 1-617-770-3000, http://www.nfpa.org.

(1) NFPA 58-Liquefied Petroleum Gas Code, 2001 Edition, into §§173.5, 173.315, 173.301(a)(11).

(2) NFPA 498-Standards for Safe Havens and Interchange Lots for Vehicles Transporting Explosives, 2010 Edition, into §177.835.

(z) National Institute of Standards and Technology, Department of Commerce, 5285 Port Royal Road, Springfield, VA 22151.

(1) USDC, NBS Handbook H-28 (1957), 1957 Handbook of Screw-Thread Standards for Federal Services, December 1966 Edition, into §§179.2; 178.45; 178.46.

(2) [Reserved]

(aa) Organization for Economic Cooperation and Development (OECD), OECD Publications and Information Center, 2001 L Street, N.W., Suite 700, Washington, DC 20036.

(1) Test No. 404: Acute Dermal Irritation/Corrosion, OECD Guidelines for the Testing of Chemicals, adopted 28 July 2015, into §173.137.

(2) Test No. 430: In Vitro Skin Corrosion: Transcutaneous Electrical Resistance Test (TER), OECD Guidelines for the Testing of Chemicals, adopted 28 July 2015, into §173.137.

(3) Test No. 431: In Vitro Skin Corrosion: Reconstructed Human Epidermis (RHE) Test Method, OECD Guidelines for the Testing of Chemicals, adopted 28 July 2015, into §173.137.

(4) Test No. 435: In Vitro Membrane Barrier Test Method for Skin Corrosion, OECD Guidelines for the Testing of Chemicals, adopted 28 July 2015, into §173.137.

(bb) Transport Canada, Transport Dangerous Goods. Mailstop: ASD 330 Sparks Street, Ottawa, Ontario, Canada K1A 0N5, 416-973-1868, http://www.tc.gc.ca.

(1) Transportation of Dangerous Goods Regulations (Transport Canada TDG Regulations), into §§107.801; 107.805; 171.12; 171.22; 171.23; 172.401; 172.407; 172.502; 172.519; 172.602; 173.31; 173.32; 173.33; 173.301; 180.205; 180.211; 180.212; 180.413.

(i) SOR 2001-286, including Clear Language Amendments, August 2001.

(ii) SOR/2002-306 August 8, 2002.

(iii) SOR/2003-273 July 24, 2003

(iv) SOR/2003-400 December 3, 2003

(v) SOR/2005-216 July 13, 2005

(vi) SOR/2005-279 September 21, 2005

(vii) SOR/2008-34 February 7, 2008

(viii) SOR/2007-179 July 31, 2007

(ix) SOR/2011-239 November 9, 2011.

(x) SOR/2011-60 March 16, 2011.

(xi) SOR/2011-210 October 12, 2011.

(xii) SOR/2012-245 December 5, 2012.

(xiii) SOR/2014-152 July 2, 2014.

(xiv) SOR/2014-159 July 2, 2014.

(xv) SOR/2014-159 Erratum July 16, 2014.

(xvi) SOR/2014-152 Erratum August 27, 2014.

(xvii) SOR/2014-306 December 31, 2014.

(xviii) SOR/2014-306 Erratum January 28, 2015.

(xix) SOR/2015-100 May 20, 2015.

(xx) SOR/2016-95 June 1, 2016;

(xxi) SOR/2017-137 July 12, 2017.

(xxii) SOR/2017-253 December 13, 2017.

(2) Containers for Transport of Dangerous Goods by Rail, TP 14877E, 12/2013, into §171.12.

(cc) Truck Trailer Manufacturers Association, 1020 Princess Street, Alexandria, Virginia 22314.

(1) TTMA RP No. 61-98, Performance of manhole and/or Fill Opening Assemblies on MC 306, DOT 406, Non-ASME MC 312 and Non-ASME DOT 412 Cargo Tanks, June 1, 1998, into §180.405.

(2) TTMA RP No. 81-97, Performance of Spring Loaded Pressure Relief Valves on MC 306, MC 307, MC 312, DOT 406, DOT 407, and DOT 412 Tanks, July 1, 1997 Edition, into §§178.345-10; 178.346-3.

(3) TTMA TB No. 107, Procedure for Testing In-Service Unmarked and/or Uncertified MC 306 and Non-ASME MC 312 Type Cargo Tank Manhole Covers, June 1, 1998 Edition, into §180.405.

(dd) United Nations, Bookshop, GA-1B-103, New York, NY 10017, 1-212-963-7680, https://shop.un.org or bookshop@un.org.

(1) UN Recommendations on the Transport of Dangerous Goods, Model Regulations (UN Recommendations), 20th revised edition, Volumes I and II, ST/SG/AC.10/1/Rev.20(Vol.I) and (Vol.II), (2017), into §§171.8; 171.12; 172.202; 172.401; 172.407; 172.502; 172.519; 173.22; 173.24; 173.24b; 173.40; 173.56; 173.192; 173.302b; 173.304b; 178.75; 178.274.

(2) UN Recommendations on the Transport of Dangerous Goods, Manual of Tests and Criteria, (Manual of Tests and Criteria), into §§171.24, 172.102; 173.21; 173.56; 173.57; 173.58; 173.60; 173.115; 173.124; 173.125; 173.127; 173.128; 173.137; 173.185; 173.220; 173.221; 173.224; 173.225; 173.232; part 173, appendix H; 175.10; 176.905; 178.274:

(i) Sixth Revised Edition (2015);

(ii) Sixth Revised Edition, Amendment 1, ST/SG/AC.10/11/Rev.6/.Amend.1 (2017).

(3) Globally Harmonized System of Classification and Labelling of Chemicals (GHS), Seventh Revised Edition, ST/SG/AC.10/30/Rev.7 (2017), into §172.401.

[78 FR 1027, Jan. 7, 2013, as amended at 78 FR 15321, Mar. 11, 2013; 78 FR 65468, Oct. 31, 2013; 79 FR 15043, Mar. 18, 2014; 79 FR 40609, July 11, 2014; 80 FR 1114, Jan. 8, 2015; 80 FR 26746, May 8, 2015; 80 FR 79449, Dec. 21, 2015; 81 FR 25617, Apr. 29, 2016; 81 FR 35513, June 2, 2016; 82 FR 15833, Mar. 30, 2017; 83 FR 55806, Nov. 7, 2018; 84 FR 6952, Feb. 28, 2019; 85 FR 27852, May 11, 2020]