survey cruises with OMAO personnel or other relevant personnel on non-NOAA platforms to ensure that requirements, procedures, and decision-making processes are understood and properly implemented. (4) When deploying any type of sampling gear at sea, SWFSC shall at all times monitor for any unusual circumstances that may arise at a sampling site and use best professional judgment to avoid any potential risks to marine mammals during use of all research equipment.

Federal Government securities. In the absence of collateral, accounts established at financial institutions should, in aggregate, total less than $100,000 to assure both principal and interest are federally insured in full. (2) Short-term. Generally, all investments should be for a relatively short time period (one year or less) to assure that the principal is maintained and readily convertible to cash.

Actions to address genetic issues. NMFS may sample cultured animals to determine genetic lineage and, upon a determination that genetically engineered or transgenic animals were used or possessed at an aquaculture facility, will order the removal of all cultured animals of the species for which such determination was made. In conducting the genetic testing to determine that all broodstock or progeny of such broodstock will be or were originally harvested from U.S. waters of the Gulf, will be or

(a) Caribbean spiny lobster traps and associated buoys. A Caribbean spiny lobster trap used or possessed in the Caribbean EEZ must display the official number specified for the vessel by Puerto Rico or the U.S. Virgin Islands so as to be easily identified. Traps used in the Caribbean spiny lobster fishery that are fished individually, rather than tied together in a trap line, must have at least one buoy attached that floats on

cables within the area between 25 to 50 feet from the locations where the explosives are to be primed. (ii) Tests shall be conducted using a blasting multimeter or other instrument specifically designed for such use. (3) The blasting cable or detonator circuitry shall not come in contact with energized electric equipment, including cables. (b) Before loading boreholes with explosives, each

or diesel fuel transportation units in a permanent underground diesel fuel storage facility. (h) The diesel fuel piping system must not be located in a borehole with electric power cables. (i) Diesel fuel piping systems located in entries must not be located on the same side of the entry as electric cables or power lines. Where it is necessary for piping systems to cross electric cables or power lines, guarding must be provided to

. (2) At least one well test during a calendar half-year for each producing completion, Results on Form BSEE-0128, Semiannual Well Test Report, of the most recent well test obtained. This must be submitted within 45 days after the end of the calendar half-year. (b) You may request an extension from the Regional Supervisor if you

§550.1402 (b) What is the maximum civil penalty? §550.1403 (c) Which violations will BOEM review for potential civil penalties?

(a) You may become qualified to hold a lease on the OCS and obtain a qualification number in accordance with §556.402, if you submit evidence demonstrating that you are: (1) A natural person who is a citizen or national of the United States; (2) A natural person who is an alien lawfully admitted for

grant, including decommissioning and site clearance; (2) Your surety or collateral financial assurance will not be released until 7 years after the lease ends, or a longer period as necessary to complete any appeals or judicial litigation related to your bonded obligation, or for BOEM to determine that all of your obligations under the lease or grant have been satisfied; and (3) BOEM will reduce the amount of your bond or return a

To request an Alternate Use RUE, you must submit to BOEM all of the following: (a) The name, address, e-mail address, and phone number of an authorized representative. (b) A summary of the proposed activities for the use of an existing OCS facility, including: (1) The type of activities that would involve the use of the existing OCS facility;

agent, or by any means consistent with the rules governing service of a summons and complaint under rule 4 of the Federal Rules of Civil Procedure. Service shall be complete upon tender of the notice or order or of the certified mail and shall not be deemed incomplete because of refusal to accept. (b) Designation by any person of an agent for service of notices and orders shall be made in writing to the appropriate State or field office of the Office.

funds to you as follows: (1) We annually distribute State share funds to you as shown in the following table: Open Table For the Federal fiscal year(s) beginning .  .  .

funds to you as follows: (1) We annually distribute Tribal share funds to you as shown in the following table: Open Table For the Federal fiscal year(s) beginning .  .  .

(a) Each IRB shall have at least five members, with varying backgrounds to promote complete and adequate review of research activities commonly conducted by the institution. The IRB shall be sufficiently qualified through the experience and expertise of its members (professional competence), and the diversity of its members, including race, gender, and cultural backgrounds and sensitivity to such issues as community attitudes, to promote respect for its advice and

(a) The presiding officer shall conduct a fair and impartial hearing, avoid delay, maintain order, and assure that a record of the proceeding is made. (b) The presiding officer has the authority to— (1) Set and change the date, time, and place of the hearing upon reasonable notice to the parties; (2) Continue or recess the hearing in whole or in part for a reasonable

*   *   *   *   * Need assistance?

(d) The industry is exempted from the quarterly reports required under §60.7(c). The owner/operator is required to record and report the operating temperature of the control device during the performance test and, as required by §60.7(d), maintain a file of the temperature monitoring results for at

(a) For all affected facilities subject to compliance with §60.582, the performance test data and results from the performance test shall be submitted to the Administrator as specified in §60.8(a). (b) The owner or operator of each affected

(a) Enclosed combustion devices shall be designed and operated to reduce the VOC emissions vented to them with an efficiency of 95 percent or greater or to provide a minimum residence time of 0.75 seconds at a minimum temperature of 816 °C (1,500 °F). (b) Vapor recovery systems (for example, condensers and adsorbers) shall be designed and operated to recover the VOC emissions vented to them with an efficiency of 95 percent or greater

You must comply with the GHG and VOC standards in paragraphs (a) through (d) of this section for each centrifugal compressor affected facility. (a) (1) You must reduce methane and VOC emissions from each centrifugal compressor wet seal fluid degassing system by 95.0 percent. (2) If you use a control device to reduce emissions, you must equip the wet seal fluid

As used in this subpart, all terms not defined here have the meanings given them in the Clean Air Act or subpart A of part 61. The following terms shall have the following specific meanings: (a) Long term stabilization means the addition of material on a uranium mill tailings pile for the purpose of ensuring compliance with the requirements of 40 CFR 192.02(a). These actions shall be considered

If you temporarily close your CISWI unit and restart the unit for the purpose of continuing operation of your CISWI unit, then you must follow the requirements in paragraphs (a), (b), or (c) of this section depending on when you plan to come into compliance with the requirements of this subpart. You are subject to the operating permit requirements of title V of the CAA and 40 CFR part 70 or 71 until you close your CISWI unit and at the time you restart it.

(5) Semi-sealed submerged arc furnaces when producing ferromanganese. (6) Metal oxygen refining (MOR) process. (7) Crushing and screening operations. (8) Fugitive dust sources. (c) A new affected source is one for which construction or reconstruction commenced after August 4, 1998. (d) Table 1 to this subpart

(a) This subpart applies to each new, reconstructed, or existing affected source at leather finishing operations. (b) The affected source subject to this subpart is the collection of all equipment and activities used for the multistage application of finishing materials to adjust and improve the physical and aesthetic characteristics of the leather surface. This subpart applies to the leather finishing operations listed in paragraphs

manufacturing line as defined in §63.8698. (i) If the asphalt roofing manufacturing line is collocated with an asphalt processing facility, the storage tanks that store asphalt flux intended for oxidation in the blowing stills and those tanks that receive asphalt directly from the on-site blowing stills are part of the asphalt processing facility. The remaining asphalt

(d) Except for monitor malfunctions, associated repairs, and required quality assurance or control activities (including, as applicable, calibration checks and required zero and span adjustments), you must monitor continuously (or collect data at all required intervals) at all times that the affected source is operating. This includes periods of startup, shutdown, or malfunction when the affected source is operating. A monitoring malfunction includes, but is not limited to, any sudden, infrequent

§63.9350. (1) You must report each instance in which you did not meet the emission limitation that applies to you. (2) You must report each instance in which you did not meet the requirements in Table 7 to this subpart that apply to you. (c) Startups, shutdowns, and malfunctions: (1) For affected sources prior

average annual heat input requirement set forth in the definitions for coal-fired and oil-fired EGUs in §63.10042. Heat input means heat derived from combustion of fuel in an EGU and does not include the heat derived from preheated combustion air, recirculated flue gases or exhaust gases from other sources (such as stationary gas turbines, internal combustion engines, and industrial boilers).

used for each sterilizer, and typical number of sterilization cycles per year. (5) A statement that the affected source is an area source. (b) You must submit the Initial Notification of Compliance Status to the appropriate authority(ies) specified in §63.9(a)(4). In addition, you must submit a copy of the Initial Notification of