products formates (salts), (P-16-384) is subject to reporting under this section for the significant new uses described in paragraph (a)(2) of this section. (2) The significant new uses are: (i) Industrial, Commercial, and consumer activities. It is a significant new use to manufacture, process, or use the substance in any manner that results in inhalation exposure.

sulfamates (salts), (P-16-385) is subject to reporting under this section for the significant new uses described in paragraph (a)(2) of this section. (2) The significant new uses are: (i) Industrial, Commercial, and consumer activities. It is a significant new use to manufacture, process, or use the substance in any manner that results in inhalation exposure.

(a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as alkyl perfluorinated acryloyl ester (PMN P-17-270) is subject to reporting under this section for the significant new uses described in paragraph (a)(2) of this section. The requirements of this section do not apply to quantities of the substance after they have been

(a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified as fatty acids, C16 and C18-unsatd., Me esters, chlorinated (PMN P-15-353, CAS No. 1642303-17-0) is subject to reporting under this section for the significant new uses described in paragraph (a)(2) of this section. (2) The significant new uses are:

(a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as organic salt (P-14-482) is subject to reporting under this section for the significant new uses described in paragraph (a)(2) of this section. (2) The significant new uses are: (i)

(a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as alkylaminium-trialkyl-2-[(2-methyl-1-oxo-2-propen-1-yl)oxy]-, halide (1:1), polymer with alpha-(2-methyl-1-oxo-2-propen-1-yl)- omega-alkoxypoly(oxy-1,2-alkanediyl) (PMN P-17-152) is subject to reporting under this section for the significant new uses described in paragraph

(a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified as sulfuric acid, ammonium salt (1:?) (PMN P-18-73, CAS No. 10043-02-4) is subject to reporting under this section for the significant new uses described in paragraph (a)(2) of this section. (2) The significant new uses are:

education programs; vocational education programs in disciplines such as forestry and environmental biology; and environmental education through individual study or voluntary participation in programs offered by organizations such as 4-H, Boy or Girl Scouts, Master Gardeners, etc; (iv) Benefits from serving as replicable models of effective forest stewardship for private landowners; and (v) Recreational benefits such as hiking

determination in accordance with §1303.70; (2) The right of such person to seek dispute resolution services from the FOIA Public Liaison or the OGIS at NARA; (3) The names and titles or positions of each person responsible for the denial of such request; and (4) OMB's estimate of the volume of any requested

Appeal of a decision. (1) We will not consider your appeal if it merely repeats arguments that PHMSA has previously rejected. (2) PHMSA will notify you, in writing, of the action on your appeal within 90 days after the date that PHMSA served you with written notice of its decision on your petition for rulemaking. If we do not issue a decision on your appeal within the 90-day period, and we anticipate a substantial

information means trade secrets or commercial or financial information that is privileged or confidential, as described in 5 U.S.C. 552(b)(4). (1) A trade secret is a secret, commercially valuable plan, formula, process, or device that is used for the making, preparing, compounding, or processing of trade commodities and that can

available means employed for the safe disposal of the leaking material by preventing, so far as practicable, its spread over a wide area, such as by digging trenches to drain to a hole or depression in the ground, diverting the liquid away from streams or sewers if possible, or catching the liquid in containers if practicable. Smoking, and any other source of ignition, in the vicinity of a leaking cargo tank is not permitted. (c) Movement

Where: d = Inside diameter in inches; E = 1.0 welded joint efficiency; except for heads with seams = 0.9; P = Minimum required bursting pressure in p.s.i.; S = Minimum tensile strength of plate material in p.s.i., as prescribed in

satisfy clearance requirements of this section. (b) To provide clearance for passing over retarders, locomotives utilized in hump yard or switching service at hump yard locations may have pilot, snowplow, or end plate maximum height of 9 inches. (1) Each locomotive equipped with a pilot, snowplow, or end plate with clearance above 6 inches shall be prominently stenciled at each end of the locomotive with the words “9-inch Maximum End

authorized speeds of trains; and (3) Length of signal control circuits for each signal indication displayed. (e) The following color scheme is suggested on prints: (1) Installations, relocations, and added signal aspects should be colored, preferably in yellow; (2) Removals, discontinuances, and abandonments should be colored, preferably in red; and

vault or pit is sealed, each opening must have a tight fitting cover without open holes through which an explosive mixture might be ignited, and there must be a means for testing the internal atmosphere before removing the cover; (2) If the vault or pit is vented, there must be a means of preventing external sources of ignition from reaching the vault atmosphere; or (3) If the vault or pit is ventilated, paragraph (a) or (c) of

definition is contained. (c) Definitions used in this part. Owners manual means the document which contains the manufacturers comprehensive vehicle operating and maintenance instructions, and which is intended to remain with the vehicle for the life of the vehicle. Skid number means the

has been delegated the authority to assess civil penalties. NHTSA Enforcement means the NHTSA Associate Administrator for Enforcement, or his or her designee. Notice of violation means a notification of violation and preliminary assessment of penalty issued by the Chief Counsel to a party.

WARNING: This record contains Sensitive Security Information that is controlled under 49 CFR parts 15 and 1520. No part of this record may be disclosed to persons without a “need to know”, as defined in 49 CFR parts 15 and 1520, except with the written permission of the Administrator of the Transportation Security Administration or the Secretary of Transportation. Unauthorized release may result in civil penalty or other action. For U.S. government agencies

(a) Tenant contributions. A tenant's contribution to rent charged for a rental unit in an Agency financed housing project is based on the tenant's income, as calculated on the Agency's tenant certification forms, and the availability of Agency or non-Agency rental subsidies. (1) Tenant contributions. Borrowers must set tenant contributions to rent at the

the property securing the Rural Development loan or against project income. The advance may show as an unsecured project liability on financial statements prepared for year-end reports until such time as it is authorized to be repaid. (e) The payback of the advance (loan) may be permitted by the Servicing Official provided the terms and conditions were mutually agreed to by the borrower and Rural Development at the time of the advance and the financial position of

basis of annual gross cash sales. Scale Production Assessments—Studies that analyze facilities, including processing facilities, for potential Value-added activities in order to determine the size that optimizes construction and other cost efficiencies.

. Irrespective of the fact that the assembly of the motors might involve such a substantial change that the motor could be considered a product of the United States, no exemption may be given for the value of the electric motors, since they were exported after manufacture or production in the United States under the provision of subheading 9813.00.05, HTSUS (19 U.S.C. 1202).