appropriate agency procedures. At the request of the claimant, the agency may forward the claim to OPM on the claimant's behalf. The claimant is responsible for ensuring that OPM receives all the information requested in paragraph (c) of this section. (c) FLSA claim filed with OPM. An FLSA claim filed with OPM must be made in writing and must be signed by the claimant or the claimant's representative. Relevant information may be

may not administer a licensing or certification program in a manner that subjects qualified individuals with handicaps to discrimination on the basis of handicap, nor may the agency establish requirements for the programs or activities of licensees or certified entities that subject qualified individuals with handicaps to discrimination on the basis of handicap. However, the programs or activities of entities that are licensed or certified by the agency are not, themselves, covered by this

(c) The label shall be placed directly on the visible exterior of the wrappings and packaging in which the product is placed for sale, shipment, or storage. If the product has more than one layer of external wrapping or packaging, the label must be attached to the innermost layer adjacent to the product. If the innermost layer of product wrapping or packaging does not have a visible exterior surface larger than 5 square inches, either a tag meeting the requirements of paragraph (d

persons to discrimination on the basis of handicap, nor may the agency establish requirements for the programs or activites of licensees or certified entities that subject qualified handicapped persons to discrimination on the basis of handicap. However, the programs or activities of entities that are licensed or certified by the agency are not, themselves, covered by this part. (c) The exclusion of nonhandicapped persons from the benefits of a program limited by

persons to discrimination on the basis of handicap, nor may the agency establish requirements for the programs or activites of licensees or certified entities that subject qualified handicapped persons to discrimination on the basis of handicap. However, the programs or activities of entities that are licensed or certified by the agency are not, themselves, covered by this part. (c) The exclusion of nonhandicapped persons from the benefits of a program limited by

other institution or organization. (k) Special Government Employee means an officer or employee of the Corporation who is retained, designated, appointed or employed to perform, with or without compensation, for not more than 130 days during any period of 365 consecutive days, temporary duties either on a full time or intermittent basis (

Act (Pub. L. 92-513), as amended by the Energy Policy and Conservation Act (Pub. L. 94-163); Administrator means the Administrator of the National Highway Traffic Safety Administration; Affected model year means a model year for which an exemption and alternative average fuel economy standard are requested under this part;

, that respondent shall pay. (e) Transmittal. The Presiding Officer shall transmit to the Administrator for decision all offers of settlement and accompanying memoranda that meet the requirements enumerated in paragraph (d) of this section. The Presiding Officer may, but need not, recommend acceptance or rejection of such offers. Any party or participant may object to a proposed consent agreement by filing a motion and supporting

The type and thickness of material for DOT 406 specification cargo tanks must conform to §178.345-2, but in no case may the thickness be less than that determined by the minimum thickness requirements in §178.320(a). The following Tables I and II identify the

of the State or municipality: (1) Establishes a minimum cover of less than 24 inches (610 millimeters); (2) Requires that mains be installed in a common trench with other utility lines; and (3) Provides adequately for prevention of damage to the pipe by external forces. (e) Except as provided in paragraph (c) of this section, all pipe installed in a navigable

subpart in every respect both before and after being used in vehicle tests specified in Standard No 214 §571.214 of this chapter. (c) Disassembly, inspection, and assembly procedures; external dimensions and weight; and a dummy drawing list are set forth in the Side Impact Dummy (SID) User's Manual, dated May 1994 except for pages 7, 20 and 23, and appendix A (consisting

A (c) Adjacent segments are joined in a manner such that except for contacts existing under static conditions, there is no contact between metallic elements throughout the range of motion or under simulated crash-impact conditions. (d) The structural properties of the dummy are such that the dummy conforms to this part in every respect both before and after its

(a) The neck assembly consists of parts shown in drawing 180-2000. For purposes of this test, the neck assembly is mounted within the headform assembly (180-9000) as shown in Figure V1 in appendix A to this subpart. When subjected to the test procedure specified in paragraph (b) of this section, the neck-headform assembly shall meet the performance requirements specified in paragraph (c) of this section. (b)

used by private industry (i.e., a shipper, manufacturer, or carrier), it must be clearly and legibly marked with a unique company name (or logotype) and identification number. (e) Customs acceptance. Seals will be considered as acceptable for use and/or purchase by U.S. Customs as soon as the manufacturer attests that the seals have been tested and meet or exceed the standards provided in paragraphs (a) through (d) of this

(4) A table of contents and a table of cited authorities; and (5) A conclusion that states a proposal for CBP's determination as to evasion.

as a type designation for an American wine only if that name has been approved by the Administrator. A list of approved grape variety names appears in subpart J of this part. [T.D. ATF-370, 61 FR 538, Jan. 8, 1996, as amended by T.D. TTB-91, 76 FR 5476, Feb. 1, 2011]

(a) Name. The name of the viticultural area described in this section is “Cienega Valley.” (b) Approved maps. The appropriate maps for determining the boundaries of the Cienega Valley viticultural area are four U.S.G.S. maps. They are titled: (1) “Hollister Quadrangle, California,” 7.5 minute series (1971);

(a) Name. The name of the viticultural area described in this section is “Paicines.” (b) Approved maps. The appropriate maps for determining the boundaries of the Paicines viticultural area are the three U.S.G.S. maps. They are titled: (1) “Tres Pinos Quadrangle, California,” 7.5 minute series (1971);

(a) Name. The name of the viticultural area described in this section is “Bennett Valley”. (b) Approved maps. The appropriate maps for determining the boundary of the Bennett Valley viticultural area are four 1:24,000 scale USGS topographic maps. They are titled: (1) Santa Rosa Quadrangle, CA—Sonoma Co. 1994

(a) Name. The name of the viticultural area described in this section is “Squaw Valley-Miramonte.” For purposes of part 4 of this chapter, “Squaw Valley-Miramonte” is a term of viticultural significance. (b) Approved maps. The six United States Geological Survey (USGS) 1:24,000 scale topographic maps used to determine the boundary of the Squaw Valley

administer a licensing or certification program in a manner that subjects qualified individuals with handicaps to discrimination on the basis of handicap, nor may the agency establish requirements for the programs or activities of licensees or certified entities that subject qualified individuals with handicaps to discrimination on the basis of handicap. However, the programs or activities of entities that are licensed or certified by the agency are not, themselves, covered by this regulation.

on a daily basis during survey cruises with OMAO personnel or other relevant personnel on non-NOAA platforms to ensure that requirements, procedures, and decision-making processes are understood and properly implemented. (4) When deploying any type of sampling gear at sea, SWFSC shall at all times monitor for any unusual circumstances that may arise at a sampling site and use best professional judgment to avoid any potential risks to marine mammals during use of

Candidate. Any species being considered by the Secretary for listing as an endangered or threatened species, but not yet the subject of a proposed rule. Conserve, conserving, and conservation. To use and the use of all methods and procedures that are necessary to bring any endangered or threatened species to the point at which the measures provided pursuant

§250.1932) (17) Reporting Unsafe Working Conditions (see §250.1933). (b) You must include a job safety analysis (JSA) for OCS activities identified or discussed in your SEMS program (see §250.1911).

(2) Other coastal or marine resources are not present or affected; (3) Other factors such as technological advances affect information needs; or (4) Information is not necessary or required for a State to determine consistency with their CZMA Plan. (d) Referencing. In preparing your proposed plan or document, you may reference

Except as provided in §827.13 of this part, the construction, operation, maintenance, modification, reclamation, and removal activities at coal preparation plants shall comply with the following: (a) Signs and markers for the coal preparation plant, coal processing waste disposal area, and water-treatment facilities shall comply with

209, Fossil Fuel-Steam Generator Facility, submitted on October 13, 1977, is disapproved; and Rule 408, Fuel Burning Equipment, previously approved in the June 30, 1972, submittal, is retained and shall remain in effect for Federal enforcement purposes. (iii) Tuolumne County APCD. (A) Rule 210, submitted on October 15, 1979, is disapproved; and Rule 407, previously approved in the June 30, 1972 submittal, is retained.

secondary inorganic arsenic emissions. Shutdown means the cessation of operation of a stationary source for any reason. Skimming means the removal of slag from the molten converter bath.