in accordance with the public notice and hearing provisions of §§773.6, 773.19(b) (1) and (2), and 778.21 and of part 775. (2) OSMRE shall make every effort to approve or disapprove an application for permit revision within 60 days of receipt or such longer time as may be reasonable under the circumstances. If additional time is needed, OSMRE shall notify the

The Presiding Officer shall conduct the hearing in a fair and impartial way, taking action as needed to avoid unnecessary delay, exclude redundant material and maintain order during the proceedings. Representatives of EPA shall introduce the administrative record and be prepared to summarize the basis for the order. The respondent shall have a reasonable opportunity to address relevant issues and present its views through legal counsel or technical advisors. The Presiding Officer may also

(a) General. A recipient of an EPA financial assistance agreement in the amount of $250,000 or less for any single assistance agreement, or of more than one financial assistance agreement with a combined total of $250,000 or less in any one fiscal year, is not required to apply the fair share objective requirements of this subpart. This exemption is limited to the fair share objective requirements of this subpart.

submitting a revision to the New Hampshire State Implementation Plan. (B) State Implementation Plan Revision for a Small Business Technical and Environmental compliance Assistance Program dated January 12, 1993. (C) Letter from the New Hampshire Department of Environmental Services dated May 19, 1994 revising the January 12, 1993 submittal. (ii) Additional

for an alternative means of emission limitation under §60.103a(j) of this subpart. [73 FR 35867, June 24, 2008, as amended at 77 FR 56480, Sep. 12, 2012]

Anode bake plant means a facility which produces carbon anodes for use in a primary aluminum reduction plant. Potroom means a building unit which houses a group of electrolytic cells in which aluminum is produced. Potroom group means an uncontrolled potroom, a potroom which is controlled individually

(a) For all affected facilities subject to compliance with §60.442, the performance test data and results from the performance test shall be submitted to the Administrator as specified in §60.8(a) of the General Provisions (40 CFR part 60, subpart A).

flow rate. In addition, the owner or operator shall determine the total residue (total solids) content of the water entering the control device once per day using Method 209A, “Total Residue Dried at 103-105 °C,” in Standard Methods for the Examination of Water and Wastewater, 15th Edition, 1980 (incorporated by reference—see §60.17). Total residue shall be

conducted prior to collecting CEMS data that will be used for the initial compliance demonstration.

conducted prior to collecting CEMS data that will be used for the initial compliance demonstration.

You must comply with the standards in paragraphs (a) through (d) of this section for each centrifugal compressor affected facility. (a) (1) You must reduce VOC emissions from each centrifugal compressor wet seal fluid degassing system by 95.0 percent or greater. (2) If you use a control device to reduce emissions, you must equip the wet seal fluid degassing system

. (c) (1) If an owner or operator applies for one of the exemptions in this paragraph, then the owner or operator shall maintain records as required in §61.246(i). (2) Any equipment in benzene service that is located at a plant site designed to produce or use less than 1,000 megagrams (1,102 tons) of

§61.341, is exempt from this subpart. No testing, monitoring, recordkeeping, or reporting is required under this subpart for any gaseous stream from a waste management unit, treatment process, or wastewater treatment unit routed to a fuel gas system. [55 FR 8346, Mar. 7, 1990, as amended at 55 FR 37231, Sept. 10, 1990; 58 FR 3095, Jan. 7, 1993; 67 FR 68531

The Federal plans apply to owners and operators of affected facilities that are not covered by an EPA approved and currently effective State or Tribal plan. This Federal plan, or portions thereof, also applies to each affected facility located in any State or portion of Indian country whose approved State or Tribal plan for that area is subsequently vacated in whole or in part. Affected facilities are defined in each Federal plan. (a

(a) This subpart contains emission requirements and compliance schedules for the control of designated pollutants from certain municipal solid waste landfills in accordance with section 111(d) of the Clean Air Act and 40 CFR part 60, subpart B. This municipal solid waste landfills Federal plan applies to each designated facility as defined in §62.14352 of this subpart

, you must petition the EPA Administrator for site-specific operating parameters to be established during the initial performance test and you must continuously monitor those parameters thereafter. You may not conduct the initial performance test until the EPA Administrator has approved the petition. [65 FR 49881, Aug. 15, 2000, as amended at 78 FR 28069, May 13, 2013]

must submit your petition for site-specific operating parameters specified in §62.14463(a)(15) prior to your initial performance test. You may not conduct the initial performance test until the EPA Administrator has approved the petition. [65 FR 49881, Aug. 15, 2000, as amended at 78 FR 28074, May 13, 2013]

obtain a permit under 40 CFR part 70 or 71, provided you are not required to obtain a permit under 40 CFR 70.3(a) or 71.3(a) for a reason other than your status as an area source under this subpart. Notwithstanding the previous sentence, you must continue to comply with the provisions of this subpart applicable to area sources. [60 FR 4963, Jan. 25, 1995, as amended at 61 FR 27787, June 3, 1996; 64 FR 69643, Dec. 14, 1999; 70 FR 75345, Dec. 19, 2005]

combustion unit exhaust stream routinely used to direct fire process unit(s)), resin preparation, blending and forming operations, pressing and board cooling operations, and miscellaneous finishing operations (such as sanding, sawing, patching, edge sealing, and other finishing operations not subject to other national emission standards for hazardous air pollutants (NESHAP)). The affected source also includes onsite storage and preparation of raw materials used in the manufacture of plywood and/or

subpart. (c) This subpart does not apply to any equipment that is subject to subpart CC of this part or to subpart K, Ka, or Kb of 40 CFR part 60. (d) This subpart does not apply to asphalt processing and asphalt roofing manufacturing equipment used for research and development, as defined in §63.8698. (e

(a) You must meet the requirements in paragraphs (a)(1) and (2) of this section. You must meet these requirements at all times. (1) You must meet each emission limit and work practice standard in Table 1 through 3 to this subpart that applies to your EGU, for each EGU at your source, except as provided under §63.10009.

are relevant to the incident findings including contract employees where applicable. (g) Incident investigation reports shall be retained for five years. [61 FR 31722, June 20, 1996, as amended at 82 FR 4701, Jan. 13, 2017; 84 FR 69914, Dec. 19, 2019]

program is designed to promote timely and efficient implementation of goals and requirements of the Act. (b) All sources subject to the operating permit requirements of title V and this part shall have a permit to operate that assures compliance by the source with all applicable requirements. (c) The requirements of this part, including provisions regarding schedules for submission and approval or disapproval of permit applications

§72.10   (Availability of Information); and (j) §72.11   (Computation of Time). In addition, the procedures for appeals of decisions of the Administrator under this part are contained in part 78 of this chapter.

§72.10   (Availability of information); and (j) §72.11   (Computation of time). In addition, the procedures for appeals of decisions of the Administrator under this part are contained in part 78 of this chapter.

§14.29. (b) The open committee discussion. A committee discusses any matter pending before it in an open portion of its meeting unless the meeting has been closed for that matter under §14.27. To the maximum extent feasible, consistent with the policy expressed in

the technical competence and compliance of the CAB, the CAB shall not at that time be withdrawn from the list of CAB's in subpart B of this part. In this instance, the Joint Sectoral Committee or the Joint Committee may decide to carry out a joint verification of the body concerned. After the completion of such verification, the proposal for withdrawal of the CAB may be resubmitted to the other party; and (e) Subsequent to the withdrawal of a CAB listed in subpart B

properly authorized in writing by management. (b) Standard operating procedures shall be established for, but not limited to, the following: (1) Animal room preparation. (2) Animal care. (3) Receipt, identification, storage, handling, mixing, and method of sampling of the test and control articles. (4) Test system observations.

(2) The name of the basic radical combined in such color; and (3) The word “Lake.” (For example, the name of a lake prepared by extending the color Ext. D&C Yellow No. 2 upon a substratum is “Ext. D&C Yellow No. 2—Calcium Lake,” and a lake prepared by extending the barium salt prepared from Ext. D&C Red No. 2 upon the substratum is “Ext. D&C Red No. 2—Barium Lake.”)

(a) The regulations set forth in this subpart define the minimum current good manufacturing practices that are to be used in, and the facilities or controls that are to be used for, the manufacture, processing, packing, or holding of an infant formula. Compliance with these provisions is necessary to ensure that such infant formula provides the nutrients required under