, compds. with 2-(alkylamino)alkanol (PMN P-16-493) is subject to reporting under this section for the significant new uses described in paragraph (a)(2) of this section. The requirements of this section do not apply to quantities of the substance after they have been reacted (cured). (2) The significant new uses are: (i) Industrial, commercial, and consumer activities. Requirements as specified

(a) Chemical substance and significant new used subject to reporting. (1) The chemical substance identified as 1,3-propanediol, 2-ethyl-2-(hydroxymethyl)-, polymer with 2-(chloromethyl)oxirane, reaction products with polyethylene-polypropylene glycol 2-aminopropyl Me ether (PMN P-17-183, CAS No 1627528-04-4) is subject to reporting under this section for the significant new uses described in

(a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified as poly(oxy-1,2-ethanediyl), .alpha.-(2-methyl-2-propen-1-yl)-.omega.-hydroxy- (PMN P-17-271, CAS No. 31497-33-3) is subject to reporting under this section for the significant new uses described in paragraph (a)(2) of this section. The requirements of this section do not apply to

(a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified as 1,2-Cyclohexanedicarboxyliccyclohexanedicarboxylic acid, 1-(phenylmethyl) ester, ester with 2,2,4-trimethyl-1,3-pentanediol mono(2-methylpropanoate) (P-16-422, CAS No. 1661012-65-2) is subject to reporting under this section for the significant new uses described in paragraph (a)(2) of

′-oxybis[ethanol], 1,1′-oxybis[2-propanol] and 1,2-propanediol) (PMN P-17-239) is subject to reporting under this section for the significant new uses described in paragraph (a)(2) of this section. (2) The significant new uses are: (i) Industrial, commercial, and

(a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as unsaturated polyfluoro ester (P-17-245) is subject to reporting under this section for the significant new uses described in paragraph (a)(2) of this section. (2) The significant new uses are: (i)

Additional onshore oil and gas orders shall be published in the Federal Register for public comment and codified in the CFR. (3) Applicability of onshore oil and gas orders. Onshore Oil and Gas Orders issued pursuant to this section are binding on all operations conducted on National Forest System lands, unless otherwise provided therein.

discussions of the following topics: (1) Purpose and need for the proposed action. (2) Description of the proposed action. (3) Alternatives considered, including a No Action alternative. (4) Environmental effects of the proposed action and the alternatives, including mitigation measures. (5) Listing of agencies, organizations, and/or

that he has complied with the requirements of this paragraph. The Chief Counsel may notify other persons participating in the proceeding of the comments and provide an opportunity for those other persons to respond. [Amdt. 107-3, 41 FR 38171, Sept. 9, 1976, as amended by Amdt. 107-24, 56 FR 8621, Feb. 28, 1991; Amdt. 107-25, 57 FR 20429, May 13, 1992; Amdt. 107-38, 61 FR 21099, May 9, 1996; 71 FR 30068, May 25, 2006]

than tank builder) DEF (b) On Class DOT-111 tank cars, the last numeral of the specification number may be omitted from the stamping; for example, DOT-111A100W. (c) After July 25, 2012, newly constructed DOT tank cars must have their DOT specification and other required information stamped plainly and permanently on stainless steel identification plates in

(e) Any person submitting written comments to the Administrator with respect to an application filed under this section shall send a copy of the comments to the applicant. The person shall certify to the Administrator that he or she has complied with the requirements of this paragraph. The Administrator may notify other persons participating in the proceeding of the comments and provide an opportunity for those other persons to respond.

Driver's Certification I certify that the following is a true and complete list of traffic violations (other than parking violations) for which I have been convicted or forfeited bond or collateral during the past 12 months. Date of conviction      Offense Location      Type of motor vehicle operated If no violations are listed above, I certify that I have not been convicted or forfeited bond or collateral on account of

(e) Any driver who has diabetes mellitus treated with insulin for control and who has obtained a medical examiner's certificate under the standards in §391.46, if such driver's most recent medical examination and certification as qualified to drive did not occur during the preceding 12 months; (f) Any driver whose ability to perform his or her

decided by the Associate Administrator for Administration. A motion to modify, limit, or quash must be filed not later than 15 days after the service of the process or five days before the return date specified in the process, whichever is earlier, except that, if the process is served within five days of its return date, such motion may be filed at any time before the return date. Any motion must set forth the grounds and theories of why and how the party believes the process should be modified

Unless otherwise provided in this subchapter, the following explosives shall not be offered for transportation or transported: (a) An explosive that has not been approved in accordance with §173.56 of this subpart. (b) An explosive mixture or device containing a chlorate and also containing:

(1) Private highway-rail grade crossings that are located in New Quiet Zones or New Partial Quiet Zones and allow access to the public, or which provide access to active industrial or commercial sites, must be evaluated by a diagnostic team and equipped or treated in accordance with the recommendations of such diagnostic team. (2) The public authority shall provide the State agency responsible for grade crossing safety and all affected railroads an

that for cargo tanks constructed in accordance with part UHT in Section VIII of the ASME Code the original test pressure must be at least twice the cargo tank design pressure. (b) Weld testing and inspection. (1) Each cargo tank constructed in accordance with part UHT in Section VIII of the ASME Code must be subjected, after postweld heat treatment and hydrostatic tests, to a wet fluorescent

, DC 20590 or at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, call 202-741-6030, or go to http://www.archives.gov/federal__register/code__of__federal__regulations/ibr__locations.html; (2) Meeting new design standards and changes to existing design standards approved by FRA pursuant to

Transitional exception—A marking in conformance with the requirements of this paragraph in effect on December 31, 2014, may continue to be used until December 31, 2016. (2) For domestic transportation, a packaging marked prior to January 1, 2017 and in conformance with the requirements of this paragraph in effect on December 31, 2014, may continue in service until the end of its useful life. (b) The border of the square

order in whole or in part, the respondent must comply with the terms of the decision within 20 days of the respondent's receipt thereof, or within the time prescribed in the order. If the respondent does not comply with the terms of the decision within 20 days of receipt, or within the time prescribed in the order, the case may be referred to the Attorney General for action to enforce the terms of the decision. (e) The filing of an appeal stays the effectiveness of an

submitted and the planned follow-up or future corrective action, including the anticipated schedule for starting and concluding such action. [Amdt. 195-39, 53 FR 24950, July 1, 1988; 53 FR 29800, Aug. 8, 1988, as amended by Amdt. 195-42, 54 FR 32344, Aug. 7, 1989; Amdt. 195-44, 54 FR 40878, Oct. 4, 1989; Amdt. 195-50, 59 FR 17281, Apr. 12, 1994; Amdt. 195-61, 63 FR 7723, Feb. 17, 1998; Amdt. 195-100, 80 FR 12780, Mar. 11, 2015]

is perpendicular to the thoracic spine box. Apply the force at any torso deflection rate between 0.5 and 1.5 degrees per second up to 40 degrees of flexion but no further; continue to apply for 10 seconds the force necessary to maintain 40 degrees of flexion, and record the highest applied force at that time. Release all force as rapidly as possible and measure the return angle 3 minutes after the release.

program standard and referenced procedures; and (2) Certification that the system safety program plan and the system security plan have been developed, reviewed, and approved. (c) Annual submission. Before March 15 of each year, the oversight agency must submit the following to FTA: (1) A publicly available annual report summarizing its oversight activities for the

authorized officer or attorney of the corporation and the corporate seal must be affixed immediately adjoining the signature of the person executing the bond, as provided for in §113.25. (c) Bond executed by an officer of corporation. When a bond is executed by an officer of a corporation, a power of attorney will not be required if the

, as required by §223.18(a), Bureau of the Fiscal Service Regulations (31 CFR 223.18(a)). The port director, Fines, Penalties, and Forfeitures Officer, and Director, Revenue Division will be informed in writing of Headquarters action regarding their request for removal of the surety. [T.D. 84-213, 49 FR 41171, Oct. 19, 1984, as amended by T.D. 91-77, 56 FR 46115, Sept. 10, 1991; T.D. 95-77, 60 FR 50020, Sept. 27, 1995; T.D. 99-27, 64 FR 13675, Mar. 22

(a) Except as provided in paragraph (b) of this section, no person engaged in business as a producer, rectifier, blender, importer, or wholesaler of wine, directly or indirectly or through an affiliate, shall sell or ship or deliver for sale or shipment, or otherwise introduce in interstate or foreign commerce, or receive therein, or remove from customs custody, any wine unless such wine is bottled or packed in the standard wine containers herein prescribed.