1. LawStack
  2. Title 40 - Protection of Environment
  3. Chapter I - ENVIRONMENTAL PROTECTION AGENCY
  4. Subchapter C - AIR PROGRAMS
  5. Part 63 - NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR SOURCE CATEGORIES
  6. Subpart MMMMM - National Emission Standards for Hazardous Air Pollutants: Flexible Polyurethane Foam Fabrication Operations
  7. Topic - Testing and Initial Compliance Requirements
  8. 40 CFR § 63.8798
40 CFR § 63.8798
By what date must I conduct performance tests or other initial compliance demonstrations?
June 9, 2020
CFR

(a) For each loop slitter affected source, you must conduct the initial compliance demonstration by the compliance date that is specified for your source in §63.8786.

(b) For each new or reconstructed flame lamination affected source, you must conduct performance tests within 180 calendar days after the compliance date that is specified for your source in §63.8786 and according to the provisions in §63.7(a)(2).

Previous
§ 63.8806 How do I demonstrate initial compliance with the emission limitations?
Next
§ 63.8800 What performance tests and other procedures must I use to demonstrate compliance with the emission limit for flame lamination?

Tried the LawStack mobile app?

Join thousands and try LawStack mobile for FREE today.

  • Carry the law offline, wherever you go.
  • Download CFR, USC, rules, and state law to your mobile device.

Designed and built by Tekk Innovations LLC, the makers of the LawStack iPhone app or Android app.

© 2020 Tekk Innovations LLC