(1) Soak the dummy in a controlled environment at any temperature between 20.6 and 22.2 °C (69 and 72 °F) and at any relative humidity between 10 and 70 percent for at least four hours prior to a test. These temperature and humidity levels shall be maintained throughout the entire testing period specified in this section. (2) The test dummy is clothed in a cotton-polyester based tight fitting sweat shirt with long sleeves and ankle long pants

standards and testing procedures; and (7) Procedures and resources necessary for operations and management of the system. (d) Upon completion of the regional ITS architecture required in §§940.9(b) or 940.9(c), the final design of all ITS projects funded with highway trust funds shall accommodate the interface requirements and information

, or its electronic equivalent, in the form set forth below, signed by the foreign seller or owner of the article. If the article was mined, produced, or manufactured wholly or in part in a country other than that from which it was exported to the United States, an additional certificate, or its electronic equivalent, in such form and signed by the last owner or seller in such other country, substituting the facts of transportation from such other country for the statements with respect to shipment

)(1) Limitation: Maximum Merchandise Processing Fee 485 (b)(8)(A)(ii) (b)(1)(ii) Fee: Surcharge for Manual Entry or Release 3 (a)(10)(C)(i)

for cordials and liqueurs, flavored brandy, flavored gin, flavored rum, flavored vodka, and flavored whisky or as authorizing any product which is defined in §5.22(j), Class 10, as an imitation to be otherwise designated. (2) [Reserved] [T.D. 7020, 34 FR 20337, Dec. 30, 1969, as amended by T.D. ATF-360, 59 FR 67222, 67223

(a) Name. The name of the viticultural area described in this section is “Santa Maria Valley”. For purposes of part 4 of this chapter, “Santa Maria Valley” is a term of viticultural significance. (b) Approved maps. The six United States Geological Survey maps used to determine the boundary of the Santa Maria Valley viticultural area are titled:

(a) Name. The name of the viticultural area described in this section is “Hudson River Region.” (b) Approved maps. The approved maps for determining the boundaries of Hudson River Region viticultural area are four U.S.G.S. maps, as follows: (1) Albany (NK 18-6), scale of 1:250,000 series; (2

(a) Name. The name of the viticultural area described in this section is “Monticello.” (b) Approved maps. Approved maps for the Monticello viticultural area are three 1971 U.S.G.S. maps titled: (1) Charlottesville Quadrangle, Virginia: 1:250,000 minute series; (2) Roanoke Quadrangle, Virginia

(a) Name. The name of the viticultural area described in this section is “Southeastern New England.” (b) Approved maps. The approved maps for determining the boundary of the Southeastern New England viticultural area are three U.S.G.S. maps. They are entitled: (1) “Boston, Mass.; N.H.; Conn.; R.I.; Maine”, scaled 1:250,000

(a) Name. The name of the viticultural area described in this section is “Knights Valley.” (b) Approved maps. The appropriate maps for determining the boundaries of the Knights Valley viticultural area are four U.S.G.S. maps. They are— (1) “Mount St. Helena Quadrangle, California,” 7.5 minute series, 1959 (Photoinspected 1973

(a) Name. The name of the viticultural area described in this section is “Borden Ranch”. For purposes of part 4 of this chapter, “Borden Ranch” is a term of viticultural significance. (b) Approved maps. The six United State Geological Survey, 1:24,000 scale, topographic quadrangle maps used to determine the boundary of the Borden Ranch viticultural area are

(a) Name. The name of the viticultural area described in this section is “Tip of the Mitt”. For purposes of part 4 of this chapter, “Tip of the Mitt” is a term of viticultural significance. (b) Approved maps. The 2 United States Geological Survey (USGS) 1:250,000 scale topographic maps used to determine the boundary of the Tip of the Mitt viticultural area

This general-use formula describes an article containing not less than 10% essential oils by volume made with a formulation of S.D.A. authorized for that article on the following list: Open Table Article

for sale. 812.   Product development and pilot plant uses (own use only).

extirpation of a population at a given time (e.g., endangered, threatened, vulnerable, non-threatened, or insufficiently known). Sustainable use means the use of a species in a manner and at a level such that populations of the species are maintained at biologically viable levels for the long term and involves a determination of the productive capacity of the species and its ecosystem, in order to ensure that utilization does not

financed (or otherwise paid) prior to the submission of a loan application. (3) Notwithstanding paragraph (a)(2) of this section, the Program may refinance the refurbishing cost of a vessel whose initial refurbishing cost has already been financed (or otherwise paid) prior to the submission of a loan application. (4) The Program may finance or refinance the purchase or refurbishment of any vessel or facility for which the Secretary has

Party; or (iv) Was not represented by an agent for service of process in accordance with the Treaty; or (2) There is probable cause to believe that the fishing vessel— (i) Was used in violation of section 5(a)(4), (a)(5), (b)(2), or (b)(3) of the Act; (ii) Used an aircraft in violation of section 5(b)(7) of the Act; or

aThe tribal allocation is further reduced by 1.5 percent for discard mortality resulting in 553 mt in 2019. bThe open access HG is taken by the incidental OA fishery and the directed OA fishery. cThe trawl allocation is 58 percent of the limited entry HG. dThe limited entry fixed

aThe tribal allocation is further reduced by 1.5 percent for discard mortality resulting in 563 mt in 2020. bThe open access HG is taken by the incidental OA fishery and the directed OA fishery. cThe trawl allocation is 58 percent of the limited entry HG. d

As used in §§665.600 through 665.619: PRIA bottomfish fishing permit means the permit required by §665.603 to use a vessel to fish for PRIA bottomfish MUS in the EEZ around the PRIA, or to land

DOCD submitted under §550.266, the Regional Supervisor will make a public information copy of the DPP or DOCD and its accompanying information available for review to any appropriate interstate regional entity and the public at the appropriate BOEM Regional Public Information Office. Any interested Federal agency or person may submit comments and recommendations to the Regional Supervisor. Comments

For the Federal fiscal years beginning .  .  . The amount of historic coal funds we annually distribute to you will be .  .  . (1) October 1, 2007 and October 1, 2008 50 percent of the amount we

-specification used oil for energy recovery in accordance with 40 CFR part 279, subpart G, provided the purged process fluid is not hazardous waste as defined in 40 CFR part 261. (c) In-situ sampling systems and sampling systems without purges are exempt from the requirements of paragraphs (a) and (b) of this section.

Yes 63.9 (b)(2), (b)(4), (b)(5), (b)(6), (d), (e), (f), (g), (h)(2), (h)(4), (h)(5) No Requirements for initial notifications and notifications of compliance status are specified in

consistent with safety and good air pollution control practices for minimizing emissions. The general duty to minimize emissions does not require the owner or operator to make any further efforts to reduce emissions if levels required by the applicable standard have been achieved. Determination of whether a source is operating in compliance with operation and maintenance requirements will be based on information available to the Administrator which may include, but is not limited to, monitoring results

(a) Compliance schedule. The owner or operator shall comply with this section no later than the compliance dates specified in the referencing subpart. (b) Compliance standard. Except during pressure releases as provided for in paragraph (c) of this section, or as otherwise specified in

For the following device: You must meet the following operating limit: And you must demonstrate continuous compliance with operating limits by: 1. Thermal oxidizer a. The average combustion temperature in any 3-hour period must not fall below the combustion temperature limit established

Include some pre-plan measurements to demonstrate the profile of mercury concentration in the cell room and how the selected sampling locations ensure conducted representativeness. 3. Quality assurance/quality control procedures for your mercury monitoring system Include a description of how you will keep records or other means to demonstrate that the system is operating