Provide the information specified in Sections A through G for each technical report prepared under this appendix. Provide the resource assessment under Section C that is applicable to the project.

Section A—Qualifications of the Project Team. Describe the project team, their professional credentials, and relevant experience. The description shall support that the project team key service providers have the necessary professional credentials, licenses, certifications, and relevant experience to develop the proposed project.

Section B—Agreements and Permits. Describe the necessary agreements and permits (including any for local zoning requirements) required for the project and the anticipated schedule for securing those agreements and permits. For example, Interconnection Agreements and Power Purchase Agreements are necessary for all Renewable Energy projects electrically interconnected to the utility grid.?>

Section C—Resource Assessment. Describe the quality and availability of the renewable resource and the amount of Renewable Energy generated through the deployment of the proposed system. For all Bioenergy Projects, except Anaerobic Digesters Projects, complete Section C.3 of this appendix. For Anaerobic Digester Projects, complete Section C.6 of this appendix.

1. Wind. Provide adequate and appropriate data to demonstrate the amount of renewable resource available. Indicate the source of the wind data and the conditions of the wind monitoring when collected at the site or assumptions made when applying nearby wind data to the site.

2. Solar. Provide adequate and appropriate data to demonstrate the amount of renewable resource available. Indicate the source of the solar data and assumptions.

3. Bioenergy Project. Provide adequate and appropriate data to demonstrate the amount of renewable resource available. Indicate the type, quantity, quality, and seasonality of the Renewable Biomass resource, including harvest and storage, where applicable. Where applicable, also indicate shipping or receiving method and required infrastructure for shipping. For proposed projects with an established resource, provide a summary of the resource. Document that any and all woody biomass feedstock from National Forest System land or public lands cannot be used as a higher value wood-based product.

4. Geothermal Electric Generation. Provide adequate and appropriate data to demonstrate the amount of renewable resource available. Indicate the quality of the geothermal resource, including temperature, flow, and sustainability and what conversion system is to be installed. Describe any special handling of cooled geothermal waters that may be necessary. Describe the process for determining the geothermal resource, including measurement setup for the collection of the geothermal resource data. For proposed projects with an established resource, provide a summary of the resource and the specifications of the measurement setup.

5. Geothermal Direct Generation. Provide adequate and appropriate data to demonstrate the amount of renewable resource available. Indicate the quality of the geothermal resource, including temperature, flow, and sustainability and what direct use system is to be installed. Describe any special handling of cooled geothermal waters that may be necessary. Describe the process for determining the geothermal resource, including measurement setup for the collection of the geothermal resource data. For proposed projects with an established resource, provide a summary of the resource and the specifications of the measurement setup.

6. Anaerobic Digester Project. Provide adequate and appropriate data to demonstrate the amount of renewable resource available. Indicate the substrates used as digester inputs, including animal wastes or other Renewable Biomass in terms of type, quantity, seasonality, and frequency of collection. Describe any special handling of feedstock that may be necessary. Describe the process for determining the feedstock resource. Provide either tabular values or laboratory analysis of representative samples that include biodegradability studies to produce gas production estimates for the project on daily, monthly, and seasonal basis.

7. Hydrogen Project. Provide adequate and appropriate data to demonstrate the amount of renewable resource available. Indicate the type, quantity, quality, and seasonality of the Renewable Biomass resource. For solar, wind, or geothermal sources of energy used to generate hydrogen, indicate the renewable resource where the hydrogen system is to be installed. Local resource maps may be used as an acceptable preliminary source of renewable resource data. For proposed projects with an established renewable resource, provide a summary of the resource.

8. Hydroelectric/Ocean Energy Projects. Provide adequate and appropriate data to demonstrate the amount of renewable resource available. Indicate the quality of the resource, including temperature (if applicable), flow, and sustainability of the resource, including a summary of the resource evaluation process and the specifications of the measurement setup and the date and duration of the evaluation process and proximity to the proposed site. If less than 1 year of data is used, a Qualified Consultant must provide a detailed analysis of the correlation between the site data and a nearby, long-term measurement site.

Section D—Design and Engineering. Describe the intended purpose of the project and the design, engineering, testing, and monitoring needed for the proposed project. The description shall support that the system will be designed, engineered, tested, and monitored so as to meet its intended purpose, ensure public safety, and comply with applicable laws, regulations, agreements, permits, codes, and standards. In addition, identify that all major equipment is Commercially Available, including proprietary equipment, and justify how this unique equipment is needed to meet the requirements of the proposed design. In addition, information regarding component warranties and the availability of spare parts must be presented.

Section E—Project Development. Describe the overall project development method, including the key project development activities and the proposed schedule, including proposed dates for each activity. The description shall identify each significant historical and projected activity, its beginning and end, and its relationship to the time needed to initiate and carry the activity through to successful project completion. The description shall address Applicant project development cash flow requirements. Details for equipment procurement and installation shall be addressed in Section F of this appendix.

Section F—Equipment Procurement and Installation. Describe the availability of the equipment required by the system. The description shall support that the required equipment is available and can be procured and delivered within the proposed project development schedule. Describe the plan for site development and system installation, including any special equipment requirements. In all cases, the system or improvement shall be installed in conformance with manufacturer's specifications and design requirements, and comply with applicable laws, regulations, agreements, permits, codes, and standards.

Section G—Operations and Maintenance. Describe the operations and maintenance requirements of the system, including major rebuilds and component replacements necessary for the system to operate as designed over its useful life. The warranty must cover and provide protection against both breakdown and a degradation of performance. The performance of the RES or EEI shall be monitored and recorded as appropriate to the specific technology.