AGENCY:
Federal Aviation Administration (FAA), DOT.
ACTION:
Final rule.
SUMMARY:
This action removes Class E airspace extending upward from 700 feet above the surface at Chase Field Industrial Airport, Beeville-Chase Field, TX. This action is due to the cancellation of the instrument procedures at the airport making this airspace no longer necessary.
DATES:
Effective 0901 UTC, April 25, 2019. The Director of the Federal Register approves this incorporation by reference action under Title 1 Code of Federal Regulations part 51, subject to the annual revision of FAA Order 7400.11 and publication of conforming amendments.
ADDRESSES:
FAA Order 7400.11C, Airspace Designations and Reporting Points, and subsequent amendments can be viewed online at http://www.faa.gov/air_traffic/publications/. For further information, you can contact the Airspace Policy Group, Federal Aviation Administration, 800 Independence Avenue SW, Washington, DC 20591; telephone: (202) 267-8783. The Order is also available for inspection at the National Archives and Records Administration (NARA). For information on the availability of FAA Order 7400.11C at NARA, call (202) 741-6030, or go to https://www.archives.gov/federal-register/cfr/ibr-locations.html.
FAA Order 7400.11, Airspace Designations and Reporting Points, is published yearly and effective on September 15.
FOR FURTHER INFORMATION CONTACT:
Rebecca Shelby, Federal Aviation Administration, Operations Support Group, Central Service Center, 10101 Hillwood Parkway, Fort Worth, TX 76177; telephone (817) 222-5857.
SUPPLEMENTARY INFORMATION:
Authority for This Rulemaking
The FAA's authority to issue rules regarding aviation safety is found in Title 49 of the United States Code. Subtitle I, Section 106 describes the authority of the FAA Administrator. Subtitle VII, Aviation Programs, describes in more detail the scope of the agency's authority. This rulemaking is promulgated under the authority described in Subtitle VII, Part A, Subpart I, Section 40103. Under that section, the FAA is charged with prescribing regulations to assign the use of airspace necessary to ensure the safety of aircraft and the efficient use of airspace. This regulation is within the scope of that authority as it supports the removal of Class E airspace extending upward from 700 feet above the surface at Chase Field Industrial Airport, Beeville-Chase Field, TX.
History
The FAA published a notice of proposed rulemaking in the Federal Register (83 FR 55306; November 5, 2018) for Docket No. FAA-2018-0917 to remove Class E airspace extending upward from 700 feet above the surface at Chase Field Industrial Airport, Beeville-Chase Field, TX. Interested parties were invited to participate in this rulemaking effort by submitting written comments on the proposal to the FAA. No comments were received.
Class E airspace designations are published in paragraphs 6005 of FAA Order 7400.11C, dated August 13, 2018, and effective September 15, 2018, which is incorporated by reference in 14 CFR 71.1. The Class E airspace designations listed in this document will be published subsequently in the Order.
Availability and Summary of Documents for Incorporation by Reference
This document amends FAA Order 7400.11C, Airspace Designations and Reporting Points, dated August 13, 2018, and effective September 15, 2018. FAA Order 7400.11C is publicly available as listed in the ADDRESSES section of this document. FAA Order 7400.11C lists Class A, B, C, D, and E airspace areas, air traffic service routes, and reporting points.
The Rule
This amendment to Title 14 Code of Federal Regulations (14 CFR) part 71 removes the Class E airspace extending upward from 700 feet above the surface at Chase Field Industrial Airport, Beeville-Chase Field, TX.
This action due to the cancellation of the instrument procedures at the airport making the airspace no longer necessary.
Regulatory Notices and Analyses
The FAA has determined that this regulation only involves an established body of technical regulations for which frequent and routine amendments are necessary to keep them operationally current, is non-controversial and unlikely to result in adverse or negative comments. It, therefore: (1) Is not a “significant regulatory action” under Executive Order 12866; (2) is not a “significant rule” under DOT Regulatory Policies and Procedures (44 FR 11034; February 26, 1979); and (3) does not warrant preparation of a regulatory evaluation as the anticipated impact is so minimal. Since this is a routine matter that only affects air traffic procedures and air navigation, it is certified that this rule, when promulgated, does not have a significant economic impact on a substantial number of small entities under the criteria of the Regulatory Flexibility Act.
Environmental Review
The FAA has determined that this action qualifies for categorical exclusion under the National Environmental Policy Act in accordance with FAA Order 1050.1F, “Environmental Impacts: Policies and Procedures,” paragraph 5-6.5.a. This airspace action is not expected to cause any potentially significant environmental impacts, and no extraordinary circumstances exist that warrant preparation of an environmental assessment.
Lists of Subjects in 14 CFR Part 71
- Airspace
- Incorporation by reference
- Navigation (air)
Adoption of the Amendment
In consideration of the foregoing, the Federal Aviation Administration amends 14 CFR part 71 as follows:
PART 71—DESIGNATION OF CLASS A, B, C, D, AND E AIRSPACE AREAS; AIR TRAFFIC SERVICE ROUTES; AND REPORTING POINTS
1. The authority citation for part 71 continues to read as follows:
2. The incorporation by reference in 14 CFR 71.1 of FAA Order 7400.11C, Airspace Designations and Reporting Points dated August 13, 2018, and effective September 15, 2018, is amended as follows:
Paragraph 6005 Class E Airspace Areas Extending Upward From 700 Feet or More Above the Surface of the Earth.
ASW TX E5 Beeville-Chase Field, TX [Removed]
Issued in Fort Worth, Texas, on March 1, 2019.
John A. Witucki,
Acting Manager, Operations Support Group, ATO Central Service Center.
[FR Doc. 2019-04154 Filed 3-7-19; 8:45 am]
BILLING CODE 4910-13-P