(a) Parameters or pollutants, for which methods are approved, are listed together with test procedure descriptions and references in Tables IA, IB, IC, ID, IE, IF, IG, and IH of this section. The methods listed in Tables IA, IB, IC, ID, IE, IF, IG, and IH are incorporated by reference, see paragraph (b) of this section, with the exception of EPA Methods 200.7, 601-613, 624.1, 625.1, 1613, 1624, and 1625. The full texts of Methods 601-613, 624.1, 625.1, 1613, 1624, and 1625 are printed in appendix A of this part, and the full text of Method 200.7 is printed in appendix C of this part. The full text for determining the method detection limit when using the test procedures is given in appendix B of this part. In the event of a conflict between the reporting requirements of 40 CFR parts 122 and 125 and any reporting requirements associated with the methods listed in these tables, the provisions of 40 CFR parts 122 and 125 are controlling and will determine a permittee's reporting requirements. The full texts of the referenced test procedures are incorporated by reference into Tables IA, IB, IC, ID, IE, IF, IG, and IH. The year after the method number indicates the latest editorial change of the method. The discharge parameter values for which reports are required must be determined by one of the standard analytical test procedures incorporated by reference and described in Tables IA, IB, IC, ID, IE, IF, IG, and IH or by any alternate test procedure which has been approved by the Administrator under the provisions of paragraph (d) of this section and §§136.4 and 136.5. Under certain circumstances (paragraph (c) of this section, in §136.5(a) through (d) or 40 CFR 401.13) other additional or alternate test procedures may be used.

Table IA—List of Approved Biological Methods for Wastewater and Sewage Sludge

Open Table
Parameter and units Method1 EPA Standard methods AOAC, ASTM, USGS Other
Bacteria
1. Coliform (fecal), number per 100 mL or number per gram dry weight Most Probable Number (MPN), 5 tube, 3 dilution, or p. 132,3 1680,11 15 168111 20 9221 C E-2006
    Multiple tube/multiple well, or Colilert-18®13 18 21 29.
Membrane filter (MF)2, single step p. 1243 9222 D-200630 B-0050-854
2. Coliform (fecal) in presence of chlorine, number per 100 mL MPN, 5 tube, 3 dilution, or p. 1323 9221 C E-2006
MF2, single step5 p. 1243 9222 D-200630
3. Coliform (total), number per 100 mL MPN, 5 tube, 3 dilution, or p. 1143 9221 B-2006
MF2, single step or two step p. 1083 9222 B-2006 B-0025-854
4. Coliform (total), in presence of chlorine, number per 100 mL MPN, 5 tube, 3 dilution, or p. 1143 9221 B-2006
MF2 with enrichment5 p. 1113 9222 B-2006
5. E. coli, number per 100 mL21 MPN6 8 16 multiple tube, or 9221B.2-2006/9221F-200612 14
multiple tube/multiple well, or 9223 B-200413 991.1510 Colilert® 13 18.
Colilert-18® 13 17 18
MF2 6 7 8 single step 160322 mColiBlue-24®19.
6. Fecal streptococci, number per 100 mL MPN, 5 tube, 3 dilution, or p. 1393 9230 B-2007
MF2, or p. 1363 9230 C-2007 B-0055-854
Plate count p. 1433
7. Enterococci, number per 100 mL21 MPN, 5 tube, 3 dilution, or p. 1393 9230 B-2007
MPN6 8, multiple tube/multiple well, or 9230 D-2007 D6503-999 Enterolert® 13 24.
MF2 6 7 8 single step or 160025 9230 C-2007
Plate count p. 1433
8.Salmonella number per gram dry weight11 MPN multiple tube 168223
Aquatic Toxicity
9. Toxicity, acute, fresh water organisms, LC50, percent effluent Ceriodaphnia dubia acute 2002.026
Daphnia puplex and Daphnia magna acute 2021.026
Fathead Minnow, Pimephales promelas, and Bannerfin shiner, Cyprinella leedsi, acute 2000.026
Rainbow Trout, Oncorhynchus mykiss, and brook trout, Salvelinus fontinalis, acute 2019.026
10. Toxicity, acute, estuarine and marine organisms of the Atlantic Ocean and Gulf of Mexico, LC50, percent effluent Mysid, Mysidopsis bahia, acute 2007.026
Sheepshead Minnow, Cyprinodon variegatus, acute 2004.026
Silverside, Menidia beryllina, Menidia menidia, and Menidia peninsulae, acute 2006.026
11. Toxicity, chronic, fresh water organisms, NOEC or IC25, percent effluent Fathead minnow, Pimephales promelas, larval survival and growth 1000.027
Fathead minnow, Pimephales promelas, embryo-larval survival and teratogenicity 1001.027
Daphnia, Ceriodaphnia dubia, survival and reproduction 1002.027
Green alga, Selenastrum capricornutum, growth 1003.027
12. Toxicity, chronic, estuarine and marine organisms of the Atlantic Ocean and Gulf of Mexico, NOEC or IC25, percent effluent Sheepshead minnow, Cyprinodon variegatus, larval survival and growth 1004.028
Sheepshead minnow, Cyprinodon variegatus, embryo-larval survival and teratogenicity 1005.028
Inland silverside, Menidia beryllina, larval survival and growth 1006.028
Mysid, Mysidopsis bahia, survival, growth, and fecundity 1007.028
Sea urchin, Arbacia punctulata, fertilization 1008.028

Table IA notes:

1The method must be specified when results are reported.

2A 0.45-µm membrane filter (MF) or other pore size certified by the manufacturer to fully retain organisms to be cultivated and to be free of extractables which could interfere with their growth.

3Microbiological Methods for Monitoring the Environment, Water, and Wastes, EPA/600/8-78/017. 1978. U.S. EPA.

4U.S. Geological Survey Techniques of Water-Resource Investigations, Book 5, Laboratory Analysis, Chapter A4, Methods for Collection and Analysis of Aquatic Biological and Microbiological Samples. 1989. USGS.

5Because the MF technique usually yields low and variable recovery from chlorinated wastewaters, the Most Probable Number method will be required to resolve any controversies.

6Tests must be conducted to provide organism enumeration (density). Select the appropriate configuration of tubes/filtrations and dilutions/volumes to account for the quality, character, consistency, and anticipated organism density of the water sample.

7When the MF method has been used previously to test waters with high turbidity, large numbers of noncoliform bacteria, or samples that may contain organisms stressed by chlorine, a parallel test should be conducted with a multiple-tube technique to demonstrate applicability and comparability of results.

8To assess the comparability of results obtained with individual methods, it is suggested that side-by-side tests be conducted across seasons of the year with the water samples routinely tested in accordance with the most current Standard Methods for the Examination of Water and Wastewater or EPA alternate test procedure (ATP) guidelines.

9Annual Book of ASTM Standards-Water and Environmental Technology, Section 11.02. 2000, 1999, 1996. ASTM International.

10Official Methods of Analysis of AOAC International. 16th Edition, 4th Revision, 1998. AOAC International.

11Approved for enumeration of target organism in sewage sludge.

12The multiple-tube fermentation test is used in 9221B.2-2006. Lactose broth may be used in lieu of lauryl tryptose broth (LTB), if at least 25 parallel tests are conducted between this broth and LTB using the water samples normally tested, and this comparison demonstrates that the false-positive rate and false-negative rate for total coliform using lactose broth is less than 10 percent. No requirement exists to run the completed phase on 10 percent of all total coliform-positive tubes on a seasonal basis.

13These tests are collectively known as defined enzyme substrate tests, where, for example, a substrate is used to detect the enzyme β-glucuronidase produced by E. coli.

14After prior enrichment in a presumptive medium for total coliform using 9221B.2-2006, all presumptive tubes or bottles showing any amount of gas, growth or acidity within 48 h ± 3 h of incubation shall be submitted to 9221F-2006. Commercially available EC-MUG media or EC media supplemented in the laboratory with 50 µg/mL of MUG may be used.

15Method 1680: Fecal Coliforms in Sewage Sludge (Biosolids) by Multiple-Tube Fermentation Using Lauryl-Tryptose Broth (LTB) and EC Medium, EPA-821-R-14-009. September 2014. U.S. EPA.

16Samples shall be enumerated by the multiple-tube or multiple-well procedure. Using multiple-tube procedures, employ an appropriate tube and dilution configuration of the sample as needed and report the Most Probable Number (MPN). Samples tested with Colilert® may be enumerated with the multiple-well procedures, Quanti-Tray® and the MPN calculated from the table provided by the manufacturer.

17Colilert-18® is an optimized formulation of the Colilert® for the determination of total coliforms and E. coli that provides results within 18 h of incubation at 35 °C rather than the 24 h required for the Colilert® test and is recommended for marine water samples.

18Descriptions of the Colilert®, Colilert-18®, and Quanti-Tray® may be obtained from IDEXX Laboratories, Inc.

19A description of the mColiBlue24® test, is available from Hach Company.

20Method 1681: Fecal Coliforms in Sewage Sludge (Biosolids) by Multiple-Tube Fermentation using A-1 Medium, EPA-821-R-06-013. July 2006. U.S. EPA.

21Approved for enumeration of target organism in wastewater effluent.

22Method 1603: Escherichia coli (E. coli) in Water by Membrane Filtration Using Modified membrane-Thermotolerant Escherichia coli Agar (modified mTEC), EPA-821-R-14-010. September 2014. U.S. EPA.

23Method 1682: Salmonella in Sewage Sludge (Biosolids) by Modified Semisolid Rappaport-Vassiliadis (MSRV) Medium, EPA-821-R-14-012. September 2014. U.S. EPA.

24A description of the Enterolert® test may be obtained from IDEXX Laboratories Inc.

25 Method 1600: Enterococci in Water by Membrane Filtration Using membrane-Enterococcus Indoxyl-β-D-Glucoside Agar (mEI), EPA-821-R-14-011. September 2014. U.S. EPA.

26Methods for Measuring the Acute Toxicity of Effluents and Receiving Waters to Freshwater and Marine Organisms, EPA-821-R-02-012. Fifth Edition, October 2002. U.S. EPA.

27Short-term Methods for Estimating the Chronic Toxicity of Effluents and Receiving Waters to Freshwater Organisms, EPA-821-R-02-013. Fourth Edition, October 2002. U.S. EPA.

28Short-term Methods for Estimating the Chronic Toxicity of Effluents and Receiving Waters to Marine and Estuarine Organisms, EPA-821-R-02-014. Third Edition, October 2002. U.S. EPA.

29To use Colilert-18® to assay for fecal coliforms, the incubation temperature is 44.5 ± 0.2 °C, and a water bath incubator is used.

30On a monthly basis, at least ten blue colonies from the medium must be verified using Lauryl Tryptose Broth and EC broth, followed by count adjustment based on these results; and representative non-blue colonies should be verified using Lauryl Tryptose Broth. Where possible, verifications should be done from randomized sample sources.

Table IB—List of Approved Inorganic Test Procedures

Open Table
Parameter Methodology58 EPA52 Standard methods ASTM USGS/AOAC/other
1. Acidity, as CaCO3, mg/L Electrometric endpoint or phenolphthalein endpoint 2310 B-2011 D1067-11 I-1020-85.2
2. Alkalinity, as CaCO3, mg/L Electrometric or Colorimetric titration to pH 4.5, Manual 2320 B-2011 D1067-11 973.43,3 I-1030-85.2
    Automatic 310.2 (Rev. 1974)1 I-2030-85.2
3. Aluminum—Total,4 mg/L Digestion,4 followed by any of the following:
    AA direct aspiration36 3111 D-2011 or 3111 E-2011 I-3051-85.2
    AA furnace 3113 B-2010.
    STGFAA 200.9, Rev. 2.2 (1994)
    ICP/AES36 200.5, Rev 4.2 (2003);68 200.7, Rev. 4.4 (1994) 3120 B-2011 D1976-12 I-4471-97.50
    ICP/MS 200.8, Rev. 5.4 (1994) 3125 B-2011 D5673-10 993.14,3 I-4471-97.50
    Direct Current Plasma (DCP)36 D4190-08 See footnote.34
    Colorimetric (Eriochrome cyanine R) 3500-Al B-2011
4. Ammonia (as N), mg/L Manual distillation6 or gas diffusion (pH > 11), followed by any of the following: 350.1, Rev. 2.0 (1993) 4500-NH3 B-2011 973.49.3
    Nesslerization D1426-08 (A) 973.49,3 I-3520-85.2
    Titration 4500-NH3 C-2011
    Electrode 4500-NH3 D-2011 or E-2011 D1426-08 (B)
    Manual phenate, salicylate, or other substituted phenols in Berthelot reaction based methods 4500-NH3 F-2011 See footnote.60
    Automated phenate, salicylate, or other substituted phenols in Berthelot reaction based methods 350.1,30 Rev. 2.0 (1993) 4500-NH3 G-2011, 4500-NH3 H-2011 I-4523-85.2
    Automated electrode See footnote.7
    Ion Chromatography D6919-09
    Automated gas diffusion, followed by conductivity cell analysis Timberline Ammonia-001.74
5. Antimony—Total,4 mg/L Digestion,4 followed by any of the following:
    AA direct aspiration36 3111 B-2011
    AA furnace 3113 B-2010
    STGFAA 200.9, Rev. 2.2 (1994)
    ICP/AES36 200.5, Rev 4.2 (2003);68 200.7, Rev. 4.4 (1994) 3120 B-2011 D1976-12 I-4471-97.50
    ICP/MS 200.8, Rev. 5.4 (1994) 3125 B-2011 D5673-10 993.14,3 I-4471-97.50
6. Arsenic-Total,4 mg/L Digestion,4 followed by any of the following: 206.5 (Issued 1978)1
    AA gaseous hydride 3114 B-2011 or 3114 C-2011 D2972-08 (B) I-3062-85.2
    AA furnace 3113 B-2010 D2972-08 (C) I-4063-98.49
    STGFAA 200.9, Rev. 2.2 (1994)
    ICP/AES36 200.5, Rev 4.2 (2003);68 200.7, Rev. 4.4 (1994) 3120 B-2011 D1976-12
    ICP/MS 200.8, Rev. 5.4 (1994) 3125 B-2011 D5673-10 993.14,3 I-4020-05.70
    Colorimetric (SDDC) 3500-As B-2011 D2972-08 (A) I-3060-85.2
7. Barium—Total,4 mg/L Digestion,4 followed by any of the following:
    AA direct aspiration36 3111 D-2011 I-3084-85.2
    AA furnace 3113 B-2010 D4382-12
    ICP/AES36 200.5, Rev 4.2 (2003);68 200.7, Rev. 4.4 (1994) 3120 B-2011 I-4471-97.50
    ICP/MS 200.8, Rev. 5.4 (1994) 3125 B-2011 D5673-10 993.14,3 I-4471-97.50
    DCP36 See footnote.34
8. Beryllium—Total,4 mg/L Digestion,4 followed by any of the following:
    AA direct aspiration 3111 D-2011 or 3111 E-2011 D3645-08 (A) I-3095-85.2
    AA furnace 3113 B-2010 D3645-08 (B)
    STGFAA 200.9, Rev. 2.2 (1994)
    ICP/AES 200.5, Rev 4.2 (2003);68 200.7, Rev. 4.4 (1994) 3120 B-2011 D1976-12 I-4471-97.50
    ICP/MS 200.8, Rev. 5.4 (1994) 3125 B-2011 D5673-10 993.14,3 I-4471-97.50
    DCP D4190-08 See footnote.34
    Colorimetric (aluminon) See footnote.61
9. Biochemical oxygen demand (BOD5), mg/L Dissolved Oxygen Depletion 5210 B-2011 973.44,3 p. 17,9 I-1578-78,8 See footnote.10 63
10. Boron—Total,37 mg/L Colorimetric (curcumin) 4500-B B-2011 I-3112-85.2
    ICP/AES 200.5, Rev 4.2 (2003);68 200.7, Rev. 4.4 (1994) 3120 B-2011 D1976-12 I-4471-97.50
    ICP/MS 200.8, Rev. 5.4 (1994) 3125 B-2011 D5673-10 993.14,3 I-4471-97.50
    DCP D4190-08 See footnote.34
11. Bromide, mg/L Electrode D1246-10 I-1125-85.2
    Ion Chromatography 300.0, Rev 2.1 (1993) and 300.1, Rev 1.0 (1997) 4110 B-2011, C-2011, D-2011 D4327-03 993.30.3
    CIE/UV 4140 B-2011 D6508-10 D6508, Rev. 2.54
12. Cadmium—Total,4 mg/L Digestion,4 followed by any of the following:
    AA direct aspiration36 3111 B-2011 or 3111 C-2011 D3557-12 (A or B) 974.27,3 p. 37,9 I-3135-852 or I-3136-85.2
    AA furnace 3113 B-2010 D3557-12 (D) I-4138-89.51
    STGFAA 200.9, Rev. 2.2 (1994)
    ICP/AES36 200.5, Rev 4.2 (2003);68 200.7, Rev. 4.4 (1994) 3120 B-2011 D1976-12 I-1472-852 or I-4471-97.50
    ICP/MS 200.8, Rev. 5.4 (1994) 3125 B-2011 D5673-10 993.14,3 I-4471-97.50
    DCP36 D4190-08 See footnote.34
    Voltametry11 D3557-12 (C)
    Colorimetric (Dithizone) 3500-Cd-D-1990
13. Calcium—Total,4 mg/L Digestion,4 followed by any of the following:
    AA direct aspiration 3111 B-2011 D511-09(B) I-3152-85.2
    ICP/AES 200.5, Rev 4.2 (2003);68 200.7, Rev. 4.4 (1994) 3120 B-2011 I-4471-97.50
    ICP/MS 200.8, Rev. 5.4 (1994) 3125 B-2011 D5673-10 993.14.3
    DCP See footnote.34
    Titrimetric (EDTA) 3500-Ca B-2011 D511-09 (A)
    Ion Chromatography D6919-09
14. Carbonaceous biochemical oxygen demand (CBOD5), mg/L12 Dissolved Oxygen Depletion with nitrification inhibitor 5210 B-2011 See footnote.35 63
15. Chemical oxygen demand (COD), mg/L Titrimetric 410.3 (Rev. 1978)1 5220 B-2011 or C-2011 D1252-06 (A) 973.46,3 p. 17,9 I-3560-85.2
    Spectrophotometric, manual or automatic 410.4, Rev. 2.0 (1993) 5220 D-2011 D1252-06 (B) See footnotes.13 14, I-3561-85.2
16. Chloride, mg/L Titrimetric: (silver nitrate) 4500-Cl B-2011 D512-04 (B) I-1183-85.2
    (Mercuric nitrate) 4500-Cl C-2011 D512-04 (A) 973.51,3 I-1184-85.2
    Colorimetric: Manual I-1187-85.2
    Automated (ferricyanide) 4500-Cl E-2011 I-2187-85.2
    Potentiometric Titration 4500-Cl D-2011
    Ion Selective Electrode D512-04 (C)
    Ion Chromatography 300.0, Rev 2.1 (1993) and 300.1, Rev 1.0 (1997) 4110 B-2011 or 4110 C-2011 D4327-03 993.30,3 I-2057-90.51
    CIE/UV 4140 B-2011 D6508-10 D6508, Rev. 2.54
17. Chlorine-Total residual, mg/L Amperometric direct 4500-Cl D-2011 D1253-08
    Amperometric direct (low level) 4500-Cl E-2011
    Iodometric direct 4500-Cl B-2011
    Back titration ether end-point15 4500-Cl C-2011
    DPD-FAS 4500-Cl F-2011
    Spectrophotometric, DPD 4500-Cl G-2011
    Electrode See footnote.16
17A. Chlorine-Free Available, mg/L Amperometric direct 4500-Cl D-2011 D1253-08
    Amperometric direct (low level) 4500-Cl E-2011
    DPD-FAS 4500-Cl F-2011
    Spectrophotometric, DPD 4500-Cl G-2011
18. Chromium VI dissolved, mg/L 0.45-micron filtration followed by any of the following:
    AA chelation-extraction 3111 C-2011 I-1232-85.2
    Ion Chromatography 218.6, Rev. 3.3 (1994) 3500-Cr C-2011 D5257-11 993.23.3
    Colorimetric (diphenyl-carbazide) 3500-Cr B-2011 D1687-12 (A) I-1230-85.2
19. Chromium—Total,4 mg/L Digestion,4 followed by any of the following:
    AA direct aspiration36 3111 B-2011 D1687-12 (B) 974.27,3 I-3236-85.2
    AA chelation-extraction 3111 C-2011
    AA furnace 3113 B-2010 D1687-12 (C) I-3233-93.46
    STGFAA 200.9, Rev. 2.2 (1994)
    ICP/AES36 200.5, Rev 4.2 (2003),68 200.7, Rev. 4.4 (1994) 3120 B-2011 D1976-12 I-4471-97.50
    ICP/MS 200.8, Rev. 5.4 (1994) 3125 B-2011 D5673-10 993.14,3 I-4020-05.70
    DCP36 D4190-08 See footnote.34
    Colorimetric (diphenyl-carbazide) 3500-Cr B-2011
20. Cobalt—Total,4 mg/L Digestion,4 followed by any of the following:
    AA direct aspiration 3111 B-2011 or 3111 C-2011 D3558-08 (A or B) p. 37,9 I-3239-85.2
    AA furnace 3113 B-2010 D3558-08 (C) I-4243-89.51
    STGFAA 200.9, Rev. 2.2 (1994)
    ICP/AES36 200.7, Rev. 4.4 (1994) 3120 B-2011 D1976-12 I-4471-97.50
    ICP/MS 200.8, Rev. 5.4 (1994) 3125 B-2011 D5673-10 993.14,3 I-4020-05.70
    DCP D4190-08 See footnote.34
21. Color, platinum cobalt units or dominant wavelength, hue, luminance purity Colorimetric (ADMI) 2120 F-201178
    Platinum cobalt visual comparison 2120 B-2011 I-1250-85.2
    Spectrophotometric See footnote.18
22. Copper—Total,4 mg/L Digestion,4 followed by any of the following:
    AA direct aspiration36 3111 B-2011 or 3111 C-2011 D1688-12 (A or B) 974.27,3 p. 37,9 I-3270-852 or I-3271-85.2
    AA furnace 3113 B-2010 D1688-12 (C) I-4274-89.51
    STGFAA 200.9, Rev. 2.2 (1994)
    ICP/AES36 200.5, Rev 4.2 (2003);68 200.7, Rev. 4.4 (1994) 3120 B-2011 D1976-12 I-4471-97.50
    ICP/MS 200.8, Rev. 5.4 (1994) 3125 B-2011 D5673-10 993.14,3 I-4020-05.70
    DCP36 D4190-08 See footnote.34
    Colorimetric (Neocuproine) 3500-Cu B-2011
    Colorimetric (Bathocuproine) 3500-Cu C-2011 See footnote.19
23. Cyanide—Total, mg/L Automated UV digestion/distillation and Colorimetry Kelada-01.55
    Segmented Flow Injection, In-Line Ultraviolet Digestion, followed by gas diffusion amperometry D7511-12
    Manual distillation with MgCl2, followed by any of the following: 335.4, Rev. 1.0 (1993)57 4500-CN B-2011 and C-2011 D2036-09(A), D7284-13 10-204-00-1-X.56
    Flow Injection, gas diffusion amperometry D2036-09(A) D7284-13
    Titrimetric 4500-CN D-2011 D2036-09(A) p. 22.9
    Spectrophotometric, manual 4500-CN E-2011 D2036-09(A) I-3300-85.2
    Semi-Automated20 335.4, Rev. 1.0 (1993)57 10-204-00-1-X,56 I-4302-85.2
    Ion Chromatography D2036-09(A)
    Ion Selective Electrode 4500-CN F-2011 D2036-09(A)
24. Cyanide—Available, mg/L Cyanide Amenable to Chlorination (CATC); Manual distillation with MgCl2, followed by Titrimetric or Spectrophotometric 4500-CN G-2011 D2036-09(B)
    Flow injection and ligand exchange, followed by gas diffusion amperometry59 D6888-09 OIA-1677-09.44
    Automated Distillation and Colorimetry (no UV digestion) Kelada-01.55
24.A Cyanide—Free, mg/L Flow Injection, followed by gas diffusion amperometry D7237-10 OIA-1677-09.44
    Manual micro-diffusion and colorimetry D4282-02
25. Fluoride—Total, mg/L Manual distillation,6 followed by any of the following: 4500-F B-2011
    Electrode, manual 4500-F C-2011 D1179-10 (B)
    Electrode, automated I-4327-85.2
    Colorimetric, (SPADNS) 4500-F D-2011 D1179-10 (A)
    Automated complexone 4500-F E-2011
    Ion Chromatography 300.0, Rev 2.1 (1993) and 300.1, Rev 1.0 (1997) 4110 B-2011 or C-2011 D4327-03 993.30.3
    CIE/UV 4140 B-2011 D6508-10 D6508, Rev. 2.54
26. Gold—Total,4 mg/L Digestion,4 followed by any of the following:
    AA direct aspiration 3111 B-2011
    AA furnace 231.2 (Issued 1978)1 3113 B-2010
    ICP/MS 200.8, Rev. 5.4 (1994) 3125 B-2011 D5673-10 993.14.3
    DCP See footnote.34
27. Hardness—Total, as CaCO3, mg/L Automated colorimetric 130.1 (Issued 1971)1
    Titrimetric (EDTA) 2340 C-2011 D1126-12 973.52B,3 I-1338-85.2
    Ca plus Mg as their carbonates, by any approved method for Ca and Mg (See Parameters 13 and 33), provided that the sum of the lowest point of quantitation for Ca and Mg is below the NPDES permit requirement for Hardness. 2340 B-2011
28. Hydrogen ion (pH), pH units Electrometric measurement 4500-H+ B-2011 D1293-99 (A or B) 973.41,3 I-1586-85.2
    Automated electrode 150.2 (Dec. 1982)1 See footnote,21 I-2587-85.2
29. Iridium—Total,4 mg/L Digestion,4 followed by any of the following:
    AA direct aspiration 3111 B-2011
    AA furnace 235.2 (Issued 1978)1
    ICP/MS 3125 B-2011
30. Iron—Total,4 mg/L Digestion,4 followed by any of the following:
    AA direct aspiration36 3111 B-2011 or 3111 C-2011 D1068-10 (A) 974.27,3 I-3381-85.2
    AA furnace 3113 B-2010 D1068-10 (B)
    STGFAA 200.9, Rev. 2.2 (1994)
    ICP/AES36 200.5, Rev. 4.2 (2003);68 200.7, Rev. 4.4 (1994) 3120 B-2011 D1976-12 I-4471-97.50
    ICP/MS 200.8, Rev. 5.4 (1994) 3125 B-2011 D5673-10 993.14.3
    DCP36 D4190-08 See footnote.34
    Colorimetric (Phenanthroline) 3500-Fe B-2011 D1068-10 (C) See footnote.22
31. Kjeldahl Nitrogen5—Total, (as N), mg/L Manual digestion20 and distillation or gas diffusion, followed by any of the following: 4500-Norg B-2011 or C-2011 and 4500-NH3 B-2011 D3590-11 (A) I-4515-91.45
    Titration 4500-NH3 C-2011 973.48.3
    Nesslerization D1426-08 (A)
    Electrode 4500-NH3 D-2011 or E-2011 D1426-08 (B)
    Semi-automated phenate 350.1, Rev. 2.0 (1993) 4500-NH3 G-2011 4500-NH3 H-2011
    Manual phenate, salicylate, or other substituted phenols in Berthelot reaction based methods 4500-NH3 F-2011 See footnote.60
    Automated gas diffusion, followed by conductivity cell analysis Timberline Ammonia-001.74
    Automated Methods for TKN that do not require manual distillation.
    Automated phenate, salicylate, or other substituted phenols in Berthelot reaction based methods colorimetric (auto digestion and distillation) 351.1 (Rev. 1978)1 I-4551-78.8
    Semi-automated block digestor colorimetric (distillation not required) 351.2, Rev. 2.0 (1993) 4500-Norg D-2011 D3590-11 (B) I-4515-91.45
    Block digester, followed by Auto distillation and Titration See footnote.39
    Block digester, followed by Auto distillation and Nesslerization See footnote.40
    Block Digester, followed by Flow injection gas diffusion (distillation not required) See footnote.41
    Digestion with peroxdisulfate, followed by Spectrophotometric (2,6-dimethyl phenol) Hach 10242.76
    Digestion with persulfate, followed by Colorimetric NCASI TNTP W10900.77
32. Lead—Total,4 mg/L Digestion,4 followed by any of the following:
    AA direct aspiration36 3111 B-2011 or 3111 C-2011 D3559-08 (A or B) 974.27,3 I-3399-85.2
    AA furnace 3113 B-2010 D3559-08 (D) I-4403-89.51
    STGFAA 200.9, Rev. 2.2 (1994)
    ICP/AES36 200.5, Rev. 4.2 (2003);68 200.7, Rev. 4.4 (1994) 3120 B-2011 D1976-12 I-4471-97.50
    ICP/MS 200.8, Rev. 5.4 (1994) 3125 B-2011 D5673-10 993.14,3 I-4471-97.50
    DCP36 D4190-08 See footnote.34
    Voltametry11 D3559-08 (C)
    Colorimetric (Dithizone) 3500-Pb B-2011
33. Magnesium—Total,4 mg/L Digestion,4 followed by any of the following:
    AA direct aspiration 3111 B-2011 D511-09 (B) 974.27,3 I-3447-85.2
    ICP/AES 200.5, Rev. 4.2 (2003);68 200.7, Rev. 4.4 (1994) 3120 B-2011 D1976-12 I-4471-97.50
    ICP/MS 200.8, Rev. 5.4 (1994) 3125 B-2011 D5673-10 993.14.3
    DCP See footnote.34
Ion Chromatography D6919-09
34. Manganese—Total,4 mg/L Digestion,4 followed by any of the following:
    AA direct aspiration36 3111 B-2011 D858-12 (A or B) 974.27,3 I-3454-85.2
    AA furnace 3113 B-2010 D858-12 (C)
    STGFAA 200.9, Rev. 2.2 (1994)
    ICP/AES36 200.5, Rev. 4.2 (2003);68 200.7, Rev. 4.4 (1994) 3120 B-2011 D1976-12 I-4471-97.50
    ICP/MS 200.8, Rev. 5.4 (1994) 3125 B-2011 D5673-10 993.14,3 I-4471-97.50
    DCP36 D4190-08 See footnote.34
    Colorimetric (Persulfate) 3500-Mn B-2011 920.203.3
    Colorimetric (Periodate) See footnote.23
35. Mercury—Total,4 mg/L Cold vapor, Manual 245.1, Rev. 3.0 (1994) 3112 B-2011 D3223-12 977.22,3 I-3462-85.2
    Cold vapor, Automated 245.2 (Issued 1974)1
    Cold vapor atomic fluorescence spectrometry (CVAFS) 245.7 Rev. 2.0 (2005)17 I-4464-01.71
    Purge and Trap CVAFS 1631E43
36. Molybdenum—Total,4 mg/L Digestion,4 followed by any of the following:
    AA direct aspiration 3111 D-2011 I-3490-85.2
    AA furnace 3113 B-2010 I-3492-96.47
    ICP/AES36 200.7, Rev. 4.4 (1994) 3120 B-2011 D1976-12 I-4471-97.50
    ICP/MS 200.8, Rev. 5.4 (1994) 3125 B-2011 D5673-10 993.14,3 I-4471-97.50
    DCP See footnote.34
37. Nickel—Total,4 mg/L Digestion,4 followed by any of the following:
    AA direct aspiration36 3111 B-2011 or 3111 C-2011 D1886-08 (A or B) I-3499-85.2
    AA furnace 3113 B-2010 D1886-08 (C) I-4503-89.51
    STGFAA 200.9, Rev. 2.2 (1994)
    ICP/AES36 200.5, Rev. 4.2 (2003);68 200.7, Rev. 4.4 (1994) 3120 B-2011 D1976-12 I-4471-97.50
    ICP/MS 200.8, Rev. 5.4 (1994) 3125 B-2011 D5673-10 993.14,3 I-4020-05.70
    DCP36 D4190-08 See footnote.34
38. Nitrate (as N), mg/L Ion Chromatography 300.0, Rev. 2.1 (1993) and 300.1, Rev. 1.0 (1997) 4110 B-2011 or C-2011 D4327-03 993.30.3
    CIE/UV 4140 B-2011 D6508-10 D6508, Rev. 2.54
    Ion Selective Electrode 4500-NO3 D-2011
    Colorimetric (Brucine sulfate) 352.1 (Issued 1971)1 973.50,3 419D1 7 p. 28.9
    Spectrophotometric (2,6-dimethylphenol) Hach 10206.75
    Nitrate-nitrite N minus Nitrite N (See parameters 39 and 40)
39. Nitrate-nitrite (as N), mg/L Cadmium reduction, Manual 4500-NO3 E-2011 D3867-04 (B)
    Cadmium reduction, Automated 353.2, Rev. 2.0 (1993) 4500-NO3 F-2011 D3867-04 (A) I-2545-90.51
    Automated hydrazine 4500-NO3 H-2011
    Reduction/Colorimetric See footnote.62
    Ion Chromatography 300.0, Rev. 2.1 (1993) and 300.1, Rev. 1.0 (1997) 4110 B-2011 or C-2011 D4327-03 993.30.3
    CIE/UV 4140 B-2011 D6508-10 D6508, Rev. 2.54
    Enzymatic reduction, followed by automated colorimetric determination I-2547-11,72 I-2548-11,72 N07-0003.73
    Spectrophotometric (2,6-dimethylphenol) Hach 10206.75
40. Nitrite (as N), mg/L Spectrophotometric: Manual 4500-NO2 B-2011 See footnote.25
    Automated (Diazotization) I-4540-85,2 See footnote.62
    Automated (*bypass cadmium reduction) 353.2, Rev. 2.0 (1993) 4500-NO3 F-2011 D3867-04 (A) I-4545-85.2
    Manual (*bypass cadmium reduction) 4500-NO3 E-2011 D3867-04 (B)
    Ion Chromatography 300.0, Rev. 2.1 (1993) and 300.1, Rev. 1.0 (1997) 4110 B-2011 or C-2011 D4327-03 993.30.3
    CIE/UV 4140 B-2011 D6508-10 D6508, Rev. 2.54
    Automated (*bypass Enzymatic reduction) I-2547-11,72 I-2548-11,72 N07-0003.73
41. Oil and grease—Total recoverable, mg/L Hexane extractable material (HEM): n-Hexane extraction and gravimetry 1664 Rev. A; 1664 Rev. B42 5520 B-201138
    Silica gel treated HEM (SGT-HEM): Silica gel treatment and gravimetry 1664 Rev. A; 1664 Rev. B42 5520 B-201138 and 5520 F-201138
42. Organic carbon—Total (TOC), mg/L Combustion 5310 B-2011 D7573-09 973.47,3 p. 14.24
    Heated persulfate or UV persulfate oxidation 5310 C-2011, 5310 D-2011 D4839-03 973.47,3 p. 14.24
43. Organic nitrogen (as N), mg/L Total Kjeldahl N (Parameter 31) minus ammonia N (Parameter 4).
44. Ortho-phosphate (as P), mg/L Ascorbic acid method:
    Automated 365.1, Rev. 2.0 (1993) 4500-P F-2011 or G-2011 973.56,3 I-4601-85.2
    Manual single reagent 4500-P E-2011 D515-88 (A) 973.55.3
    Manual two reagent 365.3 (Issued 1978)1
    Ion Chromatography 300.0, Rev. 2.1 (1993) and 300.1, Rev. 1.0 (1997) 4110 B-2011 or C-2011 D4327-03 993.30.3
    CIE/UV 4140 B-2011 D6508-10 D6508, Rev. 2.54
45. Osmium—Total,4 mg/L Digestion,4 followed by any of the following:
    AA direct aspiration 3111 D-2011
    AA furnace 252.2 (Issued 1978)1
46. Oxygen, dissolved, mg/L Winkler (Azide modification) 4500-O (B-F)-2011 D888-09 (A) 973.45B,3 I-1575-78.8
    Electrode 4500-O G-2011 D888-09 (B) I-1576-78.8
    Luminescence Based Sensor D888-09 (C) See footnote.63 See footnote.64
47. Palladium—Total,4 mg/L Digestion,4 followed by any of the following:
    AA direct aspiration 3111 B-2011
    AA furnace 253.2 (Issued 1978)1
    ICP/MS 3125 B-2011
    DCP See footnote.34
48. Phenols, mg/L Manual distillation,26 followed by any of the following: 420.1 (Rev. 1978)1 5530 B-2010 D1783-01
    Colorimetric (4AAP) manual 420.1 (Rev. 1978)1 5530 D-201027 D1783-01 (A or B)
    Automated colorimetric (4AAP) 420.4 Rev. 1.0 (1993)
49. Phosphorus (elemental), mg/L Gas-liquid chromatography See footnote.28
50. Phosphorus—Total, mg/L Digestion,20 followed by any of the following: 4500-P B(5)-2011 973.55.3
    Manual 365.3 (Issued 1978)1 4500-P E-2011 D515-88 (A)
    Automated ascorbic acid reduction 365.1 Rev. 2.0 (1993) 4500-P (F-H)-2011 973.56,3 I-4600-85.2
    ICP/AES4 36 200.7, Rev. 4.4 (1994) 3120 B-2011 I-4471-97.50
    Semi-automated block digestor (TKP digestion) 365.4 (Issued 1974)1 D515-88 (B) I-4610-91.48
    Digestion with persulfate, followed by Colorimetric NCASI TNTP W10900.77
51. Platinum—Total4, mg/L Digestion,4 followed by any of the following:
    AA direct aspiration 3111 B-2011
    AA furnace 255.2 (Issued 1978)1
    ICP/MS 3125 B-2011
    DCP See footnote.34
52. Potassium—Total4, mg/L Digestion,4 followed by any of the following:
    AA direct aspiration 3111 B-2011 973.53,3 I-3630-85.2
    ICP/AES 200.7, Rev. 4.4 (1994) 3120 B-2011
    ICP/MS 200.8, Rev. 5.4 (1994) 3125 B-2011 D5673-10 993.14.3
    Flame photometric 3500-K B-2011
    Electrode 3500-K C-2011
    Ion Chromatography D6919-09
53. Residue—Total, mg/L Gravimetric, 103-105° 2540 B-2011 I-3750-85.2
54. Residue—filterable, mg/L Gravimetric, 180° 2540 C-2011 D5907-13 I-1750-85.2
55. Residue—non-filterable (TSS), mg/L Gravimetric, 103-105° post washing of residue 2540 D-2011 D5907-13 I-3765-85.2
56. Residue—settleable, mg/L Volumetric, (Imhoff cone), or gravimetric 2540 F-2011
57. Residue—Volatile, mg/L Gravimetric, 550° 160.4 (Issued 1971)1 2540-E-2011 I-3753-85.2
58. Rhodium—Total4, mg/L Digestion,4 followed by any of the following:
    AA direct aspiration, or 3111 B-2011
    AA furnace 265.2 (Issued 1978)1
    ICP/MS 3125 B-2011
59. Ruthenium—Total4, mg/L Digestion,4 followed by any of the following:
    AA direct aspiration, or 3111 B-2011
    AA furnace 267.21
    ICP/MS 3125 B-2011
60. Selenium—Total4, mg/L Digestion,4 followed by any of the following:
    AA furnace 3113 B-2010 D3859-08 (B) I-4668-98.49
    STGFAA 200.9, Rev. 2.2 (1994)
    ICP/AES36 200.5, Rev 4.2 (2003)68; 200.7, Rev. 4.4 (1994) 3120 B-2011 D1976-12
    ICP/MS 200.8, Rev. 5.4 (1994) 3125 B-2011 D5673-10 993.14,3 I-4020-05.70
    AA gaseous hydride 3114 B-2011, or 3114 C-2011 D3859-08 (A) I-3667-85.2
61. Silica—Dissolved,37 mg/L 0.45-micron filtration followed by any of the following:
    Colorimetric, Manual 4500-SiO2 C-2011 D859-10 I-1700-85.2
    Automated (Molybdosilicate) 4500-SiO2 E-2011 or F-2011 I-2700-85.2
    ICP/AES 200.5, Rev. 4.2 (2003)68; 200.7, Rev. 4.4 (1994) 3120 B-2011 I-4471-97.50
    ICP/MS 200.8, Rev. 5.4 (1994) 3125 B-2011 D5673-10 993.14.3
62. Silver—Total,4 31 mg/L Digestion,4 29 followed by any of the following:
    AA direct aspiration 3111 B-2011 or 3111 C-2011 974.27,3 p. 37,9 I-3720-85.2
    AA furnace 3113 B-2010 I-4724-89.51
    STGFAA 200.9, Rev. 2.2 (1994)
    ICP/AES 200.5, Rev. 4.2 (2003)68; 200.7, Rev. 4.4 (1994) 3120 B-2011 D1976-12 I-4471-97.50
    ICP/MS 200.8, Rev. 5.4 (1994) 3125 B-2011 D5673-10 993.14,3 I-4471-97.50
    DCP See footnote.34
63. Sodium—Total,4 mg/L Digestion,4 followed by any of the following:
    AA direct aspiration 3111 B-2011 973.54,3 I-3735-85.2
    ICP/AES 200.5, Rev. 4.2 (2003)68; 200.7, Rev. 4.4 (1994) 3120 B-2011 I-4471-97.50
    ICP/MS 200.8, Rev. 5.4 (1994) 3125 B-2011 D5673-10 993.14.3
    DCP See footnote.34
    Flame photometric 3500-Na B-2011
    Ion Chromatography D6919-09
64. Specific conductance, micromhos/cm at 25 °C Wheatstone bridge 120.1 (Rev. 1982)1 2510 B-2011 D1125-95(99) (A) 973.40,3 I-2781-85.2
65. Sulfate (as SO4), mg/L Automated colorimetric 375.2, Rev. 2.0 (1993) 4500-SO42− F-2011 or G-2011
    Gravimetric 4500-SO42− C-2011 or D-2011 925.54.3
Turbidimetric 4500-SO42− E-2011 D516-11
    Ion Chromatography 300.0, Rev. 2.1 (1993) and 300.1, Rev. 1.0 (1997) 4110 B-2011 or C-2011 D4327-03 993.30,3 I-4020-05.70
    CIE/UV 4140 B-2011 D6508-1010 D6508, Rev. 2.54
66. Sulfide (as S), mg/L Sample Pretreatment 4500-S2− B, C-2011
    Titrimetric (iodine) 4500-S2− F-2011 I-3840-85.2
    Colorimetric (methylene blue) 4500-S2− D-2011
    Ion Selective Electrode 4500-S2− G-2011 D4658-09
67. Sulfite (as SO3), mg/L Titrimetric (iodine-iodate) 4500-SO32− B-2011
68. Surfactants, mg/L Colorimetric (methylene blue) 5540 C-2011 D2330-02
69. Temperature, °C Thermometric 2550 B-2010 See footnote.32
70. Thallium—Total,4 mg/L Digestion,4 followed by any of the following:
    AA direct aspiration 3111 B-2011
    AA furnace 279.2 (Issued 1978)1 3113 B-2010
    STGFAA 200.9, Rev. 2.2 (1994)
    ICP/AES 200.7, Rev. 4.4 (1994) 3120 B-2011 D1976-12
    ICP/MS 200.8, Rev. 5.4 (1994) 3125 B-2011 D5673-10 993.14,3 I-4471-97.50
71. Tin—Total,4 mg/L Digestion,4 followed by any of the following:
    AA direct aspiration 3111 B-2011 I-3850-78.8
    AA furnace 3113 B-2010
    STGFAA 200.9, Rev. 2.2 (1994)
    ICP/AES 200.5, Rev. 4.2 (2003)68; 200.7, Rev. 4.4 (1994)
    ICP/MS 200.8, Rev. 5.4 (1994) 3125 B-2011 D5673-10 993.14.3
72. Titanium—Total,4 mg/L Digestion,4 followed by any of the following:
    AA direct aspiration 3111 D-2011
    AA furnace 283.2 (Issued 1978)1
    ICP/AES 200.7, Rev. 4.4 (1994)
    ICP/MS 200.8, Rev. 5.4 (1994) 3125 B-2011 D5673-10 993.14.3
    DCP See footnote.34
73. Turbidity, NTU53 Nephelometric 180.1, Rev. 2.0 (1993) 2130 B-2011 D1889-00 I-3860-85.2 See footnote.65 See footnote.66 See footnote.67
74. Vanadium—Total,4 mg/L Digestion,4 followed by any of the following:
    AA direct aspiration 3111 D-2011
    AA furnace 3113 B-2010 D3373-12
    ICP/AES 200.5, Rev. 4.2 (2003);68 200.7, Rev. 4.4 (1994) 3120 B-2011 D1976-12 I-4471-97.50
    ICP/MS 200.8, Rev. 5.4 (1994) 3125 B-2011 D5673-10 993.14,3 I-4020-05.70
    DCP D4190-08 See footnote.34
    Colorimetric (Gallic Acid) 3500-V B-2011
75. Zinc—Total,4 mg/L Digestion,4 followed by any of the following:
    AA direct aspiration36 3111 B-2011 or 3111 C-2011 D1691-12 (A or B) 974.27,3 p. 37,9 I-3900-85.2
    AA furnace 289.2 (Issued 1978)1
    ICP/AES36 200.5, Rev. 4.2 (2003)68; 200.7, Rev. 4.4 (1994) 3120 B-2011 D1976-12 I-4471-97.50
    ICP/MS 200.8, Rev. 5.4 (1994) 3125 B-2011 D5673-10 993.14,3 I-4020-05.70
    DCP36 D4190-08 See footnote.34
    Colorimetric (Zincon) 3500 Zn B-2011 See footnote.33
76. Acid Mine Drainage 162769

Table IB Notes:

1Methods for Chemical Analysis of Water and Wastes, EPA-600/4-79-020. Revised March 1983 and 1979, where applicable. U.S. EPA.

2Methods for Analysis of Inorganic Substances in Water and Fluvial Sediments, Techniques of Water-Resource Investigations of the U.S. Geological Survey, Book 5, Chapter A1., unless otherwise stated. 1989. USGS.

3Official Methods of Analysis of the Association of Official Analytical Chemists, Methods Manual, Sixteenth Edition, 4th Revision, 1998. AOAC International.

4For the determination of total metals (which are equivalent to total recoverable metals) the sample is not filtered before processing. A digestion procedure is required to solubilize analytes in suspended material and to break down organic-metal complexes (to convert the analyte to a detectable form for colorimetric analysis). For non-platform graphite furnace atomic absorption determinations, a digestion using nitric acid (as specified in Section 4.1.3 of Methods for the Chemical Analysis of Water and Wastes) is required prior to analysis. The procedure used should subject the sample to gentle, acid refluxing and at no time should the sample be taken to dryness. For direct aspiration flame atomic absorption determinations (FLAA) a combination acid (nitric and hydrochloric acids) digestion is preferred prior to analysis. The approved total recoverable digestion is described as Method 200.2 in Supplement I of “Methods for the Determination of Metals in Environmental Samples” EPA/600R-94/111, May, 1994, and is reproduced in EPA Methods 200.7, 200.8, and 200.9 from the same Supplement. However, when using the gaseous hydride technique or for the determination of certain elements such as antimony, arsenic, selenium, silver, and tin by non-EPA graphite furnace atomic absorption methods, mercury by cold vapor atomic absorption, the noble metals and titanium by FLAA, a specific or modified sample digestion procedure may be required and in all cases the referenced method write-up should be consulted for specific instruction and/or cautions. For analyses using inductively coupled plasma-atomic emission spectrometry (ICP-AES), the direct current plasma (DCP) technique or EPA spectrochemical techniques (platform furnace AA, ICP-AES, and ICP-MS) use EPA Method 200.2 or an approved alternate procedure (e.g., CEM microwave digestion, which may be used with certain analytes as indicated in Table IB); the total recoverable digestion procedures in EPA Methods 200.7, 200.8, and 200.9 may be used for those respective methods. Regardless of the digestion procedure, the results of the analysis after digestion procedure are reported as “total” metals.

5Copper sulfate or other catalysts that have been found suitable may be used in place of mercuric sulfate.

6Manual distillation is not required if comparability data on representative effluent samples are on file to show that this preliminary distillation step is not necessary: However, manual distillation will be required to resolve any controversies. In general, the analytical method should be consulted regarding the need for distillation. If the method is not clear, the laboratory may compare a minimum of 9 different sample matrices to evaluate the need for distillation. For each matrix, a matrix spike and matrix spike duplicate are analyzed both with and without the distillation step. (A total of 36 samples, assuming 9 matrices). If results are comparable, the laboratory may dispense with the distillation step for future analysis. Comparable is defined as <20% RPD for all tested matrices). Alternatively the two populations of spike recovery percentages may be compared using a recognized statistical test.

7Industrial Method Number 379-75 WE Ammonia, Automated Electrode Method, Technicon Auto Analyzer II. February 19, 1976. Bran & Luebbe Analyzing Technologies Inc.

8The approved method is that cited in Methods for Determination of Inorganic Substances in Water and Fluvial Sediments, Techniques of Water-Resources Investigations of the U.S. Geological Survey, Book 5, Chapter A1. 1979. USGS.

9American National Standard on Photographic Processing Effluents. April 2, 1975. American National Standards Institute.

10In-Situ Method 1003-8-2009, Biochemical Oxygen Demand (BOD) Measurement by Optical Probe. 2009. In-Situ Incorporated.

11The use of normal and differential pulse voltage ramps to increase sensitivity and resolution is acceptable.

12Carbonaceous biochemical oxygen demand (CBOD5) must not be confused with the traditional BOD5 test method which measures “total 5-day BOD.” The addition of the nitrification inhibitor is not a procedural option, but must be included to report the CBOD5 parameter. A discharger whose permit requires reporting the traditional BOD5 may not use a nitrification inhibitor in the procedure for reporting the results. Only when a discharger's permit specifically states CBOD5 is required can the permittee report data using a nitrification inhibitor.

13OIC Chemical Oxygen Demand Method. 1978. Oceanography International Corporation.

14Method 8000, Chemical Oxygen Demand, Hach Handbook of Water Analysis, 1979. Hach Company.

15The back titration method will be used to resolve controversy.

16Orion Research Instruction Manual, Residual Chlorine Electrode Model 97-70. 1977. Orion Research Incorporated. The calibration graph for the Orion residual chlorine method must be derived using a reagent blank and three standard solutions, containing 0.2, 1.0, and 5.0 mL 0.00281 N potassium iodate/100 mL solution, respectively.

17Method 245.7, Mercury in Water by Cold Vapor Atomic Fluorescence Spectrometry, EPA-821-R-05-001. Revision 2.0, February 2005. US EPA.

18National Council of the Paper Industry for Air and Stream Improvement (NCASI) Technical Bulletin 253 (1971) and Technical Bulletin 803, May 2000.

19Method 8506, Bicinchoninate Method for Copper, Hach Handbook of Water Analysis. 1979. Hach Company.

20When using a method with block digestion, this treatment is not required.

21Industrial Method Number 378-75WA, Hydrogen ion (pH) Automated Electrode Method, Bran & Luebbe (Technicon) Autoanalyzer II. October 1976. Bran & Luebbe Analyzing Technologies.

22Method 8008, 1,10-Phenanthroline Method using FerroVer Iron Reagent for Water. 1980. Hach Company.

23Method 8034, Periodate Oxidation Method for Manganese, Hach Handbook of Wastewater Analysis. 1979. Hach Company.

24Methods for Analysis of Organic Substances in Water and Fluvial Sediments, Techniques of Water-Resources Investigations of the U.S. Geological Survey, Book 5, Chapter A3, (1972 Revised 1987). 1987. USGS.

25Method 8507, Nitrogen, Nitrite-Low Range, Diazotization Method for Water and Wastewater. 1979. Hach Company.

26Just prior to distillation, adjust the sulfuric-acid-preserved sample to pH 4 with 1 + 9 NaOH.

27The colorimetric reaction must be conducted at a pH of 10.0 ± 0.2.

28Addison, R.F., and R.G. Ackman. 1970. Direct Determination of Elemental Phosphorus by Gas-Liquid Chromatography, Journal of Chromatography, 47(3):421-426.

29Approved methods for the analysis of silver in industrial wastewaters at concentrations of 1 mg/L and above are inadequate where silver exists as an inorganic halide. Silver halides such as the bromide and chloride are relatively insoluble in reagents such as nitric acid but are readily soluble in an aqueous buffer of sodium thiosulfate and sodium hydroxide to pH of 12. Therefore, for levels of silver above 1 mg/L, 20 mL of sample should be diluted to 100 mL by adding 40 mL each of 2 M Na2S2O3and NaOH. Standards should be prepared in the same manner. For levels of silver below 1 mg/L the approved method is satisfactory.

30The use of EDTA decreases method sensitivity. Analysts may omit EDTA or replace with another suitable complexing reagent provided that all method specified quality control acceptance criteria are met.

31For samples known or suspected to contain high levels of silver (e.g., in excess of 4 mg/L), cyanogen iodide should be used to keep the silver in solution for analysis. Prepare a cyanogen iodide solution by adding 4.0 mL of concentrated NH4OH, 6.5 g of KCN, and 5.0 mL of a 1.0 N solution of I2 to 50 mL of reagent water in a volumetric flask and dilute to 100.0 mL. After digestion of the sample, adjust the pH of the digestate to >7 to prevent the formation of HCN under acidic conditions. Add 1 mL of the cyanogen iodide solution to the sample digestate and adjust the volume to 100 mL with reagent water (NOT acid). If cyanogen iodide is added to sample digestates, then silver standards must be prepared that contain cyanogen iodide as well. Prepare working standards by diluting a small volume of a silver stock solution with water and adjusting the pH>7 with NH4OH. Add 1 mL of the cyanogen iodide solution and let stand 1 hour. Transfer to a 100-mL volumetric flask and dilute to volume with water.

32“Water Temperature-Influential Factors, Field Measurement and Data Presentation,” Techniques of Water-Resources Investigations of the U.S. Geological Survey, Book 1, Chapter D1. 1975. USGS.

33Method 8009, Zincon Method for Zinc, Hach Handbook of Water Analysis, 1979. Hach Company.

34Method AES0029, Direct Current Plasma (DCP) Optical Emission Spectrometric Method for Trace Elemental Analysis of Water and Wastes. 1986-Revised 1991. Thermo Jarrell Ash Corporation.

35In-Situ Method 1004-8-2009, Carbonaceous Biochemical Oxygen Demand (CBOD) Measurement by Optical Probe. 2009. In-Situ Incorporated.

36Microwave-assisted digestion may be employed for this metal, when analyzed by this methodology. Closed Vessel Microwave Digestion of Wastewater Samples for Determination of Metals. April 16, 1992. CEM Corporation.

37When determining boron and silica, only plastic, PTFE, or quartz laboratory ware may be used from start until completion of analysis.

38Only use n-hexane (n-Hexane—85% minimum purity, 99.0% min. saturated C6 isomers, residue less than 1 mg/L) extraction solvent when determining Oil and Grease parameters—Hexane Extractable Material (HEM), or Silica Gel Treated HEM (analogous to EPA Methods 1664 Rev. A and 1664 Rev. B). Use of other extraction solvents is prohibited.

39Method PAI-DK01, Nitrogen, Total Kjeldahl, Block Digestion, Steam Distillation, Titrimetric Detection. Revised December 22, 1994. OI Analytical.

40Method PAI-DK02, Nitrogen, Total Kjeldahl, Block Digestion, Steam Distillation, Colorimetric Detection. Revised December 22, 1994. OI Analytical.

41Method PAI-DK03, Nitrogen, Total Kjeldahl, Block Digestion, Automated FIA Gas Diffusion. Revised December 22, 1994. OI Analytical.

42Method 1664 Rev. B is the revised version of EPA Method 1664 Rev. A. U.S. EPA. February 1999, Revision A. Method 1664, n-Hexane Extractable Material (HEM; Oil and Grease) and Silica Gel Treated n-Hexane Extractable Material (SGT-HEM; Non-polar Material) by Extraction and Gravimetry. EPA-821-R-98-002. U.S. EPA. February 2010, Revision B. Method 1664, n-Hexane Extractable Material (HEM; Oil and Grease) and Silica Gel Treated n-Hexane Extractable Material (SGT-HEM; Non-polar Material) by Extraction and Gravimetry. EPA-821-R-10-001.

43Method 1631, Revision E, Mercury in Water by Oxidation, Purge and Trap, and Cold Vapor Atomic Fluorescence Spectrometry, EPA-821-R-02-019. Revision E. August 2002, U.S. EPA. The application of clean techniques described in EPA's Method 1669: Sampling Ambient Water for Trace Metals at EPA Water Quality Criteria Levels, EPA-821-R-96-011, are recommended to preclude contamination at low-level, trace metal determinations.

44Method OIA-1677-09, Available Cyanide by Ligand Exchange and Flow Injection Analysis (FIA). 2010. OI Analytical.

45Open File Report 00-170, Methods of Analysis by the U.S. Geological Survey National Water Quality Laboratory—Determination of Ammonium Plus Organic Nitrogen by a Kjeldahl Digestion Method and an Automated Photometric Finish that Includes Digest Cleanup by Gas Diffusion. 2000. USGS.

46Open File Report 93-449, Methods of Analysis by the U.S. Geological Survey National Water Quality Laboratory—Determination of Chromium in Water by Graphite Furnace Atomic Absorption Spectrophotometry. 1993. USGS.

47Open File Report 97-198, Methods of Analysis by the U.S. Geological Survey National Water Quality Laboratory—Determination of Molybdenum by Graphite Furnace Atomic Absorption Spectrophotometry. 1997. USGS.

48Open File Report 92-146, Methods of Analysis by the U.S. Geological Survey National Water Quality Laboratory—Determination of Total Phosphorus by Kjeldahl Digestion Method and an Automated Colorimetric Finish That Includes Dialysis. 1992. USGS.

49Open File Report 98-639, Methods of Analysis by the U.S. Geological Survey National Water Quality Laboratory—Determination of Arsenic and Selenium in Water and Sediment by Graphite Furnace-Atomic Absorption Spectrometry. 1999. USGS.

50Open File Report 98-165, Methods of Analysis by the U.S. Geological Survey National Water Quality Laboratory—Determination of Elements in Whole-water Digests Using Inductively Coupled Plasma-Optical Emission Spectrometry and Inductively Coupled Plasma-Mass Spectrometry. 1998. USGS.

51Open File Report 93-125, Methods of Analysis by the U.S. Geological Survey National Water Quality Laboratory—Determination of Inorganic and Organic Constituents in Water and Fluvial Sediments. 1993. USGS.

52Unless otherwise indicated, all EPA methods, excluding EPA Method 300.1, are published in U.S. EPA. May 1994. Methods for the Determination of Metals in Environmental Samples, Supplement I, EPA/600/R-94/111; or U.S. EPA. August 1993. Methods for the Determination of Inorganic Substances in Environmental Samples, EPA/600/R-93/100. EPA Method 300.1 is US EPA. Revision 1.0, 1997, including errata cover sheet April 27, 1999. Determination of Inorganic Ions in Drinking Water by Ion Chromatography.

53Styrene divinyl benzene beads (e.g., AMCO-AEPA-1 or equivalent) and stabilized formazin (e.g., Hach StablCalTMor equivalent) are acceptable substitutes for formazin.

54Method D6508-10, Test Method for Determination of Dissolved Inorganic Anions in Aqueous Matrices Using Capillary Ion Electrophoresis and Chromate Electrolyte. 2010. ASTM.

55Kelada-01, Kelada Automated Test Methods for Total Cyanide, Acid Dissociable Cyanide, and Thiocyanate, EPA 821-B-01-009, Revision 1.2, August 2001. US EPA. Note: A 450-W UV lamp may be used in this method instead of the 550-W lamp specified if it provides performance within the quality control (QC) acceptance criteria of the method in a given instrument. Similarly, modified flow cell configurations and flow conditions may be used in the method, provided that the QC acceptance criteria are met.

56QuikChem Method 10-204-00-1-X, Digestion and Distillation of Total Cyanide in Drinking and Wastewaters using MICRO DIST and Determination of Cyanide by Flow Injection Analysis. Revision 2.2, March 2005. Lachat Instruments.

57When using sulfide removal test procedures described in EPA Method 335.4-1, reconstitute particulate that is filtered with the sample prior to distillation.

58Unless otherwise stated, if the language of this table specifies a sample digestion and/or distillation “followed by” analysis with a method, approved digestion and/or distillation are required prior to analysis.

59Samples analyzed for available cyanide using OI Analytical method OIA-1677-09 or ASTM method D6888-09 that contain particulate matter may be filtered only after the ligand exchange reagents have been added to the samples, because the ligand exchange process converts complexes containing available cyanide to free cyanide, which is not removed by filtration. Analysts are further cautioned to limit the time between the addition of the ligand exchange reagents and sample filtration to no more than 30 minutes to preclude settling of materials in samples.

60Analysts should be aware that pH optima and chromophore absorption maxima might differ when phenol is replaced by a substituted phenol as the color reagent in Berthelot Reaction (“phenol-hypochlorite reaction”) colorimetric ammonium determination methods. For example when phenol is used as the color reagent, pH optimum and wavelength of maximum absorbance are about 11.5 and 635 nm, respectively—see, Patton, C.J. and S.R. Crouch. March 1977. Anal. Chem. 49:464-469. These reaction parameters increase to pH > 12.6 and 665 nm when salicylate is used as the color reagent—see, Krom, M.D. April 1980. The Analyst 105:305-316.

61If atomic absorption or ICP instrumentation is not available, the aluminon colorimetric method detailed in the 19th Edition of Standard Methods may be used. This method has poorer precision and bias than the methods of choice.

62Easy (1-Reagent) Nitrate Method, Revision November 12, 2011. Craig Chinchilla.

63Hach Method 10360, Luminescence Measurement of Dissolved Oxygen in Water and Wastewater and for Use in the Determination of BOD5 and cBOD5. Revision 1.2, October 2011. Hach Company. This method may be used to measure dissolved oxygen when performing the methods approved in Table IB for measurement of biochemical oxygen demand (BOD) and carbonaceous biochemical oxygen demand (CBOD).

64In-Situ Method 1002-8-2009, Dissolved Oxygen (DO) Measurement by Optical Probe. 2009. In-Situ Incorporated.

65Mitchell Method M5331, Determination of Turbidity by Nephelometry. Revision 1.0, July 31, 2008. Leck Mitchell.

66Mitchell Method M5271, Determination of Turbidity by Nephelometry. Revision 1.0, July 31, 2008. Leck Mitchell.

67Orion Method AQ4500, Determination of Turbidity by Nephelometry. Revision 5, March 12, 2009. Thermo Scientific.

68EPA Method 200.5, Determination of Trace Elements in Drinking Water by Axially Viewed Inductively Coupled Plasma-Atomic Emission Spectrometry, EPA/600/R-06/115. Revision 4.2, October 2003. US EPA.

69Method 1627, Kinetic Test Method for the Prediction of Mine Drainage Quality, EPA-821-R-09-002. December 2011. US EPA.

70Techniques and Methods Book 5-B1, Determination of Elements in Natural-Water, Biota, Sediment and Soil Samples Using Collision/Reaction Cell Inductively Coupled Plasma-Mass Spectrometry, Chapter 1, Section B, Methods of the National Water Quality Laboratory, Book 5, Laboratory Analysis, 2006. USGS.

71Water-Resources Investigations Report 01-4132, Methods of Analysis by the U.S. Geological Survey National Water Quality Laboratory—Determination of Organic Plus Inorganic Mercury in Filtered and Unfiltered Natural Water with Cold Vapor-Atomic Fluorescence Spectrometry, 2001. USGS.

72USGS Techniques and Methods 5-B8, Chapter 8, Section B, Methods of the National Water Quality Laboratory Book 5, Laboratory Analysis, 2011 USGS.

73NECi Method N07-0003, ”Nitrate Reductase Nitrate-Nitrogen Analysis,” Revision 9.0, March 2014, The Nitrate Elimination Co., Inc.

74Timberline Instruments, LLC Method Ammonia-001, “Determination of Inorganic Ammonia by Continuous Flow Gas Diffusion and Conductivity Cell Analysis,” June 2011, Timberline Instruments, LLC.

75Hach Company Method 10206, “Spectrophotometric Measurement of Nitrate in Water and Wastewater,” Revision 2.1, January 2013, Hach Company.

76Hach Company Method 10242, “Simplified Spectrophotometric Measurement of Total Kjeldahl Nitrogen in Water and Wastewater,” Revision 1.1, January 2013, Hach Company.

77National Council for Air and Stream Improvement (NCASI) Method TNTP-W10900, “Total (Kjeldahl) Nitrogen and Total Phosphorus in Pulp and Paper Biologically Treated Effluent by Alkaline Persulfate Digestion,” June 2011, National Council for Air and Stream Improvement, Inc.

78The pH adjusted sample is to be adjusted to 7.6 for NPDES reporting purposes.

Table IC—List of Approved Test Procedures for Non-Pesticide Organic Compounds

Open Table
Parameter1 Method EPA2 7 Standard methods ASTM Other
1. Acenaphthene GC 610
GC/MS 625.1, 1625B 6410 B-2000 See footnote,9 p. 27.
HPLC 610 6440 B-2005 D4657-92 (98)
2. Acenaphthylene GC 610
GC/MS 625.1, 1625B 6410 B-2000 See footnote,9 p. 27.
HPLC 610 6440 B-2005 D4657-92 (98)
3. Acrolein GC 603
GC/MS 624.1,4 1624B
4. Acrylonitrile GC 603
GC/MS 624.1,4 1624B
5. Anthracene GC 610
GC/MS 625.1, 1625B 6410 B-2000 See footnote,9 p. 27.
HPLC 610 6440 B-2005 D4657-92 (98)
6. Benzene GC 602 6200 C-2011
GC/MS 624.1, 1624B 6200 B-2011
7. Benzidine Spectro-photometric See footnote,3 p.1.
GC/MS 625.15, 1625B 6410 B-2000
HPLC 605
8. Benzo(a)anthracene GC 610
GC/MS 625.1, 1625B 6410 B-2000 See footnote,9 p. 27.
HPLC 610 6440 B-2005 D4657-92 (98)
9. Benzo(a)pyrene GC 610
GC/MS 625.1, 1625B 6410 B-2000 See footnote,9 p. 27.
HPLC 610 6440 B-2005 D4657-92 (98)
10. Benzo(b)fluoranthene GC 610
GC/MS 625.1, 1625B 6410 B-2000 See footnote,9 p. 27.
HPLC 610 6440 B-2005 D4657-92 (98)
11. Benzo(g,h,i)perylene GC 610
GC/MS 625.1, 1625B 6410 B-2000 See footnote,9 p. 27.
HPLC 610 6440 B-2005 D4657-92 (98)
12. Benzo(k)fluoranthene GC 610
GC/MS 625.1, 1625B 6410 B-2000 See footnote,9 p. 27.
HPLC 610 6440 B-2005 D4657-92 (98)
13. Benzyl chloride GC See footnote,3 p. 130.
GC/MS See footnote,6 p. S102.
14. Butyl benzyl phthalate GC 606
GC/MS 625.1, 1625B 6410 B-2000 See footnote,9 p. 27.
15. bis(2-Chloroethoxy) methane GC 611
GC/MS 625.1, 1625B 6410 B-2000 See footnote,9 p. 27.
16. bis(2-Chloroethyl) ether GC 611
GC/MS 625.1, 1625B 6410 B-2000 See footnote,9 p. 27.
17. bis(2-Ethylhexyl) phthalate GC 606
GC/MS 625.1, 1625B 6410 B-2000 See footnote,9 p. 27.
18. Bromodichloromethane GC 601 6200 C-2011
GC/MS 624.1, 1624B 6200 B-2011
19. Bromoform GC 601 6200 C-2011
GC/MS 624.1, 1624B 6200 B-2011
20. Bromomethane GC 601 6200 C-2011
GC/MS 624.1, 1624B 6200 B-2011
21. 4-Bromophenyl phenyl ether GC 611
GC/MS 625.1, 1625B 6410 B-2000 See footnote,9 p. 27.
22. Carbon tetrachloride GC 601 6200 C-2011 See footnote,3 p. 130.
GC/MS 624.1, 1624B 6200 B-2011
23. 4-Chloro-3-methyl phenol GC 604 6420 B-2000
GC/MS 625.1, 1625B 6410 B-2000 See footnote,9 p. 27.
24. Chlorobenzene GC 601, 602 6200 C-2011 See footnote,3 p. 130.
GC/MS 624.1, 1624B 6200 B-2011
25. Chloroethane GC 601 6200 C-2011
GC/MS 624.1, 1624B 6200 B-2011
26. 2-Chloroethylvinyl ether GC 601
GC/MS 624.1, 1624B
27. Chloroform GC 601 6200 C-2011 See footnote,3 p. 130.
GC/MS 624.1, 1624B 6200 B-2011
28. Chloromethane GC 601 6200 C-2011
GC/MS 624.1, 1624B 6200 B-2011
29. 2-Chloronaphthalene GC 612
GC/MS 625.1, 1625B 6410 B-2000 See footnote,9 p. 27.
30. 2-Chlorophenol GC 604 6420 B-2000
GC/MS 625.1, 1625B 6410 B-2000 See footnote,9 p. 27.
31. 4-Chlorophenyl phenyl ether GC 611
GC/MS 625.1, 1625B 6410 B-2000 See footnote,9 p. 27.
32. Chrysene GC 610
GC/MS 625.1, 1625B 6410 B-2000 See footnote,9 p. 27.
HPLC 610 6440 B-2005 D4657-92 (98)
33. Dibenzo(a,h)anthracene GC 610
GC/MS 625.1, 1625B 6410 B-2000 See footnote,9 p. 27.
HPLC 610 6440 B-2005 D4657-92 (98)
34. Dibromochloromethane GC 601 6200 C-2011
GC/MS 624.1, 1624B 6200 B-2011
35. 1,2-Dichlorobenzene GC 601, 602 6200 C-2011
GC/MS 624.1, 1625B 6200 B-2011 See footnote,9 p. 27.
36. 1,3-Dichlorobenzene GC 601, 602 6200 C-2011
GC/MS 624.1, 1625B 6200 B-2011 See footnote,9 p. 27.
37. 1,4-Dichlorobenzene GC 601, 602 6200 C-2011
GC/MS 624.1, 1625B 6200 B-2011 See footnote,9 p. 27.
38. 3,3'-Dichlorobenzidine GC/MS 625.1, 1625B 6410 B-2000
HPLC 605
39. Dichlorodifluoromethane GC 601
GC/MS 6200 C-2011
40. 1,1-Dichloroethane GC 601 6200 C-2011
GC/MS 624.1, 1624B 6200 B-2011
41. 1,2-Dichloroethane GC 601 6200 C-2011
GC/MS 624.1, 1624B 6200 B-2011
42. 1,1-Dichloroethene GC 601 6200 C-2011
GC/MS 624.1, 1624B 6200 B-2011
43. trans-1,2-Dichloroethene GC 601 6200 C-2011
GC/MS 624.1, 1624B 6200 B-2011
44. 2,4-Dichlorophenol GC 604 6420 B-2000
GC/MS 625.1, 1625B 6410 B-2000 See footnote,9 p. 27.
45. 1,2-Dichloropropane GC 601 6200 C-2011
GC/MS 624.1, 1624B 6200 B-2011
46. cis-1,3-Dichloropropene GC 601 6200 C-2011
GC/MS 624.1, 1624B 6200 B-2011
47. trans-1,3-Dichloropropene GC 601 6200 C-2011
GC/MS 624.1, 1624B 6200 B-2011
48. Diethyl phthalate GC 606
GC/MS 625.1, 1625B 6410 B-2000 See footnote,9 p. 27.
49. 2,4-Dimethylphenol GC 604 6420 B-2000
GC/MS 625.1, 1625B 6410 B-2000 See footnote,9 p. 27.
50. Dimethyl phthalate GC 606
GC/MS 625.1, 1625B 6410 B-2000 See footnote,9 p. 27.
51. Di-n-butyl phthalate GC 606
GC/MS 625.1, 1625B 6410 B-2000 See footnote,9 p. 27.
52. Di-n-octyl phthalate GC 606
GC/MS 625.1, 1625B 6410 B-2000 See footnote,9 p. 27.
53. 2, 4-Dinitrophenol GC 604 6420 B-2000 See footnote,9 p. 27.
GC/MS 625.1, 1625B 6410 B-2000
54. 2,4-Dinitrotoluene GC 609
GC/MS 625.1, 1625B 6410 B-2000 See footnote,9 p. 27.
55. 2,6-Dinitrotoluene GC 609
GC/MS 625.1, 1625B 6410 B-2000 See footnote,9 p. 27.
56. Epichlorohydrin GC See footnote,3 p. 130.
GC/MS See footnote,6 p. S102.
57. Ethylbenzene GC 602 6200 C-2011
GC/MS 624.1, 1624B 6200 B-2011
58. Fluoranthene GC 610
GC/MS 625.1, 1625B 6410 B-2000 See footnote,9 p. 27.
HPLC 610 6440 B-2005 D4657-92 (98)
59. Fluorene GC 610
GC/MS 625.1, 1625B 6410 B-2000 See footnote,9 p. 27.
HPLC 610 6440 B-2005 D4657-92 (98)
60. 1,2,3,4,6,7,8-Heptachloro-dibenzofuran GC/MS 1613B
61. 1,2,3,4,7,8,9-Heptachloro-dibenzofuran GC/MS 1613B
62. 1,2,3,4,6,7,8- Heptachloro-dibenzo-p-dioxin GC/MS 1613B
63. Hexachlorobenzene GC 612
GC/MS 625.1, 1625B 6410 B-2000 See footnote,9 p. 27.
64. Hexachlorobutadiene GC 612
GC/MS 625.1, 1625B 6410 B-2000 See footnote,9 p. 27.
65. Hexachlorocyclopentadiene GC 612
GC/MS 625.1,5 1625B 6410 B-2000 See footnote,9 p. 27.
66. 1,2,3,4,7,8-Hexachloro-dibenzofuran GC/MS 1613B
67. 1,2,3,6,7,8-Hexachloro-dibenzofuran GC/MS 1613B
68. 1,2,3,7,8,9-Hexachloro-dibenzofuran GC/MS 1613B
69. 2,3,4,6,7,8-Hexachloro-dibenzofuran GC/MS 1613B
70. 1,2,3,4,7,8-Hexachloro-dibenzo-p-dioxin GC/MS 1613B
71. 1,2,3,6,7,8-Hexachloro-dibenzo-p-dioxin GC/MS 1613B
72. 1,2,3,7,8,9-Hexachloro-dibenzo-p-dioxin GC/MS 1613B
73. Hexachloroethane GC 612
GC/MS 625.1, 1625B 6410 B-2000 See footnote,9 p. 27.
74. Indeno(1,2,3-c,d) pyrene GC 610
GC/MS 625.1, 1625B 6410 B-2000 See footnote,9 p. 27.
HPLC 610 6440 B-2005 D4657-92 (98)
75. Isophorone GC 609
GC/MS 625.1, 1625B 6410 B-2000 See footnote,9 p. 27.
76. Methylene chloride GC 601 6200 C-2011 See footnote,3 p. 130.
GC/MS 624.1, 1624B 6200 B-2011
77. 2-Methyl-4,6-dinitrophenol GC 604 6420 B-2000
GC/MS 625.1, 1625B 6410 B-2000 See footnote,9 p. 27.
78. Naphthalene GC 610
GC/MS 625.1, 1625B 6410 B-2000 See footnote,9 p. 27.
HPLC 610 6440 B-2005
79. Nitrobenzene GC 609
GC/MS 625.1, 1625B 6410 B-2000 See footnote,9 p. 27.
HPLC D4657-92 (98)
80. 2-Nitrophenol GC 604 6420 B-2000
GC/MS 625.1, 1625B 6410 B-2000 See footnote,9 p. 27.
81. 4-Nitrophenol GC 604 6420 B-2000
GC/MS 625.1, 1625B 6410 B-2000 See footnote,9 p. 27.
82. N-Nitrosodimethylamine GC 607
GC/MS 625.1,5 1625B 6410 B-2000 See footnote,9 p. 27.
83. N-Nitrosodi-n-propylamine GC 607
GC/MS 625.1,5 1625B 6410 B-2000 See footnote,9 p. 27.
84. N-Nitrosodiphenylamine GC 607
GC/MS 625.1,5 1625B 6410 B-2000 See footnote,9 p. 27.
85. Octachlorodibenzofuran GC/MS 1613B10
86. Octachlorodibenzo-p-dioxin GC/MS 1613B10
87. 2,2'-oxybis(1-chloropropane)12 [also known as bis(2-Chloro-1-methylethyl) ether] GC 611
GC/MS 625.1, 1625B 6410 B-2000 See footnote,9 p. 27.
88. PCB-1016 GC 608.3 See footnote,3 p. 43; See footnote.8
GC/MS 625.1 6410 B-2000
89. PCB-1221 GC 608.3 See footnote,3 p. 43; See footnote.8
GC/MS 625.1 6410 B-2000
90. PCB-1232 GC 608.3 See footnote,3 p. 43; See footnote.8
GC/MS 625.1 6410 B-2000
91. PCB-1242 GC 608.3 See footnote,3 p. 43; See footnote.8
GC/MS 625.1 6410 B-2000
92. PCB-1248 GC 608.3 See footnote,3 p. 43; See footnote.8
GC/MS 625.1 6410 B-2000
93. PCB-1254 GC 608.3 See footnote,3 p. 43; See footnote.8
GC/MS 625.1 6410 B-2000
94. PCB-1260 GC 608.3 See footnote,3 p. 43; See footnote.8
GC/MS 625.1 6410 B-2000
95. 1,2,3,7,8-Pentachloro-dibenzofuran GC/MS 1613B
96. 2,3,4,7,8-Pentachloro-dibenzofuran GC/MS 1613B
97. 1,2,3,7,8,-Pentachloro-dibenzo-p-dioxin GC/MS 1613B
98. Pentachlorophenol GC 604 6420 B-2000 See footnote,3 p. 140.
GC/MS 625.1, 1625B 6410 B-2000 See footnote,9 p. 27.
99. Phenanthrene GC 610
GC/MS 625.1, 1625B 6410 B-2000 See footnote,9 p. 27.
HPLC 610 6440 B-2005 D4657-92 (98)
100. Phenol GC 604 6420 B-2000
GC/MS 625.1, 1625B 6410 B-2000 See footnote,9 p. 27.
101. Pyrene GC 610
GC/MS 625.1, 1625B 6410 B-2000 See footnote,9 p. 27.
HPLC 610 6440 B-2005 D4657-92 (98)
102. 2,3,7,8-Tetrachloro-dibenzofuran GC/MS 1613B10
103. 2,3,7,8-Tetrachloro-dibenzo-p-dioxin GC/MS 613, 625.1,5a 1613B
104. 1,1,2,2-Tetrachloroethane GC 601 6200 C-2011 See footnote,3 p. 130.
GC/MS 624.1, 1624B 6200 B-2011
105. Tetrachloroethene GC 601 6200 C-2011 See footnote,3 p. 130.
GC/MS 624.1, 1624B 6200 B-2011
106. Toluene GC 602 6200 C-2011
GC/MS 624.1, 1624B 6200 B-2011
107. 1,2,4-Trichlorobenzene GC 612 See footnote,3 p. 130.
GC/MS 625.1, 1625B 6410 B-2000 See footnote,9 p. 27.
108. 1,1,1-Trichloroethane GC 601 6200 C-2011
GC/MS 624.1, 1624B 6200 B-2011
109. 1,1,2-Trichloroethane GC 601 6200 C-2011 See footnote,3 p. 130.
GC/MS 624.1, 1624B 6200 B-2011
110. Trichloroethene GC 601 6200 C-2011
GC/MS 624.1, 1624B 6200 B-2011
111. Trichlorofluoromethane GC 601 6200 C-2011
GC/MS 624.1 6200 B-2011
112. 2,4,6-Trichlorophenol GC 604 6420 B-2000
GC/MS 625.1, 1625B 6410 B-2000 See footnote,9 p. 27.
113. Vinyl chloride GC 601 6200 C-2011
GC/MS 624.1, 1624B 6200 B-2011
114. Nonylphenol GC/MS D7065-11
115. Bisphenol A (BPA) GC/MS D7065-11
116. p-tert-Octylphenol (OP) GC/MS D7065-11
117. Nonylphenol Monoethoxylate (NP1EO) GC/MS D7065-11
118. Nonylphenol Diethoxylate (NP2EO) GC/MS D7065-11
119. Adsorbable Organic Halides (AOX) Adsorption and Coulometric Titration 165011
120. Chlorinated Phenolics In Situ Acetylation and GC/MS 165311

Table IC notes:

1 All parameters are expressed in micrograms per liter (µg/L) except for Method 1613B, in which the parameters are expressed in picograms per liter (pg/L).

2 The full text of Methods 601-613, 1613B, 1624B, and 1625B are provided at appendix A, Test Procedures for Analysis of Organic Pollutants. The standardized test procedure to be used to determine the method detection limit (MDL) for these test procedures is given at appendix B of this part, Definition and Procedure for the Determination of the Method Detection Limit. These methods are available at: https://www.epa.gov/cwa-methods as individual PDF files.

3 Methods for Benzidine: Chlorinated Organic Compounds, Pentachlorophenol and Pesticides in Water and Wastewater. September 1978. U.S. EPA.

4 Method 624.1 may be used for quantitative determination of acrolein and acrylonitrile, provided that the laboratory has documentation to substantiate the ability to detect and quantify these analytes at levels necessary to comply with any associated regulations. In addition, the use of sample introduction techniques other than simple purge-and-trap may be required. QC acceptance criteria from Method 603 should be used when analyzing samples for acrolein and acrylonitrile in the absence of such criteria in Method 624.1.

5 Method 625.1 may be extended to include benzidine, hexachlorocyclopentadiene, N-nitrosodimethylamine, N-nitrosodi-n-propylamine, and N-nitrosodiphenylamine. However, when they are known to be present, Methods 605, 607, and 612, or Method 1625B, are preferred methods for these compounds.

5a Method 625.1 screening only.

6 Selected Analytical Methods Approved and Cited by the United States Environmental Protection Agency, Supplement to the 15th Edition of Standard Methods for the Examination of Water and Wastewater. 1981. American Public Health Association (APHA).

7 Each analyst must make an initial, one-time demonstration of their ability to generate acceptable precision and accuracy with Methods 601-603, 1624B, and 1625B in accordance with procedures each in Section 8.2 of each of these Methods. Additionally, each laboratory, on an on-going basis must spike and analyze 10% (5% for Methods 624.1 and 625.1 and 100% for methods 1624B and 1625B) of all samples to monitor and evaluate laboratory data quality in accordance with Sections 8.3 and 8.4 of these methods. When the recovery of any parameter falls outside the quality control (QC) acceptance criteria in the pertinent method, analytical results for that parameter in the unspiked sample are suspect. The results should be reported but cannot be used to demonstrate regulatory compliance. If the method does not contain QC acceptance criteria, control limits of ± three standard deviations around the mean of a minimum of five replicate measurements must be used. These quality control requirements also apply to the Standard Methods, ASTM Methods, and other methods cited.

8 Organochlorine Pesticides and PCBs in Wastewater Using EmporeTM Disk. Revised October 28, 1994. 3M Corporation.

9 Method O-3116-87 is in Open File Report 93-125, Methods of Analysis by U.S. Geological Survey National Water Quality Laboratory—Determination of Inorganic and Organic Constituents in Water and Fluvial Sediments. 1993. USGS.

10 Analysts may use Fluid Management Systems, Inc. Power-Prep system in place of manual cleanup provided the analyst meets the requirements of Method 1613B (as specified in Section 9 of the method) and permitting authorities. Method 1613, Revision B, Tetra- through Octa-Chlorinated Dioxins and Furans by Isotope Dilution HRGC/HRMS. Revision B, 1994. U.S. EPA. The full text of this method is provided in appendix A to this part and at https://www.epa.gov/cwa-methods/approved-cwa-methods-organic-compounds.

11 Method 1650, Adsorbable Organic Halides by Adsorption and Coulometric Titration. Revision C, 1997 U.S. EPA. Method 1653, Chlorinated Phenolics in Wastewater by In Situ Acetylation and GCMS. Revision A, 1997 U.S. EPA. The full text for both of these methods is provided at appendix A in part 430 of this chapter, The Pulp, Paper, and Paperboard Point Source Category.

12 The compound was formerly inaccurately labeled as 2,2'-oxybis(2-chloropropane) and bis(2-chloroisopropyl) ether. Some versions of Methods 611, and 1625 inaccurately list the analyte as “bis(2-chloroisopropyl)ether,” but use the correct CAS number of 108-60-1.

Table ID—List of Approved Test Procedures for Pesticides1

Open Table
Parameter Method EPA2 7 10 Standard methods ASTM Other
1. Aldrin GC 617, 608.3 6630 B-2007 & C-2007 D3086-90, D5812-96 (02) See footnote,3 p. 7; See footnote,4 O-3104-83; See footnote,8 3M0222.
    GC/MS 625.1 6410 B-2000
2. Ametryn GC 507, 619 See footnote,3 p. 83; See footnote,9 O-3106-93; See footnote,6 p. S68.
    GC/MS 525.2, 625.1 See footnote,14 O-1121-91.
3. Aminocarb TLC See footnote,3 p. 94; See footnote,6 p. S60.
    HPLC 632
4. Atraton GC 619 See footnote,3 p. 83; See footnote,6 p. S68.
    GC/MS 625.1
5. Atrazine GC 507, 619, 608.3 See footnote,3 p. 83; See footnote,6 p. S68; See footnote,9 O-3106-93.
    HPLC/MS See footnote,12 O-2060-01.
    GC/MS 525.1, 525.2, 625.1 See footnote,11 O-1126-95.
6. Azinphos methyl GC 614, 622, 1657 See footnote,3 p. 25; See footnote,6 p. S51.
    GC/MS 625.1 See footnote,11 O-1126-95.
7. Barban TLC See footnote,3 p. 104; See footnote,6 p. S64.
    HPLC 632
    GC/MS 625.1
8. α-BHC GC 617, 608.3 6630 B-2007 & C-2007 D3086-90, D5812-96(02) See footnote,3 p. 7; See footnote,8 3M0222.
    GC/MS 625.15 6410 B-2000 See footnote,11 O-1126-95.
9. β-BHC GC 617, 608.3 6630 B-2007 & C-2007 D3086-90, D5812-96(02) See footnote,8 3M0222.
    GC/MS 625.1 6410 B-2000
10. δ-BHC GC 617, 608.3 6630 B-2007 & C-2007 D3086-90, D5812-96(02) See footnote,8 3M0222.
    GC/MS 625.1 6410 B-2000
11. γ-BHC (Lindane) GC 617, 608.3 6630 B-2007 & C-2007 D3086-90, D5812-96(02) See footnote,3 p. 7; See footnote,4 O-3104-83; See footnote,8 3M0222.
    GC/MS 625.15 6410 B-2000 See footnote,11 O-1126-95.
12. Captan GC 617, 608.3 6630 B-2007 D3086-90, D5812-96(02) See footnote,3 p. 7.
13. Carbaryl TLC See footnote,3 p. 94, See footnote,6 p. S60.
    HPLC 531.1, 632
    HPLC/MS 553 See footnote,12 O-2060-01.
    GC/MS 625.1 See footnote,11 O-1126-95.
14. Carbophenothion GC 617, 608.3 6630 B-2007 See footnote,4 page 27; See footnote,6 p. S73.
    GC/MS 625.1
15. Chlordane GC 617, 608.3 6630 B-2007 & C-2007 D3086-90, D5812-96(02) See footnote,3 p. 7; See footnote,4 O-3104-83; See footnote,8 3M0222.
    GC/MS 625.1 6410 B-2000
16. Chloropropham TLC See footnote,3 p. 104; See footnote,6 p. S64.
    HPLC 632
    GC/MS 625.1
17. 2,4-D GC 615 6640 B-2006 See footnote,3 p. 115; See footnote,4 O-3105-83.
    HPLC/MS See footnote,12 O-2060-01.
18. 4,4-DDD GC 617, 608.3 6630 B-2007 & C-2007 D3086-90, D5812-96(02) See footnote,3 p. 7; See footnote,4 O-3105-83; See footnote,8 3M0222.
    GC/MS 625.1 6410 B-2000
19. 4,4-DDE GC 617, 608.3 6630 B-2007 & C-2007 D3086-90, D5812-96(02) See footnote,3 p. 7; See footnote,4 O-3104-83; See footnote,8 3M0222.
    GC/MS 625.1 6410 B-2000 See footnote,11 O-1126-95.
20. 4,4-DDT GC 617, 608.3 6630 B-2007 & C-2007 D3086-90, D5812-96(02) See footnote,3 p. 7; See footnote,4 O-3104-83; See footnote,8 3M0222.
    GC/MS 625.1 6410 B-2000
21. Demeton-O GC 614, 622 See footnote,3 p. 25; See footnote,6 p. S51.
    GC/MS 625.1
22. Demeton-S GC 614, 622 See footnote,3 p. 25; See footnote,6 p. S51.
    GC/MS 625.1
23. Diazinon GC 507, 614, 622, 1657 See footnote,3 p. 25; See footnote,4 O-3104-83; See footnote,6 p. S51.
    GC/MS 525.2, 625.1 See footnote,11 O-1126-95.
24. Dicamba GC 615 See footnote,3 p. 115.
    HPLC/MS See footnote,12 O-2060-01.
25. Dichlofenthion GC 622.1 See footnote,4 page 27; See footnote,6 p. S73.
26. Dichloran GC 608.2, 617, 608.3 6630 B-2007 See footnote,3 p. 7.
27. Dicofol GC 617, 608.3 See footnote,4 O-3104-83.
28. Dieldrin GC 617, 608.3 6630 B-2007 & C-2007 D3086-90, D5812-96(02) See footnote,3 p. 7; See footnote,4 O-3104-83; See footnote,8 3M0222.
    GC/MS 625.1 6410 B-2000 See footnote,11 O-1126-95.
29. Dioxathion GC 614.1, 1657 See footnote,4 page 27; See footnote,6 p. S73.
30. Disulfoton GC 507, 614, 622, 1657 See footnote,3 p. 25; See footnote,6 p. S51.
    GC/MS 525.2, 625.1 See footnote,11 O-1126-95.
31. Diuron TLC See footnote,3 p. 104; See footnote,6 p. S64.
    HPLC 632
    HPLC/MS 553 See footnote,12 O-2060-01.
32. Endosulfan I GC 617, 608.3 6630 B-2007 & C-2007 D3086-90, D5812-96(02) See footnote,3 p. 7; See footnote,4 O-3104-83; See footnote,8 3M0222).
    GC/MS 625.15 6410 B-2000 See footnote,13 O-2002-01.
33. Endosulfan II GC 617, 608.3 6630 B-2007 & C-2007 D3086-90, D5812-96(02) See footnote,3 p. 7; See footnote,8 3M0222.
    GC/MS 625.15 6410 B-2000 See footnote,13 O-2002-01.
34. Endosulfan Sulfate GC 617, 608.3 6630 C-2007 See footnote,8 3M0222.
    GC/MS 625.1 6410 B-2000
35. Endrin GC 505, 508, 617, 1656, 608.3 6630 B-2007 & C-2007 D3086-90, D5812-96(02) See footnote,3 p. 7; See footnote,4 O-3104-83; See footnote,8 3M0222.
    GC/MS 525.1, 525.2, 625.15 6410 B-2000
36. Endrin aldehyde GC 617, 608.3 6630 C-2007 See footnote,8 3M0222.
    GC/MS 625.1
37. Ethion GC 614, 614.1, 1657 See footnote,4 page 27; See footnote,6 p. S73.
    GC/MS 625.1 See footnote,13 O-2002-01.
38. Fenuron TLC See footnote,3 p. 104; See footnote,6 p. S64.
    HPLC 632
    HPLC/MS See footnote,12 O-2060-01.
39. Fenuron-TCA TLC See footnote,3 p. 104; See footnote,6 p. S64.
    HPLC 632
40. Heptachlor GC 505, 508, 617, 1656, 608.3 6630 B-2007 & C-2007 D3086-90, D5812-96(02) See footnote,3 p. 7; See footnote,4 O-3104-83; See footnote,8 3M0222.
    GC/MS 525.1, 525.2, 625.1 6410 B-2000
41. Heptachlor epoxide GC 617, 608.3 6630 B-2007 & C-2007 D3086-90, D5812-96(02) See footnote,3 p. 7; See footnote,4 O-3104-83; See footnote,6 p. S73; See footnote,8 3M0222.
    GC/MS 625.1 6410 B-2000
42. Isodrin GC 617, 608.3 6630 B-2007 & C-2007 See footnote,4 O-3104-83; See footnote,6 p. S73.
    GC/MS 625.1
43. Linuron GC See footnote,3 p. 104; See footnote,6 p. S64.
    HPLC 632
    HPLC/MS 553 See footnote,12 O-2060-01.
    GC/MS See footnote,11 O-1126-95.
44. Malathion GC 614, 1657 6630 B-2007 See footnote,3 p. 25; See footnote,6 p. S51.
    GC/MS 625.1 See footnote,11 O-1126-95.
45. Methiocarb TLC See footnote,3 p. 94; See footnote,6 p. S60.
    HPLC 632
    HPLC/MS See footnote,12 O-2060-01.
46. Methoxychlor GC 505, 508, 608.2, 617, 1656, 608.3 6630 B-2007 & C-2007 D3086-90, D5812-96(02) See footnote,3 p. 7; See footnote,4 O-3104-83; See footnote,8 3M0222.
    GC/MS 525.1, 525.2, 625.1 See footnote,11 O-1126-95.
47. Mexacarbate TLC See footnote,3 p. 94; See footnote,6 p. S60.
    HPLC 632
    GC/MS 625.1
48. Mirex GC 617, 608.3 6630 B-2007 & C-2007 D3086-90, D5812-96(02) See footnote,3 p. 7; See footnote,4 O-3104-83.
    GC/MS 625.1
49. Monuron TLC See footnote,3 p. 104; See footnote,6 p. S64.
    HPLC 632
50. Monuron-TCA TLC See footnote,3 p. 104; See footnote,6 p. S64.
    HPLC 632
51. Neburon TLC See footnote,3 p. 104; See footnote,6 p. S64.
    HPLC 632
    HPLC/MS See footnote,12 O-2060-01.
52. Parathion methyl GC 614, 622, 1657 6630 B-2007 See footnote,4 page 27; See footnote,3 p. 25.
    GC/MS 625.1 See footnote,11 O-1126-95.
53. Parathion ethyl GC 614 6630 B-2007 See footnote,4 page 27; See footnote,3 p. 25.
    GC/MS See footnote,11 O-1126-95.
54. PCNB GC 608.1, 617, 608.3 6630 B-2007 & C-2007 D3086-90, D5812-96(02) See footnote,3 p. 7.
55. Perthane GC 617, 608.3 D3086-90, D5812-96(02) See footnote,4 O-3104-83.
56. Prometon GC 507, 619 See footnote,3 p. 83; See footnote,6 p. S68; See footnote,9 O-3106-93.
    GC/MS 525.2, 625.1 See footnote,11 O-1126-95.
57. Prometryn GC 507, 619 See footnote,3 p. 83; See footnote,6 p. S68; See footnote,9 O-3106-93.
    GC/MS 525.1, 525.2, 625.1 See footnote,13 O-2002-01.
58. Propazine GC 507, 619, 1656, 608.3 See footnote,3 p. 83; See footnote,6 p. S68; See footnote,9 O-3106-93.
    GC/MS 525.1, 525.2, 625.1
59. Propham TLC See footnote,3 p. 104; See footnote,6 p. S64.
    HPLC 632
    HPLC/MS See footnote,12 O-2060-01.
60. Propoxur TLC See footnote,3 p. 94; See footnote,6 p. S60.
    HPLC 632
61. Secbumeton TLC See footnote,3 p. 83; See footnote,6 p. S68.
    GC 619
62. Siduron TLC See footnote,3 p. 104; See footnote,6 p. S64.
    HPLC 632
    HPLC/MS See footnote,12 O-2060-01.
63. Simazine GC 505, 507, 619, 1656, 608.3 See footnote,3 p. 83; See footnote,6 p. S68; See footnote,9 O-3106-93.
    GC/MS 525.1, 525.2, 625.1 See footnote,11 O-1126-95.
64. Strobane GC 617, 608.3 6630 B-2007 & C-2007 See footnote,3 p. 7.
65. Swep TLC See footnote,3 p. 104; See footnote,6 p. S64.
    HPLC 632
66. 2,4,5-T GC 615 6640 B-2006 See footnote,3 p. 115; See footnote,4 O-3105-83.
67. 2,4,5-TP (Silvex) GC 615 6640 B-2006 See footnote,3 p. 115; See footnote,4 O-3105-83.
68. Terbuthylazine GC 619, 1656, 608.3 See footnote,3 p. 83; See footnote,6 p. S68.
    GC/MS See footnote,13 O-2002-01.
69. Toxaphene GC 505, 508, 617, 1656, 608.3 6630 B-2007 & C-2007 D3086-90, D5812-96(02) See footnote,3 p. 7; See footnote;8 See footnote,4 O-3105-83.
    GC/MS 525.1, 525.2, 625.1 6410 B-2000
70. Trifluralin GC 508, 617, 627, 1656, 608.3 6630 B-2007 See footnote,3 p. 7; See footnote,9 O-3106-93.
    GC/MS 525.2, 625.1 See footnote,11 O-1126-95.

Table ID notes:

1Pesticides are listed in this table by common name for the convenience of the reader. Additional pesticides may be found under Table IC of this section, where entries are listed by chemical name.

2The standardized test procedure to be used to determine the method detection limit (MDL) for these test procedures is given at appendix B of this part, Definition and Procedure for the Determination of the Method Detection Limit.

3Methods for Benzidine, Chlorinated Organic Compounds, Pentachlorophenol and Pesticides in Water and Wastewater. September 1978. U.S. EPA. This EPA publication includes thin-layer chromatography (TLC) methods.

4Methods for the Determination of Organic Substances in Water and Fluvial Sediments, Techniques of Water-Resources Investigations of the U.S. Geological Survey, Book 5, Chapter A3. 1987. USGS.

5The method may be extended to include α-BHC, γ-BHC, endosulfan I, endosulfan II, and endrin. However, when they are known to exist, Method 608.3 is the preferred method.

6Selected Analytical Methods Approved and Cited by the United States Environmental Protection Agency, Supplement to the 15th Edition of Standard Methods for the Examination of Water and Wastewater. 1981. American Public Health Association (APHA).

7Each analyst must make an initial, one-time, demonstration of their ability to generate acceptable precision and accuracy with Methods 608.3 and 625.1 in accordance with procedures given in Section 8.2 of each of these methods. Additionally, each laboratory, on an on-going basis, must spike and analyze 5% of all samples analyzed with Method 608.3 or 5% of all samples analyzed with Method 625.1 to monitor and evaluate laboratory data quality in accordance with Sections 8.3 and 8.4 of these methods. When the recovery of any parameter falls outside the warning limits, the analytical results for that parameter in the unspiked sample are suspect. The results should be reported, but cannot be used to demonstrate regulatory compliance. These quality control requirements also apply to the Standard Methods, ASTM Methods, and other methods cited.

8Organochlorine Pesticides and PCBs in Wastewater Using EmporeTM Disk. Revised October 28, 1994. 3M Corporation.

9Method O-3106-93 is in Open File Report 94-37, Methods of Analysis by the U.S. Geological Survey National Water Quality Laboratory—Determination of Triazine and Other Nitrogen-Containing Compounds by Gas Chromatography With Nitrogen Phosphorus Detectors. 1994. USGS.

10EPA Methods 608.1, 608.2, 614, 614.1, 615, 617, 619, 622, 622.1, 627, and 632 are found in Methods for the Determination of Nonconventional Pesticides in Municipal and Industrial Wastewater, EPA 821-R-92-002, April 1992, U.S. EPA. EPA Methods 505, 507, 508, 525.1, 531.1 and 553 are in Methods for the Determination of Nonconventional Pesticides in Municipal and Industrial Wastewater, Volume II, EPA 821-R-93-010B, 1993, U.S. EPA. EPA Method 525.2 is in Determination of Organic Compounds in Drinking Water by Liquid-Solid Extraction and Capillary Column Gas Chromatography/Mass Spectrometry, Revision 2.0, 1995, U.S. EPA. EPA methods 1656 and 1657 are in Methods for the Determination of Nonconventional Pesticides in Municipal and Industrial Wastewater, Volume I, EPA 821-R-93-010A, 1993, U.S. EPA. Methods 608.3 and 625.1 are available at https://www.epa.gov/cwa-methods/approved-cwa-test-methods-organic-compounds.

11Method O-1126-95 is in Open-File Report 95-181, Methods of Analysis by the U.S. Geological Survey National Water Quality Laboratory—Determination of pesticides in water by C-18 solid-phase extraction and capillary-column gas chromatography/mass spectrometry with selected-ion monitoring. 1995. USGS.

12Method O-2060-01 is in Water-Resources Investigations Report 01-4134, Methods of Analysis by the U.S. Geological Survey National Water Quality Laboratory—Determination of Pesticides in Water by Graphitized Carbon-Based Solid-Phase Extraction and High-Performance Liquid Chromatography/Mass Spectrometry. 2001. USGS.

13Method O-2002-01 is in Water-Resources Investigations Report 01-4098, Methods of Analysis by the U.S. Geological Survey National Water Quality Laboratory—Determination of moderate-use pesticides in water by C-18 solid-phase extraction and capillary-column gas chromatography/mass spectrometry. 2001. USGS.

14Method O-1121-91 is in Open-File Report 91-519, Methods of Analysis by the U.S. Geological Survey National Water Quality Laboratory—Determination of organonitrogen herbicides in water by solid-phase extraction and capillary-column gas chromatography/mass spectrometry with selected-ion monitoring. 1992. USGS.

Table IE—List of Approved Radiologic Test Test Procedures

Open Table
Parameter and units Method Reference (method number or page)
EPA1 Standard Methods 18th, 19th, 20th Ed. Standard Methods Online ASTM USGS2
1. Alpha-Total, pCi per liter Proportional or scintillation counter 900.0 7110 B 7110 B-00 D1943-90, 96 pp. 75 and 783
2. Alpha-Counting error, pCi per liter Proportional or scintillation counter Appendix B 7110 B 7110 B-00 D1943-90, 96 p. 79
3. Beta-Total, pCi per liter Proportional counter 900.0 7110 B 7110 B-00 D1890-90, 96 pp. 75 and 783
4. Beta-Counting error, pCi Proportional counter Appendix B 7110 B 7110 B-00 D1890-90, 96 p. 79
5. (a) Radium Total pCi per liter
(b) Ra, pCi per liter
Proportional counter 903.0 7500-Ra B 7500-Ra B-01 D2460-90, 97
    Scintillation counter 903.1 7500-Ra C 7500-Ra C-01 D3454-91, 97 p. 81

1Prescribed Procedures for Measurement of Radioactivity in Drinking Water, EPA-600/4-80-032 (1980), U.S. Environmental Protection Agency, August 1980.

2Fishman, M. J. and Brown, Eugene, “Selected Methods of the U.S. Geological Survey of Analysis of Wastewaters,” U.S. Geological Survey, Open-File Report 76-177 (1976).

3The method found on p. 75 measures only the dissolved portion while the method on p. 78 measures only the suspended portion. Therefore, the two results must be added to obtain the “total.”

Table IF—List of Approved Methods for Pharmaceutical Pollutants

Open Table
Pharmaceuticals pollutants CAS registry No. Analytical method number
Acetonitrile 75-05-8 1666/1671/D3371/D3695/624.1
n-Amyl acetate 628-63-7 1666/D3695
n-Amyl alcohol 71-41-0 1666/D3695
Benzene 71-43-2 D4763/D3695/502.2/524.2/624.1
n-Butyl-acetate 123-86-4 1666/D3695
tert-Butyl alcohol 75-65-0 1666/624.1
Chlorobenzene 108-90-7 502.2/524.2/624.1
Chloroform 67-66-3 502.2/524.2/551/624.1
o-Dichlorobenzene 95-50-1 1625C/502.2/524.2/624.1
1,2-Dichloroethane 107-06-2 D3695/502.2/524.2/624.1
Diethylamine 109-89-7 1666/1671
Dimethyl sulfoxide 67-68-5 1666/1671
Ethanol 64-17-5 1666/1671/D3695/624.1
Ethyl acetate 141-78-6 1666/D3695/624.1
n-Heptane 142-82-5 1666/D3695
n-Hexane 110-54-3 1666/D3695
Isobutyraldehyde 78-84-2 1666/1667
Isopropanol 67-63-0 1666/D3695
Isopropyl acetate 108-21-4 1666/D3695
Isopropyl ether 108-20-3 1666/D3695
Methanol 67-56-1 1666/1671/D3695/624.1
Methyl Cellosolve® (2-Methoxy ethanol) 109-86-4 1666/1671
Methylene chloride 75-09-2 502.2/524.2/624.1
Methyl formate 107-31-3 1666
4-Methyl-2-pentanone (MIBK) 108-10-1 1624C/1666/D3695/D4763/524.2/624.1
Phenol 108-95-2 D4763
n-Propanol 71-23-8 1666/1671/D3695/624.1
2-Propanone (Acetone) 67-64-1 D3695/D4763/524.2/624.1
Tetrahydrofuran 109-99-9 1666/524.2/624.1
Toluene 108-88-3 D3695/D4763/502.2/524.2/624.1
Triethlyamine 121-44-8 1666/1671
Xylenes (Note 1) 1624C/1666/624.1

Table IF note:

11624C: m-xylene 108-38-3, o,p-xylene, E-14095 (Not a CAS number; this is the number provided in the Environmental Monitoring Methods Index [EMMI] database.); 1666: m,p-xylene 136777-61-2, o-xylene 95-47-6.

Table IG—Test Methods for Pesticide Active Ingredients

[40 CFR part 455]

Open Table
EPA survey code Pesticide name CAS No. EPA analytical method No.(s)3
8 Triadimefon 43121-43-3 507/633/525.1/525.2/1656/625.1.
12 Dichlorvos 62-73-7 1657/507/622/525.1/525.2/625.1.
16 2,4-D; 2,4-D Salts and Esters [2,4-Dichloro-phenoxyacetic acid] 94-75-7 1658/515.1/615/515.2/555.
17 2,4-DB; 2,4-DB Salts and Esters [2,4-Dichlorophenoxybutyric acid] 94-82-6 1658/515.1/615/515.2/555.
22 Mevinphos 7786-34-7 1657/507/622/525.1/525.2/625.1.
25 Cyanazine 21725-46-2 629/507/608.3/625.1.
26 Propachlor 1918-16-7 1656/508/608.1/525.1/525.2/608.3/625.1.
27 MCPA; MCPA Salts and Esters
[2-Methyl-4-chlorophenoxyacetic acid]
94-74-6 1658/615/555.
30 Dichlorprop; Dichlorprop Salts and Esters [2-(2,4-Dichlorophenoxy) propionic acid] 120-36-5 1658/515.1/615/515.2/555.
31 MCPP; MCPP Salts and Esters [2-(2-Methyl-4-chlorophenoxy) propionic acid] 93-65-2 1658/615/555.
35 TCMTB [2-(Thiocyanomethylthio) benzo-thiazole] 21564-17-0 637.
39 Pronamide 23950-58-5 525.1/525.2/507/633.1/625.1.
41 Propanil 709-98-8 632.1/1656/608.3.
45 Metribuzin 21087-64-9 507/633/525.1/525.2/1656/608.3/625.1.
52 Acephate 30560-19-1 1656/1657/608.3.
53 Acifluorfen 50594-66-6 515.1/515.2/555.
54 Alachlor 15972-60-8 505/507/645/525.1/525.2/1656/608.3/625.1.
55 Aldicarb 116-06-3 531.1.
58 Ametryn 834-12-8 507/619/525.2/625.1.
60 Atrazine 1912-24-9 505/507/619/525.1/525.2/1656/ 608.3/625.1.
62 Benomyl 17804-35-2 631.
68 Bromacil; Bromacil Salts and Esters 314-40-9 507/633/525.1/525.2/1656/608.3/625.1.
69 Bromoxynil 1689-84-5 1625/1661/625.1.
69 Bromoxynil Octanoate 1689-99-2 1656/608.3.
70 Butachlor 23184-66-9 507/645/525.1/525.2/1656/608.3/625.1.
73 Captafol 2425-06-1 1656/608.3/625.1.
75 Carbaryl [Sevin] 63-25-2 531.1/632/553/625.1.
76 Carbofuran 1563-66-2 531.1/632/625.1.
80 Chloroneb 2675-77-6 1656/508/608.1/525.1/525.2/608.3/625.1.
82 Chlorothalonil 1897-45-6 508/608.2/525.1/525.2/1656/608.3/625.1.
84 Stirofos 961-11-5 1657/507/622/525.1/525.2/625.1.
86 Chlorpyrifos 2921-88-2 1657/508/622/625.1.
90 Fenvalerate 51630-58-1 1660.
103 Diazinon 333-41-5 1657/507/614/622/525.2/625.1.
107 Parathion methyl 298-00-0 1657/614/622/625.1.
110 DCPA [Dimethyl 2,3,5,6-tetrachloro-terephthalate] 1861-32-1 508/608.2/525.1/525.2/515.12/515.22/1656/608.3/625.1.
112 Dinoseb 88-85-7 1658/515.1/615/515.2/555/625.1.
113 Dioxathion 78-34-2 1657/614.1.
118 Nabonate [Disodium cyanodithio-imidocarbonate] 138-93-2 630.1.
119 Diuron 330-54-1 632/553.
123 Endothall 145-73-3 548/548.1.
124 Endrin 72-20-8 1656/505/508/617/525.1/525.2/608.3/625.1.
125 Ethalfluralin 55283-68-6 1656/627/608.3 See footnote 1.
126 Ethion 563-12-2 1657/614/614.1/625.1.
127 Ethoprop 13194-48-4 1657/507/622/525.1/525.2/625.1.
132 Fenarimol 60168-88-9 507/633.1/525.1/525.2/1656/608.3/625.1.
133 Fenthion 55-38-9 1657/622/625.1.
138 Glyphosate [N-(Phosphonomethyl) glycine] 1071-83-6 547.
140 Heptachlor 76-44-8 1656/505/508/617/525.1/525.2/608.3/625.1.
144 Isopropalin 33820-53-0 1656/627/608.3.
148 Linuron 330-55-2 553/632.
150 Malathion 121-75-5 1657/614/625.1.
154 Methamidophos 10265-92-6 1657.
156 Methomyl 16752-77-5 531.1/632.
158 Methoxychlor 72-43-5 1656/505/508/608.2/617/525.1/525.2/608.3/625.1.
172 Nabam 142-59-6 630/630.1.
173 Naled 300-76-5 1657/622/625.1.
175 Norflurazon 27314-13-2 507/645/525.1/525.2/1656/608.3/625.1.
178 Benfluralin 1861-40-1 1656/627/608.3 See footnote 1.
182 Fensulfothion 115-90-2 1657/622/625.1.
183 Disulfoton 298-04-4 1657/507/614/622/525.2/625.1.
185 Phosmet 732-11-6 1657/622.1/625.1.
186 Azinphos Methyl 86-50-0 1657/614/622/625.1.
192 Organo-tin pesticides 12379-54-3 Ind-01/200.7/200.9.
197 Bolstar 35400-43-2 1657/622.
203 Parathion 56-38-2 1657/614/625.1.
204 Pendimethalin 40487-42-1 1656.
205 Pentachloronitrobenzene 82-68-8 1656/608.1/617/608.3/625.1.
206 Pentachlorophenol 87-86-5 1625/515.2/555/515.1/525.1/525.2/625.1.
208 Permethrin 52645-53-1 608.2/508/525.1/525.2/1656/1660/608.34/625.14.
212 Phorate 298-02-2 1657/622/625.1.
218 Busan 85 [Potassium dimethyldithiocarbamate] 128-03-0 630/630.1.
219 Busan 40 [Potassium N-hydroxymethyl-N-methyldithiocarbamate] 51026-28-9 630/630.1.
220 KN Methyl [Potassium N-methyl-dithiocarbamate] 137-41-7 630/630.1.
223 Prometon 1610-18-0 507/619/525.2/625.1.
224 Prometryn 7287-19-6 507/619/525.1/525.2/625.1.
226 Propazine 139-40-2 507/619/525.1/525.2/1656/608.3/625.1.
230 Pyrethrin I 121-21-1 1660.
232 Pyrethrin II 121-29-9 1660.
236 DEF [S,S,S-Tributyl phosphorotrithioate] 78-48-8 1657.
239 Simazine 122-34-9 505/507/619/525.1/525.2/1656/608.3/625.1.
241 Carbam-S [Sodium dimethyldithio-carbamate] 128-04-1 630/630.1.
243 Vapam [Sodium methyldithiocarbamate] 137-42-8 630/630.1.
252 Tebuthiuron 34014-18-1 507/525.1/525.2/625.1.
254 Terbacil 5902-51-2 507/633/525.1/525.2/1656/608.3/625.1.
255 Terbufos 13071-79-9 1657/507/614.1/525.1/525.2/625.1.
256 Terbuthylazine 5915-41-3 619/1656/608.3.
257 Terbutryn 886-50-0 507/619/525.1/525.2/625.1.
259 Dazomet 533-74-4 630/630.1/1659.
262 Toxaphene 8001-35-2 1656/505/508/617/525.1/525.2/608.3/625.1.
263 Merphos [Tributyl phosphorotrithioate] 150-50-5 1657/507/525.1/525.2/622/625.1.
264 Trifluralin1 1582-09-8 1656/508/617/627/525.2/608.3/625.1.
268 Ziram [Zinc dimethyldithiocarbamate] 137-30-4 630/630.1.

Table IG notes:

1Monitor and report as total Trifluralin.

2Applicable to the analysis of DCPA degradates.

3EPA Methods 608.1 through 645, 1645 through 1661, and Ind-01 are available in Methods for the Determination of Nonconventional Pesticides in Municipal and Industrial Wastewater, Volume I, EPA 821-R-93-010A, Revision I, August 1993, U.S. EPA. EPA Methods 200.9 and 505 through 555 are available in Methods for the Determination of Nonconventional Pesticides in Municipal and Industrial Wastewater, Volume II, EPA 821-R-93-010B, August 1993, U.S. EPA. The full text of Methods 608.3, 625.1, and 1625 are provided at appendix A of this part. The full text of Method 200.7 is provided at appendix C of this part. Methods 608.3 and 625.1 are available at https://www.epa.gov/cwa-methods/approved-cwa-test-methods-organic-compounds.

4Permethrin is not listed within methods 608.3 and 625.1; however, cis-permethrin and trans-permethrin are listed. Permethrin can be calculated by adding the results of cis- and trans-permethrin.

Table IH—List of Approved Microbiological Methods for Ambient Water

Open Table
Parameter and units Method1 EPA Standard methods AOAC, ASTM, USGS Other
Bacteria
1. Coliform (fecal), number per 100 mL or number per gram dry weight Most Probable Number (MPN), 5 tube, 3 dilution, or p. 1323 9221 C E-2006.
    Membrane filter (MF),2 single step p. 1243 9222 D-200627 B-0050-85.4
2. Coliform (fecal) in presence of chlorine, number per 100 mL MPN, 5 tube, 3 dilution, or p. 1323 9221 C E-2006.
    MF,2 single step5 p. 1243 9222 D-2006.27
3. Coliform (total), number per 100 mL MPN, 5 tube, 3 dilution, or p. 1143 9221 B-2006.
    MF,2 single step or two step p. 1083 9222 B-2006 B-0025-85.4
4. Coliform (total), in presence of chlorine, number per 100 mL MPN, 5 tube, 3 dilution, or p. 1143 9221 B-2006.
    MF2 with enrichment p. 1113 9222 B-2006.
5. E. coli, number per 100 mL MPN,6 8 14 multiple tube, or 9221 B.2-2006/9221 F-200611 13
    Multiple tube/multiple well, or 9223 B-200412 991.1510 Colilert®,12 16 Colilert-18®.12 15 16
    MF,2 5 6 7 8 two step, or 1103.119 9222 B-2006/9222 G-2006,18 9213 D-2007 D-5392-93.9
    Single step 1603,20 160421 mColiBlue-24®.17
6. Fecal streptococci, number per 100 mL MPN, 5 tube, 3 dilution, or p. 1393 9230 B-2007.
    MF2, or p. 1363 9230 C-2007 B-0055-854
    Plate count p. 143.3
7. Enterococci, number per 100 mL MPN,6 8 multiple tube/multiple well, or 9230 D-2007 D6503-999 Enterolert®.12 22
    MF2 5 6 7 8 two step, or 1106.123 9230 C-2007 D5259-92.9
    Single step, or 160024 9230 C-2007.
    Plate count p. 143.3
Protozoa
8. Cryptosporidium Filtration/IMS/FA 1622,25 1623.26
9. Giardia Filtration/IMS/FA 1623.26

Table IH notes:

1The method must be specified when results are reported.

2A 0.45-µm membrane filter (MF) or other pore size certified by the manufacturer to fully retain organisms to be cultivated and to be free of extractables which could interfere with their growth.

3Microbiological Methods for Monitoring the Environment, Water, and Wastes. EPA/600/8-78/017. 1978. U.S. EPA.

4U.S. Geological Survey Techniques of Water-Resource Investigations, Book 5, Laboratory Analysis, Chapter A4, Methods for Collection and Analysis of Aquatic Biological and Microbiological Samples. 1989. USGS.

5Because the MF technique usually yields low and variable recovery from chlorinated wastewaters, the Most Probable Number method will be required to resolve any controversies.

6Tests must be conducted to provide organism enumeration (density). Select the appropriate configuration of tubes/filtrations and dilutions/volumes to account for the quality, character, consistency, and anticipated organism density of the water sample.

7When the MF method has not been used previously to test waters with high turbidity, large numbers of noncoliform bacteria, or samples that may contain organisms stressed by chlorine, a parallel test should be conducted with a multiple-tube technique to demonstrate applicability and comparability of results.

8To assess the comparability of results obtained with individual methods, it is suggested that side-by-side tests be conducted across seasons of the year with the water samples routinely tested in accordance with the most current Standard Methods for the Examination of Water and Wastewater or EPA alternate test procedure (ATP) guidelines.

9Annual Book of ASTM Standards—Water and Environmental Technology. Section 11.02. 2000, 1999, 1996. ASTM International.

10Official Methods of Analysis of AOAC International, 16th Edition, Volume I, Chapter 17. 1995. AOAC International.

11The multiple-tube fermentation test is used in 9221B.2-2006. Lactose broth may be used in lieu of lauryl tryptose broth (LTB), if at least 25 parallel tests are conducted between this broth and LTB using the water samples normally tested, and this comparison demonstrates that the false-positive rate and false-negative rate for total coliform using lactose broth is less than 10 percent. No requirement exists to run the completed phase on 10 percent of all total coliform-positive tubes on a seasonal basis.

12These tests are collectively known as defined enzyme substrate tests, where, for example, a substrate is used to detect the enzyme β-glucuronidase produced byE. coli.

13After prior enrichment in a presumptive medium for total coliform using 9221B.2-2006, all presumptive tubes or bottles showing any amount of gas, growth or acidity within 48 h ± 3 h of incubation shall be submitted to 9221F-2006. Commercially available EC-MUG media or EC media supplemented in the laboratory with 50 µg/mL of MUG may be used.

14Samples shall be enumerated by the multiple-tube or multiple-well procedure. Using multiple-tube procedures, employ an appropriate tube and dilution configuration of the sample as needed and report the Most Probable Number (MPN). Samples tested with Colilert® may be enumerated with the multiple-well procedures, Quanti-Tray® or Quanti-Tray®/2000, and the MPN calculated from the table provided by the manufacturer.

15Colilert-18® is an optimized formulation of the Colilert® for the determination of total coliforms andE. coli that provides results within 18 h of incubation at 35 °C, rather than the 24 h required for the Colilert® test, and is recommended for marine water samples.

16Descriptions of the Colilert®, Colilert-18®, and Quanti-Tray® may be obtained from IDEXX Laboratories Inc.

17A description of the mColiBlue24® test may be obtained from Hach Company.

18Subject total coliform positive samples determined by 9222B-2006 or other membrane filter procedure to 9222G-2006 using NA-MUG media.

19Method 1103.1:Escherichia coli (E. coli) in Water by Membrane Filtration Using membrane-ThermotolerantEscherichia coli Agar (mTEC), EPA-821-R-10-002. March 2010. U.S. EPA.

20Method 1603:Escherichia coli (E. coli) in Water by Membrane Filtration Using Modified membrane-ThermotolerantEscherichia coli Agar (Modified mTEC), EPA-821-R-14-010. September 2014. U.S. EPA.

21Preparation and use of MI agar with a standard membrane filter procedure is set forth in the article, Brenner et al. 1993. New Medium for the Simultaneous Detection of Total Coliform andEscherichia coli in Water. Appl. Environ. Microbiol. 59:3534-3544 and in Method 1604: Total Coliforms andEscherichia coli (E. coli) in Water by Membrane Filtration by Using a Simultaneous Detection Technique (MI Medium), EPA 821-R-02-024, September 2002, U.S. EPA.

22A description of the Enterolert® test may be obtained from IDEXX Laboratories Inc.

23Method 1106.1: Enterococci in Water by Membrane Filtration Using membrane-Enterococcus-Esculin Iron Agar (mE-EIA), EPA-821-R-09-015. December 2009. U.S. EPA.

24Method 1600: Enterococci in Water by Membrane Filtration Using membrane-Enterococcus Indoxyl-β-D-Glucoside Agar (mEI), EPA-821-R-14-011. September 2014. U.S. EPA.

25Method 1622 uses a filtration, concentration, immunomagnetic separation of oocysts from captured material, immunofluorescence assay to determine concentrations, and confirmation through vital dye staining and differential interference contrast microscopy for the detection ofCryptosporidium. Method 1622:Cryptosporidium in Water by Filtration/IMS/FA, EPA-821-R-05-001. December 2005. U.S. EPA.

26Method 1623 uses a filtration, concentration, immunomagnetic separation of oocysts and cysts from captured material, immunofluorescence assay to determine concentrations, and confirmation through vital dye staining and differential interference contrast microscopy for the simultaneous detection ofCryptosporidium andGiardia oocysts and cysts. Method 1623:Cryptosporidium andGiardia in Water by Filtration/IMS/FA. EPA-821-R-05-002. December 2005. U.S. EPA.

27On a monthly basis, at least ten blue colonies from the medium must be verified using Lauryl Tryptose Broth and EC broth, followed by count adjustment based on these results; and representative non-blue colonies should be verified using Lauryl Tryptose Broth. Where possible, verifications should be done from randomized sample sources.

(b) Certain material is incorporated by reference into this part with the approval of the Director of the Federal Register under 5 U.S.C. 552(a) and 1 CFR part 51. All approved material is available for inspection at EPA's Water Docket, EPA West, 1301 Constitution Avenue NW., Room 3334, Washington, DC 20004, Telephone: 202-566-2426, and is available from the sources listed below. It is also available for inspection at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, call 202-741-6030, or go to: https://www.archives.gov/federal-register/cfr/ibr-locations.html.

(1) Environmental Monitoring and Support Laboratory, U.S. Environmental Protection Agency, Cincinnati OH (US EPA). Available at http://water.epa.gov/scitech/methods/cwa/index.cfm or from: National Technical Information Service, 5285 Port Royal Road, Springfield, Virginia 22161

(i) Microbiological Methods for Monitoring the Environment, Water, and Wastes. 1978. EPA/600/8-78/017, Pub. No. PB-290329/A.S.

(A) Part III Analytical Methodology, Section B Total Coliform Methods, page 108. Table IA, Note 3; Table IH, Note 3.

(B) Part III Analytical Methodology, Section B Total Coliform Methods, 2.6.2 Two-Step Enrichment Procedure, page 111. Table IA, Note 3; Table IH, Note 3.

(C) Part III Analytical Methodology, Section B Total Coliform Methods, 4 Most Probable Number (MPN) Method, page 114. Table IA, Note 3; Table IH, Note 3.

(D) Part III Analytical Methodology, Section C Fecal Coliform Methods, 2 Direct Membrane Filter (MF) Method, page 124. Table IA, Note 3; Table IH, Note 3.

(E) Part III, Analytical Methodology, Section C Fecal Coliform Methods, 5 Most Probable Number (MPN) Method, page 132. Table IA, Note 3; Table IH, Note 3.

(F) Part III Analytical Methodology, Section D Fecal Streptococci, 2 Membrane Filter (MF) Method, page 136. Table IA, Note 3; Table IH, Note 3.

(G) Part III Analytical Methodology, Section D Fecal Streptococci, 4 Most Probable Number Method, page 139. Table IA, Note 3; Table IH, Note 3.

(H) Part III Analytical Methodology, Section D Fecal Streptococci, 5 Pour Plate Method, page 143. Table IA, Note 3; Table IH, Note 3.

(ii) [Reserved]

(2) Environmental Monitoring and Support Laboratory, U.S. Environmental Protection Agency, Cincinnati OH (US EPA). Available at http://water.epa.gov/scitech/methods/cwa/index.cfm.

(i) Method 300.1 (including Errata Cover Sheet, April 27, 1999), Determination of Inorganic Ions in Drinking Water by Ion Chromatography, Revision 1.0, 1997. Table IB, Note 52.

(ii) Method 551, Determination of Chlorination Disinfection Byproducts and Chlorinated Solvents in Drinking Water by Liquid-Liquid Extraction and Gas Chromatography With Electron-Capture Detection. 1990. Table IF.

(3) National Exposure Risk Laboratory-Cincinnati, U.S. Environmental Protection Agency, Cincinnati OH (US EPA). Available from http://water.epa.gov/scitech/methods/cwa/index.cfm or from the National Technical Information Service (NTIS), 5285 Port Royal Road, Springfield, VA 22161. Telephone: 800-553-6847.

(i) Methods for the Determination of Inorganic Substances in Environmental Samples. August 1993. EPA/600/R-93/100, Pub. No. PB 94120821. Table IB, Note 52.

(A) Method 180.1, Determination of Turbidity by Nephelometry. Revision 2.0. Table IB, Note 52.

(B) Method 300.0, Determination of Inorganic Anions by Ion Chromatography. Revision 2.1. Table IB, Note 52.

(C) Method 335.4, Determination of Total Cyanide by Semi-Automated Colorimetry. Revision 1.0. Table IB, Notes 52 and 57.

(D) Method 350.1, Determination of Ammonium Nitrogen by Semi-Automated Colorimetry. Revision 2.0. Table IB, Notes 30 and 52.

(E) Method 351.2, Determination of Total Kjeldahl Nitrogen by Semi-Automated Colorimetry. Revision 2.0. Table IB, Note 52.

(F) Method 353.2, Determination of Nitrate-Nitrite Automated Colorimetry. Revision 2.0. Table IB, Note 52.

(G) Method 365.1, Determination of Phosphorus by Automated Colorimetry. Revision 2.0. Table IB, Note 52.

(H) Method 375.2, Determination of Sulfate by Automated Colorimetry. Revision 2.0. Table IB, Note 52.

(I) Method 410.4, Determination of Chemical Oxygen Demand by Semi-Automated Colorimetry. Revision 2.0. Table IB, Note 52.

(ii) Methods for the Determination of Metals in Environmental Samples, Supplement I. May 1994. EPA/600/R-94/111, Pub. No. PB 95125472. Table IB, Note 52.

(A) Method 200.7, Determination of Metals and Trace Elements in Water and Wastes by Inductively Coupled Plasma-Atomic Emission Spectrometry. Revision 4.4. Table IB, Note 52.

(B) Method 200.8, Determination of Trace Elements in Water and Wastes by Inductively Coupled Plasma Mass Spectrometry. Revision 5.3. Table IB, Note 52.

(C) Method 200.9, Determination of Trace Elements by Stabilized Temperature Graphite Furnace Atomic Absorption Spectrometry. Revision 2.2. Table IB, Note 52.

(D) Method 218.6, Determination of Dissolved Hexavalent Chromium in Drinking Water, Groundwater, and Industrial Wastewater Effluents by Ion Chromatography. Revision 3.3. Table IB, Note 52.

(E) Method 245.1, Determination of Mercury in Water by Cold Vapor Atomic Absorption Spectrometry. Revision 3.0. Table IB, Note 52.

(4) National Exposure Risk Laboratory-Cincinnati, U.S. Environmental Protection Agency, Cincinnati OH (US EPA). Available at http://water.epa.gov/scitech/methods/cwa/index.cfm.

(i) EPA Method 200.5, Determination of Trace Elements in Drinking Water by Axially Viewed Inductively Coupled Plasma-Atomic Emission Spectrometry. Revision 4.2, October 2003. EPA/600/R-06/115. Table IB, Note 68.

(ii) EPA Method 525.2, Determination of Organic Compounds in Drinking Water by Liquid-Solid Extraction and Capillary Column Gas Chromatography/Mass Spectrometry. Revision 2.0, 1995. Table ID, Note 10.

(5) Office of Research and Development, Cincinnati OH. U.S. Environmental Protection Agency, Cincinnati OH (US EPA). Available at http://water.epa.gov/scitech/methods/cwa/index.cfm or from ORD Publications, CERI, U.S. Environmental Protection Agency, Cincinnati OH 45268.

(i) Methods for Benzidine, Chlorinated Organic Compounds, Pentachlorophenol, and Pesticides in Water and Wastewater. 1978. Table IC, Note 3; Table ID, Note 3.

(ii) Methods for Chemical Analysis of Water and Wastes. March 1979. EPA-600/4-79-020. Table IB, Note 1.

(iii) Methods for Chemical Analysis of Water and Wastes. Revised March 1983. EPA-600/4-79-020. Table IB, Note 1.

(A) Method 120.1, Conductance, Specific Conductance, µmhos at 25 °C. Revision 1982. Table IB, Note 1.

(B) Method 130.1, Hardness, Total (mg/L as CaCO3), Colorimetric, Automated EDTA. Issued 1971. Table IB, Note 1.

(C) Method 150.2, pH, Continuous Monitoring (Electrometric). December 1982. Table IB, Note 1.

(D) Method 160.4, Residue, Volatile, Gravimetric, Ignition at 550 °C. Issued 1971. Table IB, Note 1.

(E) Method 206.5, Arsenic, Sample Digestion Prior to Total Arsenic Analysis by Silver Diethyldithiocarbamate or Hydride Procedures. Issued 1978. Table IB, Note 1.

(F) Method 231.2, Gold, Atomic Absorption, Furnace Technique. Issued 1978. Table IB, Note 1.

(G) Method 245.2, Mercury, Automated Cold Vapor Technique. Issued 1974. Table IB, Note 1.

(H) Method 252.2, Osmium, Atomic Absorption, Furnace Technique. Issued 1978. Table IB, Note 1.

(I) Method 253.2, Palladium, Atomic Absorption, Furnace Technique. Issued 1978. Table IB, Note 1.

(J) Method 255.2, Platinum, Atomic Absorption, Furnace Technique. Issued 1978. Table IB, Note 1.

(K) Method 265.2, Rhodium, Atomic Absorption, Furnace Technique. Issued 1978. Table IB, Note 1.

(L) Method 279.2, Thallium, Atomic Absorption, Furnace Technique. Issued 1978. Table IB, Note 1.

(M) Method 283.2, Titanium, Atomic Absorption, Furnace Technique. Issued 1978. Table IB, Note 1.

(N) Method 289.2, Zinc, Atomic Absorption, Furnace Technique. Issued 1978. Table IB, Note 1.

(O) Method 310.2, Alkalinity, Colorimetric, Automated, Methyl Orange. Revision 1974. Table IB, Note 1.

(P) Method 351.1, Nitrogen, Kjeldahl, Total, Colorimetric, Automated Phenate. Revision 1978. Table IB, Note 1.

(Q) Method 352.1, Nitrogen, Nitrate, Colorimetric, Brucine. Issued 1971. Table IB, Note 1.

(R) Method 365.3, Phosphorus, All Forms, Colorimetric, Ascorbic Acid, Two Reagent. Issued 1978. Table IB, Note 1.

(S) Method 365.4, Phosphorus, Total, Colorimetric, Automated, Block Digestor AA II. Issued 1974. Table IB, Note 1.

(T) Method 410.3, Chemical Oxygen Demand, Titrimetric, High Level for Saline Waters. Revision 1978. Table IB, Note 1.

(U) Method 420.1, Phenolics, Total Recoverable, Spectrophotometric, Manual 4-AAP With Distillation. Revision 1978. Table IB, Note 1.

(iv) Prescribed Procedures for Measurement of Radioactivity in Drinking Water. 1980. EPA-600/4-80-032. Table IE.

(A) Method 900.0, Gross Alpha and Gross Beta Radioactivity. Table IE.

(B) Method 903.0, Alpha-Emitting iRadio Isotopes. Table IE.

(C) Method 903.1, Radium-226, Radon Emanation Technique. Table IE.

(D) Appendix B, Error and Statistical Calculations. Table IE.

(6) Office of Science and Technology, U.S. Environmental Protection Agency, Washington DC (US EPA). Available at http://water.epa.gov/scitech/methods/cwa/index.cfm.

(i) Method 1625C, Semivolatile Organic Compounds by Isotope Dilution GCMS. 1989. Table IF.

(ii) [Reserved]

(7) Office of Water, U.S. Environmental Protection Agency, Washington DC (US EPA). Available at http://water.epa.gov/scitech/methods/cwa/index.cfm or from National Technical Information Service, 5285 Port Royal Road, Springfield, Virginia 22161.

(i) Method 1631, Mercury in Water by Oxidation, Purge and Trap, and Cold Vapor Atomic Fluorescence Spectrometry. Revision E, August 2002. EPA-821-R-02-019, Pub. No. PB2002-108220. Table IB, Note 43.

(ii) Kelada-01, Kelada Automated Test Methods for Total Cyanide, Acid Dissociable Cyanide, and Thiocyanate. Revision 1.2, August 2001. EPA 821-B-01-009, Pub. No. PB 2001-108275. Table IB, Note 55.

(iii) In the compendium Analytical Methods for the Determination of Pollutants in Pharmaceutical Manufacturing Industry Wastewaters. July 1998. EPA 821-B-98-016, Pub. No. PB95201679. Table IF, Note 1.

(A) EPA Method 1666, Volatile Organic Compounds Specific to the Pharmaceutical Industry by Isotope Dilution GC/MS. Table IF, Note 1.

(B) EPA Method 1667, Formaldehyde, Isobutyraldehyde, and Furfural by Derivatization Followed by High Performance Liquid Chromatography. Table IF.

(C) Method 1671, Volatile Organic Compounds Specific to the Pharmaceutical Manufacturing Industry by GC/FID. Table IF.

(iv) Methods For The Determination of Nonconventional Pesticides In Municipal and Industrial Wastewater, Volume I. Revision I, August 1993. EPA 821-R-93-010A, Pub. No. PB 94121654. Tables ID, IG.

(A) Method 608.1, Organochlorine Pesticides. Table ID, Note 10; Table IG, Note 3.

(B) Method 608.2, Certain Organochlorine Pesticides. Table ID, Note 10; Table IG, Note 3.

(C) Method 614, Organophosphorus Pesticides. Table ID, Note 10; Table IG, Note 3.

(D) Method 614.1, Organophosphorus Pesticides. Table ID, Note 10; Table IG, Note 3.

(E) Method 615, Chlorinated Herbicides. Table ID, Note 10; Table IG, Note 3.

(F) Method 617, Organohalide Pesticides and PCBs. Table ID, Note 10; Table IG, Note 3.

(G) Method 619, Triazine Pesticides. Table ID, Note 10; Table IG, Note 3.

(H) Method 622, Organophosphorus Pesticides. Table ID, Note 10; Table IG, Note 3.

(I) Method 622.1, Thiophosphate Pesticides. Table ID, Note 10; Table IG, Note 3.

(J) Method 627, Dinitroaniline Pesticides. Table ID, Note 10; Table IG, Notes 1 and 3.

(K) Method 629, Cyanazine. Table IG, Note 3.

(L) Method 630, Dithiocarbamate Pesticides. Table IG, Note 3.

(M) Method 630.1, Dithiocarbamate Pesticides. Table IG, Note 3.

(N) Method 631, Benomyl and Carbendazim. Table IG, Note 3.

(O) Method 632, Carbamate and Urea Pesticides. Table ID, Note 10; Table IG, Note 3.

(P) Method 632.1, Carbamate and Amide Pesticides. Table IG, Note 3.

(Q) Method 633, Organonitrogen Pesticides. Table IG, Note 3.

(R) Method 633.1, Neutral Nitrogen-Containing Pesticides. Table IG, Note 3.

(S) Method 637, MBTS and TCMTB. Table IG, Note 3.

(T) Method 644, Picloram. Table IG, Note 3.

(U) Method 645, Certain Amine Pesticides and Lethane. Table IG, Note 3.

(V) Method 1656, Organohalide Pesticides. Table ID, Note 10; Table IG, Notes 1 and 3.

(W) Method 1657, Organophosphorus Pesticides. Table ID, Note 10; Table IG, Note 3.

(X) Method 1658, Phenoxy-Acid Herbicides. Table IG, Note 3.

(Y) Method 1659, Dazomet. Table IG, Note 3.

(Z) Method 1660, Pyrethrins and Pyrethroids. Table IG, Note 3.

(AA) Method 1661, Bromoxynil. Table IG, Note 3.

(BB) Ind-01. Methods EV-024 and EV-025, Analytical Procedures for Determining Total Tin and Triorganotin in Wastewater. Table IG, Note 3.

(v) Methods For The Determination of Nonconventional Pesticides In Municipal and Industrial Wastewater, Volume II. August 1993. EPA 821-R-93-010B, Pub. No. PB 94166311. Table IG.

(A) Method 200.9, Determination of Trace Elements by Stabilized Temperature Graphite Furnace Atomic Absorption Spectrometry. Table IG, Note 3.

(B) Method 505, Analysis of Organohalide Pesticides and Commercial Polychlorinated Biphenyl (PCB) Products in Water by Microextraction and Gas Chromatography. Table ID, Note 10; Table IG, Note 3.

(C) Method 507, The Determination of Nitrogen- and Phosphorus-Containing Pesticides in Water by Gas Chromatography with a Nitrogen-Phosphorus Detector. Table ID, Note 10; Table IG, Note 3.

(D) Method 508, Determination of Chlorinated Pesticides in Water by Gas Chromatography with an Electron Capture Detector. Table ID, Note 10; Table IG, Note 3.

(E) Method 515.1, Determination of Chlorinated Acids in Water by Gas Chromatography with an Electron Capture Detector. Table IG, Notes 2 and 3.

(F) Method 515.2, Determination of Chlorinated Acids in Water Using Liquid-Solid Extraction and Gas Chromatography with an Electron Capture Detector. Table IG, Notes 2 and 3.

(G) Method 525.1, Determination of Organic Compounds in Drinking Water by Liquids-Solid Extraction and Capillary Column Gas Chromatography/Mass Spectrometry. Table ID, Note 10; Table IG, Note 3.

(H) Method 531.1, Measurement of N-Methylcarbamoyloximes and N-Methylcarbamates in Water by Direct Aqueous Injection HPLC with Post-Column Derivatization. Table ID, Note 10; Table IG, Note 3.

(I) Method 547, Determination of Glyphosate in Drinking Water by Direct-Aqueous-Injection HPLC, Post-Column Derivatization, and Fluorescence Detection. Table IG, Note 3.

(J) Method 548, Determination of Endothall in Drinking Water by Aqueous Derivatization, Liquid-Solid Extraction, and Gas Chromatography with Electron-Capture Detector. Table IG, Note 3.

(K) Method 548.1, Determination of Endothall in Drinking Water by Ion-Exchange Extraction, Acidic Methanol Methylation and Gas Chromatography/Mass Spectrometry. Table IG, Note 3.

(L) Method 553, Determination of Benzidines and Nitrogen-Containing Pesticides in Water by Liquid-Liquid Extraction or Liquid-Solid Extraction and Reverse Phase High Performance Liquid Chromatography/Particle Beam/Mass Spectrometry Table ID, Note 10; Table IG, Note 3.

(M) Method 555, Determination of Chlorinated Acids in Water by High Performance Liquid Chromatography With a Photodiode Array Ultraviolet Detector. Table IG, Note 3.

(vi) In the compendium Methods for the Determination of Organic Compounds in Drinking Water. Revised July 1991, December 1998. EPA-600/4-88-039, Pub. No. PB92-207703. Table IF.

(A) EPA Method 502.2, Volatile Organic Compounds in Water by Purge and Trap Capillary Column Gas Chromatography with Photoionization and Electrolytic Conductivity Detectors in Series. Table IF.

(B) [Reserved]

(vii) In the compendium Methods for the Determination of Organic Compounds in Drinking Water-Supplement II. August 1992. EPA-600/R-92-129, Pub. No. PB92-207703. Table IF.

(A) EPA Method 524.2, Measurement of Purgeable Organic Compounds in Water by Capillary Column Gas Chromatography/Mass Spectrometry. Table IF.

(B) [Reserved]

(viii) Methods for Measuring the Acute Toxicity of Effluents and Receiving Waters to Freshwater and Marine Organisms, Fifth Edition. October 2002. EPA 821-R-02-012, Pub. No. PB2002-108488. Table IA, Note 26.

(ix) Short-Term Methods for Measuring the Chronic Toxicity of Effluents and Receiving Waters to Freshwater Organisms, Fourth Edition. October 2002. EPA 821-R-02-013, Pub. No. PB2002-108489. Table IA, Note 27.

(x) Short-Term Methods for Measuring the Chronic Toxicity of Effluents and Receiving Waters to Marine and Estuarine Organisms, Third Edition. October 2002. EPA 821-R-02-014, Pub. No. PB2002-108490. Table IA, Note 28.

(8) Office of Water, U.S. Environmental Protection Agency, Washington DC (US EPA). Available at http://water.epa.gov/scitech/methods/cwa/index.cfm.

(i) Method 245.7, Mercury in Water by Cold Vapor Atomic Fluorescence Spectrometry. Revision 2.0, February 2005. EPA-821-R-05-001. Table IB, Note 17.

(ii) Method 1103.1: Escherichia coli (E. coli) in Water by Membrane Filtration Using membrane-Thermotolerant Escherichia coli Agar (mTEC). March 2010. EPA-621-R-10-002. Table IH, Note 19.

(iii) Method 1106.1: Enterococci in Water by Membrane Filtration Using membrane-Enterococcus-Esculin Iron Agar (mE-EIA). December 2009. EPA-621-R-09-015. Table IH, Note 23.

(iv) Method 1600: Enterococci in Water by Membrane Filtration Using membrane-Enterococcus Indoxyl-β-D-Glucoside Agar (mEI). September 2014. EPA-821-R-14-011. Table IA, Note 25; Table IH, Note 24.

(v) Method 1603: Escherichia coli (E. coli) in Water by Membrane Filtration Using Modified membrane-Thermotolerant Escherichia coli Agar (Modified mTEC). September 2014. EPA-821-R-14-010. Table IA, Note 22; Table IH, Note 20.

(vi) Method 1604: Total Coliforms and Escherichia coli (E. coli) in Water by Membrane Filtration Using a Simultaneous Detection Technique (MI Medium). September 2002. EPA-821-R-02-024. Table IH, Note 21.

(vii) Method 1622: Cryptosporidium in Water by Filtration/IMS/FA. December 2005. EPA-821-R-05-001. Table IH, Note 25.

(viii) Method 1623: Cryptosporidium and Giardia in Water by Filtration/IMS/FA. December 2005. EPA-821-R-05-002. Table IH, Note 26.

(ix) Method 1627, Kinetic Test Method for the Prediction of Mine Drainage Quality. December 2011. EPA-821-R-09-002. Table IB, Note 69.

(x) Method 1664, n-Hexane Extractable Material (HEM; Oil and Grease) and Silica Gel Treated n-Hexane Extractable Material (SGT-HEM; Non-polar Material) by Extraction and Gravimetry. Revision A, February 1999. EPA-821-R-98-002. Table IB, Notes 38 and 42.

(xi) Method 1664, n-Hexane Extractable Material (HEM; Oil and Grease) and Silica Gel Treated n-Hexane Extractable Material (SGT-HEM; Non-polar Material) by Extraction and Gravimetry. Revision B, February 2010. EPA-821-R-10-001. Table IB, Notes 38 and 42.

(xii) Method 1669, Sampling Ambient Water for Trace Metals at EPA Water Quality Criteria Levels. July 1996. Table IB, Note 43.

(xiii) Method 1680: Fecal Coliforms in Sewage Sludge (Biosolids) by Multiple-Tube Fermentation using Lauryl Tryptose Broth (LTB) and EC Medium. September 2014. EPA-821-R-14-009. Table IA, Note 15.

(xiv) Method 1681: Fecal Coliforms in Sewage Sludge (Biosolids) by Multiple-Tube Fermentation using A-1 Medium. July 2006. EPA 821-R-06-013. Table IA, Note 20.

(xv) Method 1682: Salmonella in Sewage Sludge (Biosolids) by Modified Semisolid Rappaport-Vassiliadis (MSRV) Medium. September 2014. EPA 821-R-14-012. Table IA, Note 23.

(9) American National Standards Institute, 1430 Broadway, New York NY 10018.

(i) ANSI. American National Standard on Photographic Processing Effluents. April 2, 1975. Table IB, Note 9.

(ii) [Reserved]

(10) American Public Health Association, 1015 15th Street NW., Washington, DC 20005. Standard Methods Online is available through the Standard Methods Web site (http://www.standardmethods.org).

(i) Standard Methods for the Examination of Water and Wastewater. 14th Edition, 1975. Table IB, Notes 17 and 27.

(ii) Standard Methods for the Examination of Water and Wastewater. 15th Edition, 1980, Table IB, Note 30; Table ID.

(iii) Selected Analytical Methods Approved and Cited by the United States Environmental Protection Agency, Supplement to the 15th Edition of Standard Methods for the Examination of Water and Wastewater. 1981. Table IC, Note 6; Table ID, Note 6.

(iv) Standard Methods for the Examination of Water and Wastewater. 18th Edition, 1992. Tables IA, IB, IC, ID, IE, and IH.

(v) Standard Methods for the Examination of Water and Wastewater. 19th Edition, 1995. Tables IA, IB, IC, ID, IE, and IH.

(vi) Standard Methods for the Examination of Water and Wastewater. 20th Edition, 1998. Tables IA, IB, IC, ID, IE, and IH.

(vii) Standard Methods for the Examination of Water and Wastewater. 21st Edition, 2005. Table IB, Notes 17 and 27.

(viii) 2120, Color. 2011. Table IB.

(ix) 2130, Turbidity. 2011. Table IB.

(x) 2310, Acidity. 2011. Table IB.

(xi) 2320, Alkalinity. 2011. Table IB.

(xii) 2340, Hardness. 2011. Table IB.

(xiii) 2510, Conductivity. 2011. Table IB.

(xiv) 2540, Solids. 2011. Table IB.

(xv) 2550, Temperature. 2010. Table IB.

(xvi) 3111, Metals by Flame Atomic Absorption Spectrometry. 2011. Table IB.

(xvii) 3112, Metals by Cold-Vapor Atomic Absorption Spectrometry. 2011. Table IB.

(xviii) 3113, Metals by Electrothermal Atomic Absorption Spectrometry. 2010. Table IB.

(xix) 3114, Arsenic and Selenium by Hydride Generation/Atomic Absorption Spectrometry. 2011. Table IB.

(xx) 3120, Metals by Plasma Emission Spectroscopy. 2011. Table IB.

(xxi) 3125, Metals by Inductively Coupled Plasma-Mass Spectrometry. 2011. Table IB.

(xxii) 3500-Al, Aluminum. 2011. Table IB.

(xxiii) 3500-As, Arsenic. 2011. Table IB.

(xxiv) 3500-Ca, Calcium. 2011. Table IB.

(xxv) 3500-Cr, Chromium. 2011. Table IB.

(xxvi) 3500-Cu, Copper. 2011. Table IB.

(xxvii) 3500-Fe, Iron. 2011. Table IB.

(xxviii) 3500-Pb, Lead. 2011. Table IB.

(xxix) 3500-Mn, Manganese. 2011. Table IB.

(xxx) 3500-K, Potassium. 2011. Table IB.

(xxxi) 3500-Na, Sodium. 2011. Table IB.

(xxxii) 3500-V, Vanadium. 2011. Table IB.

(xxxiii) 3500-Zn, Zinc. 2011. Table IB.

(xxxiv) 4110, Determination of Anions by Ion Chromatography. 2011. Table IB.

(xxxv) 4140, Inorganic Anions by Capillary Ion Electrophoresis. 2011. Table IB.

(xxxvi) 4500-B, Boron. 2011. Table IB.

(xxxvii) 4500-Cl, Chloride. 2011. Table IB.

(xxxviii) 4500-Cl, Chlorine (Residual). 2011. Table IB.

(xxxix) 4500-CN, Cyanide. 2011. Table IB.

(xl) 4500-F, Fluoride. 2011. Table IB.

(xli) 4500-H+, pH Value. 2011. Table IB.

(xlii) 4500-NH3, Nitrogen (Ammonia). 2011. Table IB.

(xliii) 4500-NO2, Nitrogen (Nitrite). 2011. Table IB.

(xliv) 4500-NO3, Nitrogen (Nitrate). 2011. Table IB.

(xlv) 4500-Norg, Nitrogen (Organic). 2011. Table IB.

(xlvi) 4500-O, Oxygen (Dissolved). 2011. Table IB.

(xlvii) 4500-P, Phosphorus. 2011. Table IB.

(xlviii) 4500-SiO2, Silica. 2011. Table IB.

(xlix) 4500-S2−, Sulfide. 2011. Table IB.

(l) 4500-SO32−, Sulfite. 2011. Table IB.

(li) 4500-SO42−, Sulfate. 2011. Table IB.

(lii) 5210, Biochemical Oxygen Demand (BOD). 2011. Table IB.

(liii) 5220, Chemical Oxygen Demand (COD). 2011. Table IB.

(liv) 5310, Total Organic Carbon (TOC). 2011. Table IB.

(lv) 5520, Oil and Grease. 2011. Table IB.

(lvi) 5530, Phenols. 2010. Table IB.

(lvii) 5540, Surfactants. 2011. Table IB.

(lviii) 6200, Volatile Organic Compounds. 2011. Table IC.

(lix) 6410, Extractable Base/Neutrals and Acids. 2000. Tables IC, ID.

(lx) 6420, Phenols. 2000. Table IC.

(lxi) 6440, Polynuclear Aromatic Hydrocarbons. 2005. Table IC.

(lxii) 6630, Organochlorine Pesticides. 2007. Table ID.

(lxiii) 6640, Acidic Herbicide Compounds. 2006. Table ID.

(lxiv) 7110, Gross Alpha and Gross Beta Radioactivity (Total, Suspended, and Dissolved). 2000. Table IE.

(lxv) 7500, Radium. 2001. Table IE.

(lxvi) 9213, Recreational Waters. 2007. Table IH.

(lxvii) 9221, Multiple-Tube Fermentation Technique for Members of the Coliform Group. 2006. Table IA, Notes 12 and 14; Table IH, Notes 11 and 13.

(lxviii) 9222, Membrane Filter Technique for Members of the Coliform Group. 2006. Table IA; Table IH, Note 18.

(lxix) 9223, Enzyme Substrate Coliform Test. 2004. Table IA; Table IH.

(lxx) 9230, Fecal Enterococcus/Streptococcus Groups. 2007. Table IA; Table IH.

(11) The Analyst, The Royal Society of Chemistry, RSC Publishing, Royal Society of Chemistry, Thomas Graham House, Science Park, Milton Road, Cambridge CB4 0WF, United Kingdom. (Also available from most public libraries.)

(i) Spectrophotometric Determination of Ammonia: A Study of a Modified Berthelot Reaction Using Salicylate and Dichloroisocyanurate. Krom, M.D. 105:305-316, April 1980. Table IB, Note 60.

(ii) [Reserved]

(12) Analytical Chemistry, ACS Publications, 1155 Sixteenth St. NW., Washington DC 20036. (Also available from most public libraries.)

(i) Spectrophotometric and Kinetics Investigation of the Berthelot Reaction for the Determination of Ammonia. Patton, C.J. and S.R. Crouch. 49(3):464-469, March 1977. Table IB, Note 60.

(ii) [Reserved]

(13) AOAC International, 481 North Frederick Avenue, Suite 500, Gaithersburg, MD 20877-2417.

(i) Official Methods of Analysis of AOAC International. 16th Edition, 4th Revision, 1998.

(A) 920.203, Manganese in Water, Persulfate Method. Table IB, Note 3.

(B) 925.54, Sulfate in Water, Gravimetric Method. Table IB, Note 3.

(C) 973.40, Specific Conductance of Water. Table IB, Note 3.

(D) 973.41, pH of Water. Table IB, Note 3.

(E) 973.43, Alkalinity of Water, Titrimetric Method. Table IB, Note 3.

(F) 973.44, Biochemical Oxygen Demand (BOD) of Water, Incubation Method. Table IB, Note 3.

(G) 973.45, Oxygen (Dissolved) in Water, Titrimetric Methods. Table IB, Note 3.

(H) 973.46, Chemical Oxygen Demand (COD) of Water, Titrimetric Methods. Table IB, Note 3.

(I) 973.47, Organic Carbon in Water, Infrared Analyzer Method. Table IB, Note 3.

(J) 973.48, Nitrogen (Total) in Water, Kjeldahl Method. Table IB, Note 3.

(K) 973.49, Nitrogen (Ammonia) in Water, Colorimetric Method. Table IB, Note 3.

(L) 973.50, Nitrogen (Nitrate) in Water, Brucine Colorimetric Method. Table IB, Note 3.

(M) 973.51, Chloride in Water, Mercuric Nitrate Method. Table IB, Note 3.

(N) 973.52, Hardness of Water. Table IB, Note 3.

(O) 973.53, Potassium in Water, Atomic Absorption Spectrophotometric Method. Table IB, Note 3.

(P) 973.54, Sodium in Water, Atomic Absorption Spectrophotometric Method. Table IB, Note 3.

(Q) 973.55, Phosphorus in Water, Photometric Method. Table IB, Note 3.

(R) 973.56, Phosphorus in Water, Automated Method. Table IB, Note 3.

(S) 974.27, Cadmium, Chromium, Copper, Iron, Lead, Magnesium, Manganese, Silver, Zinc in Water, Atomic Absorption Spectrophotometric Method. Table IB, Note 3.

(T) 977.22, Mercury in Water, Flameless Atomic Absorption Spectrophotometric Method. Table IB, Note 3.

(U) 991.15. Total Coliforms and Escherichia coli in Water Defined Substrate Technology (Colilert) Method. Table IA, Note 10; Table IH, Note 10.

(V) 993.14, Trace Elements in Waters and Wastewaters, Inductively Coupled Plasma-Mass Spectrometric Method. Table IB, Note 3.

(W) 993.23, Dissolved Hexavalent Chromium in Drinking Water, Ground Water, and Industrial Wastewater Effluents, Ion Chromatographic Method. Table IB, Note 3.

(X) 993.30, Inorganic Anions in Water, Ion Chromatographic Method. Table IB, Note 3.

(ii) [Reserved]

(14) Applied and Environmental Microbiology, American Society for Microbiology, 1752 N Street NW., Washington DC 20036. (Also available from most public libraries.)

(i) New Medium for the Simultaneous Detection of Total Coliforms and Escherichia coli in Water. Brenner, K.P., C.C. Rankin, Y.R. Roybal, G.N. Stelma, Jr., P.V. Scarpino, and A.P. Dufour. 59:3534-3544, November 1993. Table IH, Note 21.

(ii) [Reserved]

(15) ASTM International, 100 Barr Harbor Drive, P.O. Box C700, West Conshohocken, PA 19428-2959, or online at http://www.astm.org.

(i) Annual Book of ASTM Standards, Water, and Environmental Technology, Section 11, Volumes 11.01 and 11.02. 1994. Tables IA, IB, IC, ID, IE, and IH.

(ii) Annual Book of ASTM Standards, Water, and Environmental Technology, Section 11, Volumes 11.01 and 11.02. 1996. Tables IA, IB, IC, ID, IE, and IH.

(iii) Annual Book of ASTM Standards, Water, and Environmental Technology, Section 11, Volumes 11.01 and 11.02. 1999. Tables IA, IB, IC, ID, IE, and IH.

(iv) Annual Book of ASTM Standards, Water, and Environmental Technology, Section 11, Volumes 11.01 and 11.02. 2000. Tables IA, IB, IC, ID, IE, and IH.

(v) ASTM D511-09, Standard Test Methods for Calcium and Magnesium in Water. May 2009. Table IB.

(vi) ASTM D512-04, Standard Test Methods for Chloride Ion in Water. July 2004. Table IB.

(vii) ASTM D515-88, Test Methods for Phosphorus in Water, March 1989. Table IB.

(viii) ASTM D516-11, Standard Test Method for Sulfate Ion in Water, September 2011. Table IB.

(ix) ASTM D858-12, Standard Test Methods for Manganese in Water. September 2012. Table IB.

(x) ASTM D859-10, Standard Test Method for Silica in Water. July 2010. Table IB.

(xi) ASTM D888-09, Standard Test Methods for Dissolved Oxygen in Water. December 2009. Table IB.

(xii) ASTM D1067-11, Standard Test Methods for Acidity or Alkalinity of Water. April 2011. Table IB.

(xiii) ASTM D1068-10, Standard Test Methods for Iron in Water. October 2010. Table IB.

(xiv) ASTM D1125-95 (Reapproved 1999), Standard Test Methods for Electrical Conductivity and Resistivity of Water. December 1995. Table IB.

(xv) ASTM D1126-12, Standard Test Method for Hardness in Water. March 2012. Table IB.

(xvi) ASTM D1179-10, Standard Test Methods for Fluoride Ion in Water. July 2010. Table IB.

(xvii) ASTM D1246-10, Standard Test Method for Bromide Ion in Water. July 2010. Table IB.

(xviii) ASTM D1252-06, Standard Test Methods for Chemical Oxygen Demand (Dichromate Oxygen Demand) of Water. February 2006. Table IB.

(xix) ASTM D1253-08, Standard Test Method for Residual Chlorine in Water. October 2008. Table IB.

(xx) ASTM D1293-99, Standard Test Methods for pH of Water. March 2000. Table IB.

(xxi) ASTM D1426-08, Standard Test Methods for Ammonia Nitrogen in Water. September 2008. Table IB.

(xxii) ASTM D1687-12 (Approved September 1, 2012), Standard Test Methods for Chromium in Water. August 2007. Table IB.

(xxiii) ASTM D1688-12, Standard Test Methods for Copper in Water. September 2012. Table IB.

(xxiv) ASTM D1691-12, Standard Test Methods for Zinc in Water. September 2012. Table IB.

(xxv) ASTM D1783-01 (Reapproved 2007), Standard Test Methods for Phenolic Compounds in Water. January 2008). Table IB.

(xxvi) ASTM D1886-08, Standard Test Methods for Nickel in Water. October 2008. Table IB.

(xxvii) ASTM D1889-00, Standard Test Method for Turbidity of Water. October 2000. Table IB.

(xxviii) ASTM D1890-96, Standard Test Method for Beta Particle Radioactivity of Water. April 1996. Table IE.

(xxix) ASTM D1943-96, Standard Test Method for Alpha Particle Radioactivity of Water. April 1996. Table IE.

(xxx) ASTM D1976-12, Standard Test Method for Elements in Water by Inductively-Coupled Argon Plasma Atomic Emission Spectroscopy. March 2012. Table IB.

(xxxi) ASTM D2036-09, Standard Test Methods for Cyanides in Water. October 2009. Table IB.

(xxxii) ASTM D2330-02, Standard Test Method for Methylene Blue Active Substances. August 2002. Table IB.

(xxxiii) ASTM D2460-97, Standard Test Method for Alpha-Particle-Emitting Isotopes of Radium in Water. October 1997. Table IE.

(xxxiv) ASTM D2972-08, Standard Tests Method for Arsenic in Water. October 2008. Table IB.

(xxxv) ASTM D3223-12, Standard Test Method for Total Mercury in Water. September 2012. Table IB.

(xxxvi) ASTM D3371-95, Standard Test Method for Nitriles in Aqueous Solution by Gas-Liquid Chromatography, February 1996. Table IF.

(xxxvii) ASTM D3373-12, Standard Test Method for Vanadium in Water. September 2012. Table IB.

(xxxviii) ASTM D3454-97, Standard Test Method for Radium-226 in Water. February 1998. Table IE.

(xxxix) ASTM D3557-12, Standard Test Method for Cadmium in Water. September 2012. Table IB.

(xl) ASTM D3558-08, Standard Test Method for Cobalt in Water. November 2008. Table IB.

(xli) ASTM D3559-08, Standard Test Methods for Lead in Water. October 2008. Table IB.

(xlii) ASTM D3590-11, Standard Test Methods for Total Kjeldahl Nitrogen in Water. April 2011. Table IB.

(xliii) ASTM D3645-08, Standard Test Methods for Beryllium in Water. October 2008. Table IB.

(xliv) ASTM D3695-95, Standard Test Method for Volatile Alcohols in Water by Direct Aqueous-Injection Gas Chromatography. April 1995. Table IF.

(xlv) ASTM D3859-08, Standard Test Methods for Selenium in Water. October 2008. Table IB.

(xlvi) ASTM D3867-04, Standard Test Method for Nitrite-Nitrate in Water. July 2004. Table IB.

(xlvii) ASTM D4190-08, Standard Test Method for Elements in Water by Direct-Current Plasma Atomic Emission Spectroscopy. October 2008. Table IB.

(xlviii) ASTM D4282-02, Standard Test Method for Determination of Free Cyanide in Water and Wastewater by Microdiffusion. August 2002. Table IB.

(xlix) ASTM D4327-03, Standard Test Method for Anions in Water by Chemically Suppressed Ion Chromatography. January 2003. Table IB.

(l) ASTM D4382-12, Standard Test Method for Barium in Water, Atomic Absorption Spectrophotometry, Graphite Furnace. September 2012. Table IB.

(li) ASTM D4657-92 (Reapproved 1998), Standard Test Method for Polynuclear Aromatic Hydrocarbons in Water. January 1993. Table IC.

(lii) ASTM D4658-09, Standard Test Method for Sulfide Ion in Water. May 2009. Table IB.

(liii) ASTM D4763-88 (Reapproved 2001), Standard Practice for Identification of Chemicals in Water by Fluorescence Spectroscopy. September 1988. Table IF.

(liv) ASTM D4839-03, Standard Test Method for Total Carbon and Organic Carbon in Water by Ultraviolet, or Persulfate Oxidation, or Both, and Infrared Detection. January 2003. Table IB.

(lv) ASTM D5257-11, Standard Test Method for Dissolved Hexavalent Chromium in Water by Ion Chromatography. April 2011. Table IB.

(lvi) ASTM D5259-92, Standard Test Method for Isolation and Enumeration of Enterococci from Water by the Membrane Filter Procedure. October 1992. Table IH, Note 9.

(lvii) ASTM D5392-93, Standard Test Method for Isolation and Enumeration of Escherichia coli in Water by the Two-Step Membrane Filter Procedure. September 1993. Table IH, Note 9.

(lviii) ASTM D5673-10, Standard Test Method for Elements in Water by Inductively Coupled Plasma—Mass Spectrometry. September 2010. Table IB.

(lix) ASTM D5(19)907-13, Standard Test Method for Filterable Matter (Total Dissolved Solids) and Nonfilterable Matter (Total Suspended Solids) in Water. July 2013. Table IB.

(lx) ASTM D6503-99, Standard Test Method for Enterococci in Water Using Enterolert. April 2000. Table IA Note 9, Table IH, Note 9.

(lxi) ASTM. D6508-10, Standard Test Method for Determination of Dissolved Inorganic Anions in Aqueous Matrices Using Capillary Ion Electrophoresis and Chromate Electrolyte. October 2010. Table IB, Note 54.

(lxii) ASTM. D6888-09, Standard Test Method for Available Cyanide with Ligand Displacement and Flow Injection Analysis (FIA) Utilizing Gas Diffusion Separation and Amperometric Detection. October 2009. Table IB, Note 59.

(lxiii) ASTM. D6919-09, Standard Test Method for Determination of Dissolved Alkali and Alkaline Earth Cations and Ammonium in Water and Wastewater by Ion Chromatography. May 2009. Table IB.

(lxiv) ASTM. D7065-11, Standard Test Method for Determination of Nonylphenol, Bisphenol A, p-tert-Octylphenol, Nonylphenol Monoethoxylate and Nonylphenol Diethoxylate in Environmental Waters by Gas Chromatography Mass Spectrometry. July 2011. Table IB.

(lxv) ASTM. D7237-10, Standard Test Method for Free Cyanide with Flow Injection Analysis (FIA) Utilizing Gas Diffusion Separation and Amperometric Detection. June 2010. Table IB.

(lxvi) ASTM. D7284-13, Standard Test Method for Total Cyanide in Water by Micro Distillation followed by Flow Injection Analysis with Gas Diffusion Separation and Amperometric Detection. July 2013. Table IB.

(lxvii) ASTM. D7365-09a, Standard Practice for Sampling, Preservation, and Mitigating Interferences in Water Samples for Analysis of Cyanide. October 2009. Table II, Notes 5 and 6.

(lxviii) ASTM. D7511-12, Standard Test Method for Total Cyanide by Segmented Flow Injection Analysis, In-Line Ultraviolet Digestion and Amperometric Detection. January 2012. Table IB.

(lxix) ASTM. D7573-09, Standard Test Method for Total Carbon and Organic Carbon in Water by High Temperature Catalytic Combustion and Infrared Detection. November 2009. Table IB.

(16) Bran & Luebbe Analyzing Technologies, Inc., Elmsford NY 10523.

(i) Industrial Method Number 378-75WA, Hydrogen Ion (pH) Automated Electrode Method, Bran & Luebbe (Technicon) Auto Analyzer II. October 1976. Table IB, Note 21.

(ii) [Reserved]

(17) CEM Corporation, P.O. Box 200, Matthews NC 28106-0200.

(i) Closed Vessel Microwave Digestion of Wastewater Samples for Determination of Metals. April 16, 1992. Table IB, Note 36.

(ii) [Reserved]

(18) Craig R. Chinchilla, 900 Jorie Blvd., Suite 35, Oak Brook IL 60523. Telephone: 630-645-0600.

(i) Nitrate by Discrete Analysis Easy (1-Reagent) Nitrate Method, (Colorimetric, Automated, 1 Reagent). Revision 1, November 12, 2011. Table IB, Note 62.

(ii) [Reserved]

(19) Hach Company, P.O. Box 389, Loveland CO 80537.

(i) Method 8000, Chemical Oxygen Demand. Hach Handbook of Water Analysis. 1979. Table IB, Note 14.

(ii) Method 8008, 1,10-Phenanthroline Method using FerroVer Iron Reagent for Water. 1980. Table IB, Note 22.

(iii) Method 8009, Zincon Method for Zinc. Hach Handbook for Water Analysis. 1979. Table IB, Note 33.

(iv) Method 8034, Periodate Oxidation Method for Manganese. Hach Handbook for Water Analysis. 1979. Table IB, Note 23.

(v) Method 8506, Bicinchoninate Method for Copper. Hach Handbook of Water Analysis. 1979. Table IB, Note 19.

(vi) Method 8507, Nitrogen, Nitrite—Low Range, Diazotization Method for Water and Wastewater. 1979. Table IB, Note 25.

(vii) Method 10206, Hach Company TNTplus 835/836 Nitrate Method 10206, Spectrophotometric Measurement of Nitrate in Water and Wastewater. Revision 2.1, January 10, 2013. Table IB, Note 75.

(viii) Method 10242, Hach Company TNTplus 880 Total Kjeldahl Nitrogen Method 10242, Simplified Spectrophotometric Measurement of Total Kjeldahl Nitrogen in Water and Wastewater. Revision 1.1, January 10, 2013. Table IB, Note 76.

(ix) Hach Method 10360, Luminescence Measurement of Dissolved Oxygen in Water and Wastewater and for Use in the Determination of BOD5 and cBOD5. Revision 1.2, October 2011. Table IB, Note 63.

(x) m-ColiBlue24® Method, for total Coliforms and E. coli. Revision 2, 1999. Table IA, Note 18; Table IH, Note 17.

(20) IDEXX Laboratories Inc., One Idexx Drive, Westbrook ME 04092.

(i) Colilert. 2013. Table IA, Notes 17 and 18; Table IH, Notes 14, 15 and 16.

(ii) Colilert-18. 2013. Table IA, Notes 17 and 18; Table IH, Notes 14, 15 and 16.

(iii) Enterolert. 2013. Table IA, Note 24; Table IH, Note 12.

(iv) Quanti-Tray Insert and Most Probable Number (MPN) Table. 2013. Table IA, Note 18; Table IH, Notes 14 and 16.

(21) In-Situ Incorporated, 221 E. Lincoln Ave., Ft. Collins CO 80524. Telephone: 970-498-1500.

(i) In-Situ Inc. Method 1002-8-2009, Dissolved Oxygen Measurement by Optical Probe. 2009. Table IB, Note 64.

(ii) In-Situ Inc. Method 1003-8-2009, Biochemical Oxygen Demand (BOD) Measurement by Optical Probe. 2009. Table IB, Note 10.

(iii) In-Situ Inc. Method 1004-8-2009, Carbonaceous Biochemical Oxygen Demand (CBOD) Measurement by Optical Probe. 2009. Table IB, Note 35.

(22) Journal of Chromatography, Elsevier/North-Holland, Inc., Journal Information Centre, 52 Vanderbilt Avenue, New York NY 10164. (Also available from most public libraries.

(i) Direct Determination of Elemental Phosphorus by Gas-Liquid Chromatography. Addison, R.F. and R.G. Ackman. 47(3): 421-426, 1970. Table IB, Note 28.

(ii) [Reserved]

(23) Lachat Instruments, 6645 W. Mill Road, Milwaukee WI 53218, Telephone: 414-358-4200.

(i) QuikChem Method 10-204-00-1-X, Digestion and Distillation of Total Cyanide in Drinking and Wastewaters using MICRO DIST and Determination of Cyanide by Flow Injection Analysis. Revision 2.2, March 2005. Table IB, Note 56.

(ii) [Reserved]

(24) Leck Mitchell, Ph.D., P.E., 656 Independence Valley Dr., Grand Junction CO 81507. Telephone: 970-244-8661.

(i) Mitchell Method M5271, Determination of Turbidity by Nephelometry. Revision 1.0, July 31, 2008. Table IB, Note 66.

(ii) Mitchell Method M5331, Determination of Turbidity by Nephelometry. Revision 1.0, July 31, 2008. Table IB, Note 65.

(25) National Council of the Paper Industry for Air and Stream Improvements, Inc. (NCASI), 260 Madison Avenue, New York NY 10016.

(i) NCASI Method TNTP-W10900, Total Nitrogen and Total Phophorus in Pulp and Paper Biologically Treated Effluent by Alkaline Persulfate Digestion. June 2011. Table IB, Note 77.

(ii) NCASI Technical Bulletin No. 253, An Investigation of Improved Procedures for Measurement of Mill Effluent and Receiving Water Color. December 1971. Table IB, Note 18.

(iii) NCASI Technical Bulletin No. 803, An Update of Procedures for the Measurement of Color in Pulp Mill Wastewaters. May 2000. Table IB, Note 18.

(26) The Nitrate Elimination Co., Inc. (NECi), 334 Hecla St., Lake Linden NI 49945.

(i) NECi Method N07-0003, Method for Nitrate Reductase Nitrate-Nitrogen Analysis. Revision 9.0. March 2014. Table IB, Note 73.

(ii) [Reserved]

(27) Oceanography International Corporation, 512 West Loop, P.O. Box 2980, College Station TX 77840.

(i) OIC Chemical Oxygen Demand Method. 1978. Table IB, Note 13.

(ii) [Reserved]

(28) OI Analytical, Box 9010, College Station TX 77820-9010.

(i) Method OIA-1677-09, Available Cyanide by Ligand Exchange and Flow Injection Analysis (FIA). Copyright 2010. Table IB, Note 59.

(ii) Method PAI-DK01, Nitrogen, Total Kjeldahl, Block Digestion, Steam Distillation, Titrimetric Detection. Revised December 22, 1994. Table IB, Note 39.

(iii) Method PAI-DK02, Nitrogen, Total Kjeldahl, Block Digestion, Steam Distillation, Colorimetric Detection. Revised December 22, 1994. Table IB, Note 40.

(iv) Method PAI-DK03, Nitrogen, Total Kjeldahl, Block Digestion, Automated FIA Gas Diffusion. Revised December 22, 1994. Table IB, Note 41.

(29) ORION Research Corporation, 840 Memorial Drive, Cambridge, Massachusetts 02138.

(i) ORION Research Instruction Manual, Residual Chlorine Electrode Model 97-70. 1977. Table IB, Note 16.

(ii) [Reserved]

(30) Technicon Industrial Systems, Tarrytown NY 10591.

(i) Industrial Method Number 379-75WE Ammonia, Automated Electrode Method, Technicon Auto Analyzer II. February 19, 1976. Table IB, Note 7.

(ii) [Reserved]

(31) Thermo Jarrell Ash Corporation, 27 Forge Parkway, Franklin MA 02038.

(i) Method AES0029. Direct Current Plasma (DCP) Optical Emission Spectrometric Method for Trace Elemental Analysis of Water and Wastes. 1986, Revised 1991. Table IB, Note 34.

(ii) [Reserved]

(32) Thermo Scientific, 166 Cummings Center, Beverly MA 01915. Telephone: 1-800-225-1480. www.thermoscientific.com.

(i) Thermo Scientific Orion Method AQ4500, Determination of Turbidity by Nephelometry. Revision 5, March 12, 2009. Table IB, Note 67.

(ii) [Reserved]

(33) 3M Corporation, 3M Center Building 220-9E-10, St. Paul MN 55144-1000.

(i) Organochlorine Pesticides and PCBs in Wastewater Using EmporeTM Disk” Test Method 3M 0222. Revised October 28, 1994. Table IC, Note 8; Table ID, Note 8.

(ii) [Reserved]

(34) Timberline Instruments, LLC, 1880 South Flatiron Ct., Unit I, Boulder CO 80301.

(i) Timberline Amonia-001, Determination of Inorganic Ammonia by Continuous Flow Gas Diffusion and Conductivity Cell Analysis. June 24, 2011. Table IB, Note 74.

(ii) [Reserved]

(35) U.S. Geological Survey (USGS), U.S. Department of the Interior, Reston, Virginia. Available from USGS Books and Open-File Reports (OFR) Section, Federal Center, Box 25425, Denver, CO 80225.

(i) Colorimetric determination of nitrate plus nitrite in water by enzymatic reduction, automated discrete analyzer methods. U.S. Geological Survey Techniques and Methods, Book 5—Laboratory Analysis, Section B—Methods of the National Water Quality Laboratory, Chapter 8. 2011. Table IB, Note 72.

(ii) Methods for Determination of Inorganic Substances in Water and Fluvial Sediments, editors, Techniques of Water-Resources Investigations of the U.S. Geological Survey, Book 5, Chapter A1. 1979. Table IB, Note 8.

(iii) Methods for Determination of Inorganic Substances in Water and Fluvial Sediments, Techniques of Water-Resources Investigations of the U.S. Geological Survey, Book 5, Chapter A1. 1989. Table IB, Note 2.

(iv) Methods for the Determination of Organic Substances in Water and Fluvial Sediments. Techniques of Water-Resources Investigations of the U.S. Geological Survey, Book 5, Chapter A3. 1987. Table IB, Note 24; Table ID, Note 4.

(v) OFR 76-177, Selected Methods of the U.S. Geological Survey of Analysis of Wastewaters. 1976. Table IE, Note 2.

(vi) OFR 91-519, Methods of Analysis by the U.S. Geological Survey National Water Quality Laboratory—Determination of Organonitrogen Herbicides in Water by Solid-Phase Extraction and Capillary-Column Gas Chromatography/Mass Spectrometry With Selected-Ion Monitoring. 1992. Table ID, Note 14.

(vii) OFR 92-146, Methods of Analysis by the U.S. Geological Survey National Water Quality Laboratory—Determination of Total Phosphorus by a Kjeldahl Digestion Method and an Automated Colorimetric Finish That Includes Dialysis. 1992. Table IB, Note 48.

(viii) OFR 93-125, Methods of Analysis by the U.S. Geological Survey National Water Quality Laboratory—Determination of Inorganic and Organic Constituents in Water and Fluvial Sediments. 1993. Table IB, Note 51; Table IC, Note 9.

(ix) OFR 93-449, Methods of Analysis by the U.S. Geological Survey National Water Quality Laboratory—Determination of Chromium in Water by Graphite Furnace Atomic Absorption Spectrophotometry. 1993. Table IB, Note 46.

(x) OFR 94-37, Methods of Analysis by the U.S. Geological Survey National Water Quality Laboratory—Determination of Triazine and Other Nitrogen-containing Compounds by Gas Chromatography With Nitrogen Phosphorus Detectors. 1994. Table ID, Note 9.

(xi) OFR 95-181, Methods of Analysis by the U.S. Geological Survey National Water Quality Laboratory—Determination of Pesticides in Water by C-18 Solid-Phase Extraction and Capillary-Column Gas Chromatography/Mass Spectrometry With Selected-Ion Monitoring. 1995. Table ID, Note 11.

(xii) OFR 97-198, Methods of Analysis by the U.S. Geological Survey National Water Quality Laboratory—Determination of Molybdenum in Water by Graphite Furnace Atomic Absorption Spectrophotometry. 1997. Table IB, Note 47.

(xiii) OFR 98-165, Methods of Analysis by the U.S. Geological Survey National Water Quality Laboratory—Determination of Elements in Whole-Water Digests Using Inductively Coupled Plasma-Optical Emission Spectrometry and Inductively Coupled Plasma-Mass Spectrometry. 1998. Table IB, Note 50.

(xiv) OFR 98-639, Methods of Analysis by the U.S. Geological Survey National Water Quality Laboratory—Determination of Arsenic and Selenium in Water and Sediment by Graphite Furnace—Atomic Absorption Spectrometry. 1999. Table IB, Note 49.

(xv) OFR 00-170, Methods of Analysis by the U.S. Geological Survey National Water Quality Laboratory—Determination of Ammonium Plus Organic Nitrogen by a Kjeldahl Digestion Method and an Automated Photometric Finish that Includes Digest Cleanup by Gas Diffusion. 2000. Table IB, Note 45.

(xvi) Techniques and Methods Book 5-B1, Determination of Elements in Natural-Water, Biota, Sediment and Soil Samples Using Collision/Reaction Cell Inductively Coupled Plasma-Mass Spectrometry. Chapter 1, Section B, Methods of the National Water Quality Laboratory, Book 5, Laboratory Analysis. 2006. Table IB, Note 70.

(xvii) U.S. Geological Survey Techniques of Water-Resources Investigations, Book 5, Laboratory Analysis, Chapter A4, Methods for Collection and Analysis of Aquatic Biological and Microbiological Samples. 1989. Table IA, Note 4; Table IH, Note 4.

(xviii) Water-Resources Investigation Report 01-4098, Methods of Analysis by the U.S. Geological Survey National Water Quality Laboratory—Determination of Moderate-Use Pesticides and Selected Degradates in Water by C-18 Solid-Phase Extraction and Gas Chromatography/Mass Spectrometry. 2001. Table ID, Note 13.

(xix) Water-Resources Investigations Report 01-4132, Methods of Analysis by the U.S. Geological Survey National Water Quality Laboratory—Determination of Organic Plus Inorganic Mercury in Filtered and Unfiltered Natural Water With Cold Vapor-Atomic Fluorescence Spectrometry. 2001. Table IB, Note 71.

(xx) Water-Resources Investigation Report 01-4134, Methods of Analysis by the U.S. Geological Survey National Water Quality Laboratory—Determination of Pesticides in Water by Graphitized Carbon-Based Solid-Phase Extraction and High-Performance Liquid Chormatography/Mass Spectrometry. 2001. Table ID, Note 12.

(xxi) Water Temperature—Influential Factors, Field Measurement and Data Presentation, Techniques of Water-Resources Investigations of the U.S. Geological Survey, Book 1, Chapter D1. 1975. Table IB, Note 32.

(36) Waters Corporation, 34 Maple Street, Milford MA 01757, Telephone: 508-482-2131, Fax: 508-482-3625.

(i) Method D6508, Test Method for Determination of Dissolved Inorganic Anions in Aqueous Matrices Using Capillary Ion Electrophoresis and Chromate Electrolyte. Revision 2, December 2000. Table IB, Note 54.

(ii) [Reserved]

(c) Under certain circumstances, the Director may establish limitations on the discharge of a parameter for which there is no test procedure in this part or in 40 CFR parts 405 through 499. In these instances the test procedure shall be specified by the Director.

(d) Under certain circumstances, the Administrator may approve additional alternate test procedures for nationwide use, upon recommendation by the Alternate Test Procedure Program Coordinator, Washington, DC.

(e) Sample preservation procedures, container materials, and maximum allowable holding times for parameters are cited in Tables IA, IB, IC, ID, IE, IF, IG, and IH are prescribed in Table II. Information in the table takes precedence over information in specific methods or elsewhere. Any person may apply for a change from the prescribed preservation techniques, container materials, and maximum holding times applicable to samples taken from a specific discharge. Applications for such limited use changes may be made by letters to the Regional Alternative Test Procedure (ATP) Program Coordinator or the permitting authority in the Region in which the discharge will occur. Sufficient data should be provided to assure such changes in sample preservation, containers or holding times do not adversely affect the integrity of the sample. The Regional ATP Coordinator or permitting authority will review the application and then notify the applicant and the appropriate State agency of approval or rejection of the use of the alternate test procedure. A decision to approve or deny any request on deviations from the prescribed Table II requirements will be made within 90 days of receipt of the application by the Regional Administrator. An analyst may not modify any sample preservation and/or holding time requirements of an approved method unless the requirements of this section are met.

Table II—Required Containers, Preservation Techniques, and Holding Times

Open Table
Parameter number/name Container1 Preservation23 Maximum holding time4
Table IA—Bacterial Tests
1-5. Coliform, total, fecal, and E. coli PA, G Cool, <10 °C, 0.008% Na2S2O35 8 hours.2223
6. Fecal streptococci PA, G Cool, <10 °C, 0.008% Na2S2O35 8 hours.22
7. Enterococci PA, G Cool, <10 °C, 0.008% Na2S2O35 8 hours.22
8. Salmonella PA, G Cool, <10 °C, 0.008% Na2S2O35 8 hours.22
Table IA—Aquatic Toxicity Tests
9-12. Toxicity, acute and chronic P, FP, G Cool, ≤6 °C16 36 hours.
Table IB—Inorganic Tests
1. Acidity P, FP, G Cool, ≤6 °C18 14 days.
2. Alkalinity P, FP, G Cool, ≤6 °C18 14 days.
4. Ammonia P, FP, G Cool, ≤6 °C,18 H2SO4 to pH <2 28 days.
9. Biochemical oxygen demand P, FP, G Cool, ≤6 °C18 48 hours.
10. Boron P, FP, or Quartz HNO3 to pH <2 6 months.
11. Bromide P, FP, G None required 28 days.
14. Biochemical oxygen demand, carbonaceous P, FP G Cool, ≤6 °C18 48 hours.
15. Chemical oxygen demand P, FP, G Cool, ≤6 °C,18 H2SO4 to pH <2 28 days.
16. Chloride P, FP, G None required 28 days.
17. Chlorine, total residual P, G None required Analyze within 15 minutes.
21. Color P, FP, G Cool, ≤6 °C18 48 hours.
23-24. Cyanide, total or available (or CATC) and free P, FP, G Cool, ≤6 °C,18 NaOH to pH >10,5 6 reducing agent if oxidizer present 14 days.
25. Fluoride P None required 28 days.
27. Hardness P, FP, G HNO3 or H2SO4 to pH <2 6 months.
28. Hydrogen ion (pH) P, FP, G None required Analyze within 15 minutes.
31, 43. Kjeldahl and organic N P, FP, G Cool, ≤6 °C,18 H2SO4 to pH <2 28 days.
Table IB—Metals7
18. Chromium VI P, FP, G Cool, ≤6 °C,18 pH = 9.3-9.720 28 days.
35. Mercury (CVAA) P, FP, G HNO3 to pH <2 28 days.
35. Mercury (CVAFS) FP, G; and FP-lined cap17 5 mL/L 12N HCl or 5 mL/L BrCl17 90 days.17
3, 5-8, 12, 13, 19, 20, 22, 26, 29, 30, 32-34, 36, 37, 45, 47, 51, 52, 58-60, 62, 63, 70-72, 74, 75. Metals, except boron, chromium VI, and mercury P, FP, G HNO3 to pH <2, or at least 24 hours prior to analysis19 6 months.
38. Nitrate P, FP, G Cool, ≤6 °C18 48 hours.
39. Nitrate-nitrite P, FP, G Cool, ≤6 °C,18H2SO4 to pH <2 28 days.
40. Nitrite P, FP, G Cool, ≤6 °C18 48 hours.
41. Oil and grease G Cool to ≤6 °C,18 HCl or H2SO4 to pH <2 28 days.
42. Organic Carbon P, FP, G Cool to ≤6 °C,18 HCl, H2SO4, or H3PO4 to pH <2 28 days.
44. Orthophosphate P, FP, G Cool, to ≤6 °C18 24 Filter within 15 minutes; Analyze within 48 hours.
46. Oxygen, Dissolved Probe G, Bottle and top None required Analyze within 15 minutes.
47. Winkler G, Bottle and top Fix on site and store in dark 8 hours.
48. Phenols G Cool, ≤6 °C,18 H2SO4 to pH <2 28 days.
49. Phosphorous (elemental) G Cool, ≤6 °C18 48 hours.
50. Phosphorous, total P, FP, G Cool, ≤6 °C,18 H2SO4 to pH <2 28 days.
53. Residue, total P, FP, G Cool, ≤6 °C18 7 days.
54. Residue, Filterable P, FP, G Cool, ≤6 °C18 7 days.
55. Residue, Nonfilterable (TSS) P, FP, G Cool, ≤6 °C18 7 days.
56. Residue, Settleable P, FP, G Cool, ≤6 °C18 48 hours.
57. Residue, Volatile P, FP, G Cool, ≤6 °C18 7 days.
61. Silica P or Quartz Cool, ≤6 °C18 28 days.
64. Specific conductance P, FP, G Cool, ≤6 °C18 28 days.
65. Sulfate P, FP, G Cool, ≤6 °C18 28 days.
66. Sulfide P, FP, G Cool, ≤6 °C,18 add zinc acetate plus sodium hydroxide to pH >9 7 days.
67. Sulfite P, FP, G None required Analyze within 15 minutes.
68. Surfactants P, FP, G Cool, ≤6 °C18 48 hours.
69. Temperature P, FP, G None required Analyze within 15 minutes.
73. Turbidity P, FP, G Cool, ≤6 °C18 48 hours.
Table IC—Organic Tests8
13, 18-20, 22, 24, 25, 27,28, 34-37, 39-43, 45-47, 56, 76, 104, 105, 108-111, 113. Purgeable Halocarbons G, FP-lined septum Cool, ≤6 °C,18 0.008% Na2S2O3,5 HCl to pH 2 14 days.
26. 2-Chloroethylvinyl ether G, FP-lined septum Cool, ≤6 °C,18 0.008% Na2S2O35 14 days.
6, 57, 106. Purgeable aromatic hydrocarbons G, FP-lined septum Cool, ≤6 °C,18 0.008% Na2S2O3,5 HCl to pH 29 14 days.9
3, 4. Acrolein and acrylonitrile G, FP-lined septum Cool, ≤6 °C,18 0.008% Na2S2O3, pH to 4-510 14 days.10
23, 30, 44, 49, 53, 77, 80, 81, 98, 100, 112. Phenols11 G, FP-lined cap Cool, ≤6 °C,18 0.008% Na2S2O3 7 days until extraction, 40 days after extraction.
7, 38. Benzidines11 12 G, FP-lined cap Cool, ≤6 °C,18 0.008% Na2S2O35 7 days until extraction.13
14, 17, 48, 50-52. Phthalate esters11 G, FP-lined cap Cool, ≤6 °C18 7 days until extraction, 40 days after extraction.
82-84. Nitrosamines11 14 G, FP-lined cap Cool, ≤6 °C,18 store in dark, 0.008% Na2S2O35 7 days until extraction, 40 days after extraction.
88-94. PCBs11 G, FP-lined cap Cool, ≤6 °C18 1 year until extraction, 1 year after extraction.
54, 55, 75, 79. Nitroaromatics and isophorone11 G, FP-lined cap Cool, ≤6 °C,18 store in dark, 0.008% Na2S2O35 7 days until extraction, 40 days after extraction.
1, 2, 5, 8-12, 32, 33, 58, 59, 74, 78, 99, 101. Polynuclear aromatic hydrocarbons11 G, FP-lined cap Cool, ≤6 °C,18 store in dark, 0.008% Na2S2O35 7 days until extraction, 40 days after extraction.
15, 16, 21, 31, 87. Haloethers11 G, FP-lined cap Cool, ≤6 °C,18 0.008% Na2S2O35 7 days until extraction, 40 days after extraction.
29, 35-37, 63-65, 107. Chlorinated hydrocarbons11 G, FP-lined cap Cool, ≤6 °C18 7 days until extraction, 40 days after extraction.
60-62, 66-72, 85, 86, 95-97, 102, 103. CDDs/CDFs11 G See footnote 11 See footnote 11.
Aqueous Samples: Field and Lab Preservation G Cool, ≤6 °C,18 0.008% Na2S2O3,5 pH <9 1 year.
Solids and Mixed-Phase Samples: Field Preservation G Cool, ≤6 °C18 7 days.
Tissue Samples: Field Preservation G Cool, ≤6 °C18 24 hours.
Solids, Mixed-Phase, and Tissue Samples: Lab Preservation G Freeze, ≤−10 °C 1 year.
114-118. Alkylated phenols G Cool, <6 °C, H2SO4 to pH <2 28 days until extraction, 40 days after extraction.
119. Adsorbable Organic Halides (AOX) G Cool, <6 °C, 0.008% Na2S2O3, HNO3 to pH <2 Hold at least 3 days, but not more than 6 months.
120. Chlorinated Phenolics G, FP-lined cap Cool, <6 °C, 0.008% Na2S2O3, H2SO4 to pH <2 30 days until acetylation, 30 days after acetylation.
Table ID—Pesticides Tests
1-70. Pesticides11 G, FP-lined cap Cool, ≤6 °C,18 pH 5-915 7 days until extraction, 40 days after extraction.
Table IE—Radiological Tests
1-5. Alpha, beta, and radium P, FP, G HNO3 to pH <2 6 months.
Table IH—Bacterial Tests
1-4. Coliform, total, fecal PA, G Cool, <10 °C, 0.008% Na2S2O35 8 hours.22 23
5. E. coli PA, G Cool, <10 °C, 0. 008% Na2S2O35 8 hours.22
6. Fecal streptococci PA, G Cool, <10 °C, 0.008% Na2S2O35 8 hours.22
7. Enterococci PA, G Cool, <10 °C, 0. 008% Na2S2O35 8 hours.22
Table IH—Protozoan Tests
8. Cryptosporidium LDPE; field filtration 1-10 °C 96 hours.21
9. Giardia LDPE; field filtration 1-10 °C 96 hours.21

1“P” is for polyethylene; “FP” is fluoropolymer (polytetrafluoroethylene (PTFE); Teflon®), or other fluoropolymer, unless stated otherwise in this Table II; “G” is glass; “PA” is any plastic that is made of a sterilizable material (polypropylene or other autoclavable plastic); “LDPE” is low density polyethylene.

2Except where noted in this Table II and the method for the parameter, preserve each grab sample within 15 minutes of collection. For a composite sample collected with an automated sample (e.g., using a 24-hour composite sample; see 40 CFR 122.21(g)(7)(i) or 40 CFR part 403, appendix E), refrigerate the sample at ≤6 °C during collection unless specified otherwise in this Table II or in the method(s). For a composite sample to be split into separate aliquots for preservation and/or analysis, maintain the sample at ≤6 °C, unless specified otherwise in this Table II or in the method(s), until collection, splitting, and preservation is completed. Add the preservative to the sample container prior to sample collection when the preservative will not compromise the integrity of a grab sample, a composite sample, or aliquot split from a composite sample within 15 minutes of collection. If a composite measurement is required but a composite sample would compromise sample integrity, individual grab samples must be collected at prescribed time intervals (e.g., 4 samples over the course of a day, at 6-hour intervals). Grab samples must be analyzed separately and the concentrations averaged. Alternatively, grab samples may be collected in the field and composited in the laboratory if the compositing procedure produces results equivalent to results produced by arithmetic averaging of results of analysis of individual grab samples. For examples of laboratory compositing procedures, see EPA Method 1664 Rev. A (oil and grease) and the procedures at 40 CFR 141.24(f)(14)(iv) and (v) (volatile organics).

3When any sample is to be shipped by common carrier or sent via the U.S. Postal Service, it must comply with the Department of Transportation Hazardous Materials Regulations (49 CFR part 172). The person offering such material for transportation is responsible for ensuring such compliance. For the preservation requirement of Table II, the Office of Hazardous Materials, Materials Transportation Bureau, Department of Transportation has determined that the Hazardous Materials Regulations do not apply to the following materials: Hydrochloric acid (HCl) in water solutions at concentrations of 0.04% by weight or less (pH about 1.96 or greater; Nitric acid (HNO3) in water solutions at concentrations of 0.15% by weight or less (pH about 1.62 or greater); Sulfuric acid (H2SO4) in water solutions at concentrations of 0.35% by weight or less (pH about 1.15 or greater); and Sodium hydroxide (NaOH) in water solutions at concentrations of 0.080% by weight or less (pH about 12.30 or less).

4Samples should be analyzed as soon as possible after collection. The times listed are the maximum times that samples may be held before the start of analysis and still be considered valid. Samples may be held for longer periods only if the permittee or monitoring laboratory have data on file to show that, for the specific types of samples under study, the analytes are stable for the longer time, and has received a variance from the Regional ATP Coordinator under §136.3(e). For a grab sample, the holding time begins at the time of collection. For a composite sample collected with an automated sampler (e.g., using a 24-hour composite sampler; see 40 CFR 122.21(g)(7)(i) or 40 CFR part 403, appendix E), the holding time begins at the time of the end of collection of the composite sample. For a set of grab samples composited in the field or laboratory, the holding time begins at the time of collection of the last grab sample in the set. Some samples may not be stable for the maximum time period given in the table. A permittee or monitoring laboratory is obligated to hold the sample for a shorter time if it knows that a shorter time is necessary to maintain sample stability. See §136.3(e) for details. The date and time of collection of an individual grab sample is the date and time at which the sample is collected. For a set of grab samples to be composited, and that are all collected on the same calendar date, the date of collection is the date on which the samples are collected. For a set of grab samples to be composited, and that are collected across two calendar dates, the date of collection is the dates of the two days; e.g., November 14-15. For a composite sample collected automatically on a given date, the date of collection is the date on which the sample is collected. For a composite sample collected automatically, and that is collected across two calendar dates, the date of collection is the dates of the two days; e.g., November 14-15. For static-renewal toxicity tests, each grab or composite sample may also be used to prepare test solutions for renewal at 24 h, 48 h, and/or 72 h after first use, if stored at 0-6 °C, with minimum head space.

5ASTM D7365-09a specifies treatment options for samples containing oxidants (e.g., chlorine) for cyanide analyses. Also, Section 9060A of Standard Methods for the Examination of Water and Wastewater (20th and 21st editions) addresses dechlorination procedures for microbiological analyses.

6Sampling, preservation and mitigating interferences in water samples for analysis of cyanide are described in ASTM D7365-09a. There may be interferences that are not mitigated by the analytical test methods or D7365-09a. Any technique for removal or suppression of interference may be employed, provided the laboratory demonstrates that it more accurately measures cyanide through quality control measures described in the analytical test method. Any removal or suppression technique not described in D7365-09a or the analytical test method must be documented along with supporting data.

7For dissolved metals, filter grab samples within 15 minutes of collection and before adding preservatives. For a composite sample collected with an automated sampler (e.g., using a 24-hour composite sampler; see 40 CFR 122.21(g)(7)(i) or 40 CFR part 403, appendix E), filter the sample within 15 minutes after completion of collection and before adding preservatives. If it is known or suspected that dissolved sample integrity will be compromised during collection of a composite sample collected automatically over time (e.g., by interchange of a metal between dissolved and suspended forms), collect and filter grab samples to be composited (footnote 2) in place of a composite sample collected automatically.

8Guidance applies to samples to be analyzed by GC, LC, or GC/MS for specific compounds.

9If the sample is not adjusted to pH 2, then the sample must be analyzed within seven days of sampling.

10The pH adjustment is not required if acrolein will not be measured. Samples for acrolein receiving no pH adjustment must be analyzed within 3 days of sampling.

11When the extractable analytes of concern fall within a single chemical category, the specified preservative and maximum holding times should be observed for optimum safeguard of sample integrity (i.e., use all necessary preservatives and hold for the shortest time listed). When the analytes of concern fall within two or more chemical categories, the sample may be preserved by cooling to ≤6 °C, reducing residual chlorine with 0.008% sodium thiosulfate, storing in the dark, and adjusting the pH to 6-9; samples preserved in this manner may be held for seven days before extraction and for forty days after extraction. Exceptions to this optional preservation and holding time procedure are noted in footnote 5 (regarding the requirement for thiosulfate reduction), and footnotes 12, 13 (regarding the analysis of benzidine).

12If 1,2-diphenylhydrazine is likely to be present, adjust the pH of the sample to 4.0 ± 0.2 to prevent rearrangement to benzidine.

13Extracts may be stored up to 30 days at <0 °C.

14For the analysis of diphenylnitrosamine, add 0.008% Na2S2O3 and adjust pH to 7-10 with NaOH within 24 hours of sampling.

15The pH adjustment may be performed upon receipt at the laboratory and may be omitted if the samples are extracted within 72 hours of collection. For the analysis of aldrin, add 0.008% Na2S2O3.

16Place sufficient ice with the samples in the shipping container to ensure that ice is still present when the samples arrive at the laboratory. However, even if ice is present when the samples arrive, immediately measure the temperature of the samples and confirm that the preservation temperature maximum has not been exceeded. In the isolated cases where it can be documented that this holding temperature cannot be met, the permittee can be given the option of on-site testing or can request a variance. The request for a variance should include supportive data which show that the toxicity of the effluent samples is not reduced because of the increased holding temperature. Aqueous samples must not be frozen. Hand-delivered samples used on the day of collection do not need to be cooled to 0 to 6 °C prior to test initiation.

17Samples collected for the determination of trace level mercury (<100 ng/L) using EPA Method 1631 must be collected in tightly-capped fluoropolymer or glass bottles and preserved with BrCl or HCl solution within 48 hours of sample collection. The time to preservation may be extended to 28 days if a sample is oxidized in the sample bottle. A sample collected for dissolved trace level mercury should be filtered in the laboratory within 24 hours of the time of collection. However, if circumstances preclude overnight shipment, the sample should be filtered in a designated clean area in the field in accordance with procedures given in Method 1669. If sample integrity will not be maintained by shipment to and filtration in the laboratory, the sample must be filtered in a designated clean area in the field within the time period necessary to maintain sample integrity. A sample that has been collected for determination of total or dissolved trace level mercury must be analyzed within 90 days of sample collection.

18Aqueous samples must be preserved at ≤6 °C, and should not be frozen unless data demonstrating that sample freezing does not adversely impact sample integrity is maintained on file and accepted as valid by the regulatory authority. Also, for purposes of NPDES monitoring, the specification of “≤ °C” is used in place of the “4 °C” and “<4 °C” sample temperature requirements listed in some methods. It is not necessary to measure the sample temperature to three significant figures (1/100th of 1 degree); rather, three significant figures are specified so that rounding down to 6 °C may not be used to meet the ≤6 °C requirement. The preservation temperature does not apply to samples that are analyzed immediately (less than 15 minutes).

19An aqueous sample may be collected and shipped without acid preservation. However, acid must be added at least 24 hours before analysis to dissolve any metals that adsorb to the container walls. If the sample must be analyzed within 24 hours of collection, add the acid immediately (see footnote 2). Soil and sediment samples do not need to be preserved with acid. The allowances in this footnote supersede the preservation and holding time requirements in the approved metals methods.

20To achieve the 28-day holding time, use the ammonium sulfate buffer solution specified in EPA Method 218.6. The allowance in this footnote supersedes preservation and holding time requirements in the approved hexavalent chromium methods, unless this supersession would compromise the measurement, in which case requirements in the method must be followed.

21Holding time is calculated from time of sample collection to elution for samples shipped to the laboratory in bulk and calculated from the time of sample filtration to elution for samples filtered in the field.

22Sample analysis should begin as soon as possible after receipt; sample incubation must be started no later than 8 hours from time of collection.

23For fecal coliform samples for sewage sludge (biosolids) only, the holding time is extended to 24 hours for the following sample types using either EPA Method 1680 (LTB-EC) or 1681 (A-1): Class A composted, Class B aerobically digested, and Class B anaerobically digested.

24The immediate filtration requirement in orthophosphate measurement is to assess the dissolved or bio-available form of orthophosphorus (i.e., that which passes through a 0.45-micron filter), hence the requirement to filter the sample immediately upon collection (i.e., within 15 minutes of collection).

[38 FR 28758, Oct. 16, 1973]


Tried the LawStack mobile app?

Join thousands and try LawStack mobile for FREE today.

  • Carry the law offline, wherever you go.
  • Download CFR, USC, rules, and state law to your mobile device.