You must submit the following information about your spill control and emergency preparedness plan. You may use a spill prevention control and countermeasure (SPCC) plan prepared under 40 CFR part 112 if the plan includes all of the information required by this section. You must submit:

(a) A list of names, addresses, and telephone numbers of persons that the Superintendent can contact in the event of a spill, fire, or accident, including the order in which the persons should be contacted;

(b) Your reporting procedures in the event of a spill, fire, or accident;

(c) Identification of contaminating or toxic substances expected to be used within your area of operations;

(d) Identification of abnormal pressure, temperature, toxic gases or substances, or other hazardous conditions expected to be encountered during operations;

(e) Measures (e.g., procedures, facility design, equipment) to minimize risks to human health and safety and the environment;

(f) Steps to prevent conditions creating fire hazards in the vicinity of well locations and lease tanks;

(g) List of equipment and methods for containment and cleanup of contaminating substances, including a list of the equipment to be maintained on site as well as a list of equipment to be available from local contractors;

(h) A storm water drainage plan and actions intended to mitigate storm water runoff;

(i) Safety data sheets for each material expected to be used or encountered during operations, including quantities expected to be maintained at your area of operations;

(j) A description of the emergency actions you will take in the event of accidents causing human injury; and

(k) Contingency plans for relevant conditions and emergencies other than spills, based on the particular geographic area, such as hurricanes, flooding, tornadoes, or earthquakes.