, substituted "Except as provided in subsection (b), section" for "Section", and added subsec. (b).

by employees of the Service when not in uniform as a part of their civilian attire. (b) The term commercial use as used in the regulations of this part refers to use of the “Arrowhead Symbol” or the “Parkscape Symbol” on souvenirs or other items of merchandise presented for sale to the public by private enterprise operating either within or outside of areas of the National Park System. (c) The

(a) Board of Directors.—The board of directors and the responsibilities of the board are as provided in the articles of incorporation. (b) Officers.—The officers and the election of officers are as provided in the articles of incorporation. (c) Nondiscrimination.—The requirements for holding office

Source (Statutes at Large) 60112 36:4811. Nov. 5, 1990, Pub. L. 101–510, title XVI, §1612, 104 Stat. 1738. Statutory Notes and Related Subsidiaries Termination of Reporting Requirements For termination

of this part, the Presidio Trust will refer to the Treasury Offset Program any delinquent, legally enforceable debt for collection by tax refund offset. (b) Notice; certification. At least 60 days prior to referring a debt to the Treasury Offset Program, the Presidio Trust will send notice to the debtor in accordance with the requirements of

. shall be accomplished in a manner that will strengthen F Street as a retail core of Washington, DC. (f) Any development along Pennsylvania Avenue shall be designed so as to support the transformation of the Avenue into an attractive and pleasant place for residents and visitors alike, offering pleasant places to stroll, rest, sit and talk, eat, and shop. (g) All

, payment will be made as close as possible to, but no later than, the discount date. (d) Start date. The period for taking the discount is calculated from the date placed on the proper invoice by the vendor. If there is no invoice date on the invoice by the vendor, the discount period will begin on the date a proper invoice is actually received and date stamped or otherwise annotated by the designated agency office.

limited to a court order directing OPM to require the carrier to pay the amount of benefits in dispute. (d) An action under paragraph (c) of this section to recover on a claim for health benefits: (1) May not be brought prior to exhaustion of the administrative remedies provided in §890.105; (2) May not

(a) This subpart prescribes procedures for— (1) A person who seeks approval to be an independent inspection agency to perform tests, inspections, verifications and certifications of DOT specification cylinders or UN pressure receptacles as required by parts 178 and 180 of this chapter; (2) A person who seeks approval to engage in the requalification (e.g.

Aircraft hydraulic power unit fuel tanks containing a mixture of anhydrous hydrazine and monomethyl hydrazine (M86 fuel) and designed for installation as complete units in aircraft are excepted from the specification packaging requirements of this subchapter when they conform to either of the following conditions: (a) The unit must consist of an aluminum pressure vessel made from tubing and having welded heads. Primary containment of

secured by a locked padlock under the control of a responsible person. (b) Electrical equipment and cables in a cargo space in which Class 1 (explosive) materials are stowed which are energized during the voyage for the safe operation of the ship must meet the requirements of subchapter J of 46 CFR chapter I. Before Class 1 (explosive) materials are loaded aboard a vessel, all cables must be tested by a skilled person to ensure that they are safe and to determine

per violation, except that: Penalties may be assessed against individuals only for willful violations, and, where a grossly negligent violation or a pattern of repeated violations has created an imminent hazard of death or injury to persons, or has caused death or injury, a penalty not to exceed $116,766 per violation may be assessed. Each day a violation continues shall constitute a separate offense. FRA's website at www.fra.dot.gov contains a schedule of

(a) The training and qualification of each roadway worker in charge, or any other employee acting as a roadway worker in charge (e.g., a conductor or a brakeman), who provides for the on-track safety of roadway workers through establishment of working limits or the assignment and supervision of watchmen/lookouts or flagmen shall include, at a minimum: (1) All the on-track safety training and

suspicion testing must be completed if within the eight-hour limit provided for in §219.305.

Instead of providing protection for occupied camp cars in accordance with §218.75 or §218.77, the following methods of protection may be used: (a) When occupied camp cars are on track other than main track:

For each listed packaging capacity, the following table compares the ISO 3574 (IBR, see §171.7 of this subchapter) nominal thickness with the corresponding ISO 3574 minimum thickness. Open Table

(a) Each cargo tank must be equipped with a pressure and vacuum relief system in accordance with §178.345-10 and this section. (b) Type and construction. Vacuum relief devices are not required for cargo tank motor vehicles that are designed to be loaded by vacuum in accordance with

per violation, except that: Penalties may be assessed against individuals only for willful violations, and, where a grossly negligent violation or a pattern of repeated violations has created an imminent hazard of death or injury to persons, or has caused death or injury, a penalty not to exceed $116,766 per violation may be assessed. Each day a violation continues shall constitute a separate offense. FRA's website at www.fra.dot.gov contains a schedule of

4 inch, except that when shims are used at the journal box springs to compensate for wheel diameter variation, the maximum variation may not exceed 11⁄4 inch. The maximum variation in the diameter between any two wheel sets on different trucks on a locomotive that has three-powered-axle trucks may not exceed 1

The following definitions apply to this subpart: Excavation Damage means any impact that results in the need to repair or replace an underground facility due to a weakening, or the partial or complete destruction, of the facility, including, but not limited to, the protective coating, lateral support, cathodic protection or the housing for the line device or facility.

extend the whole width of the bumper. The slots are cut using a saw; their width is the width of the blade used which do not exceed 4.0 mm (0.16 in). (c) Clearance holes for mounting the deformable face are drilled in the cladding sheet mounting flanges (shown in Figure 5). The holes are 20 mm (0.79 in) in diameter. Five holes are drilled in the top flange at a distance of 40 mm (1.57 in) from the top edge of the flange and five holes in the bottom flange at a

at the time the air transportation is sold. Any changes by the passenger to the itinerary are subject to additional collection or refund of the security service fee by the direct air carrier or foreign air carrier, as appropriate. (c) Whether or not the security service fee is collected as required by this part, the direct air carrier or foreign air carrier selling the air transportation is solely liable to TSA for the fee and must remit the fee as required in

§3550.58 are satisfied. (2) No liens prior to the RHS mortgage exist at the time of closing and no junior liens are likely to be taken immediately subsequent to or at the time of closing, unless the other liens are taken as part of a leveraging strategy or the RHS loan is essential for repairs and the senior lien secures an affordable non-RHS loan. Liens junior to the RHS lien may be allowed at loan closing if the

(e) If grant funds are available from other agencies and are transferred for disbursement by RHS, these grant funds will be disbursed in accordance with the agreement governing such other agencies' participation in the project. [62 FR 16469, Apr. 7, 1997, as amended at 79 FR 76013, Dec. 19, 2014]

(a) It may be found cost effective for a State transportation department or county to undertake a federally financed highway construction project by force account when a situation exists in which the rights or resposibilities of the community at large are so affected as to require some special course of action, including situations where there is a lack of bids or the bids received are unreasonable. (b) Pursuant to authority in

State may submit documentation showing why it is in compliance. States will have until September 30 to rebut the initial determination or to come into compliance with 23 U.S.C. and this part. Documentation shall be submitted through NHTSA's Regional Administrators, who will refer the requests to appropriate NHTSA and FHWA offices for review. (c) Each fiscal year, each State determined not to be in compliance with