A motor vehicle safety standard prescribed under this chapter may not require a manufacturer to comply with the standard by using a safety belt interlock designed to prevent starting or operating a motor vehicle if an occupant is not using a safety belt.
Open Table
Revised Section |
Source (U.S. Code) | Source (Statutes at Large) |
---|---|---|
30124 | 15:1410b. | Sept. 9, 1966, Pub. L. 89–563, 80 Stat. 718, §125; added Oct. 27, 1974, Pub. L. 93–492, §109, 88 Stat. 1482. |
The text of 15:1410b(a) and (c)–(e) is omitted as obsolete. The text of 15:1410b(b)(2) and (3) and (f)(2) and (3) is omitted as unnecessary because of the restatement. The words "After the effective date of the amendment prescribed under subsection (a) of this section" are omitted as executed. The words "prescribed under this chapter" are substituted for "Federal" for consistency in this chapter.
Amendments
2012—Pub. L. 112–141 amended section generally. Prior to amendment, text read as follows: "A motor vehicle safety standard prescribed under this chapter may not require or allow a manufacturer to comply with the standard by using a safety belt interlock designed to prevent starting or operating a motor vehicle if an occupant is not using a safety belt or a buzzer designed to indicate a safety belt is not in use, except a buzzer that operates only during the 8-second period after the ignition is turned to the 'start' or 'on' position."
Effective Date of 2012 Amendment
Amendment by Pub. L. 112–141 effective Oct. 1, 2012, see section 3(a) of Pub. L. 112–141, set out as an Effective and Termination Dates of 2012 Amendment note under section 101 of Title 23, Highways.