For the purpose of §172.170— (a) Design calculations must include both side and bottom damage, applied separately; and (b) Damage must consist of the penetrations having the dimensions given in Table 172.180 except that, if the most disabling penetrations would be less than the penetrations given in

(3) Limitation.—The Commission shall— (A) limit the scope of any filing ordered under this section to fulfill the objective of the order; and (B) provide a reasonable period of time for respondents to respond based upon their capabilities and the scope of the order. (b) Conference Minutes.—Conference minutes required

(2) Show the dates on which the tests and examinations were conducted; and, (3) Indicate that the cargo gear described in the certificate or register complies with the standards of the organization or association authorized to issue the certificate or register. (c) Competent persons for the purposes of this section are defined as— (1) Surveyors of a classification society recognized by the

(a) The provisions of “Standard for The Control of Gas Hazards on Vessels to be Repaired,” NFPA No. 306, published by National Fire Protection Association, 1 Batterymarch Park, Quincy, MA 02669, shall be used as a guide in conducting the inspections and issuance of certificates required by this section. (b) Until an inspection has been made to determine that such operation can be undertaken with safety, no alterations, repairs, or

that this section comply with the requirements of 44 U.S.C. 3507(f), which requires that agencies display a current control number assigned by the OMB for each approved agency information collection requirement. (b) Display. Open

Inspection and testing required when making alterations, repairs, or other such operations involving riveting, welding, burning, or like fire-producing actions are as follows: (a) The provisions of “Standard for the Control of Gas Hazards on Vessels to be Repaired”, NFPA No. 306, published by National Fire Protection Association, 1 Batterymarch Park, Quincy, MA 02269 shall be used as a guide in conducting the inspections and issuance

15 U.S.C. 78l(b) or (g)) and listed on a national securities exchange or listed in an automated inter-dealer quotation system of a national securities association, profit (including any loss avoided) may be measured by comparing the difference between the amount paid or received for the equity security on the date of the transaction during the blackout period and the average market price

section. (c) Each prospectus or §230.135 communication filed under this section must identify the filer, the company that is the subject of the offering and the Commission file number for the related registration statement or, if that file number is unknown, the subject company's Exchange Act or Investment Company Act file number, in the upper right corner of the cover

§240.15Ca2-1 et seq. of this title. The Commission is responsible for the interpretation of the definitions of government securities broker and government securities dealer and of the regulations at §240.15Ca2-1 et seq. (c) Section 15C(a)(1)(B)(i) of the Act (

§249.310) for the asset-backed securities or in an effective registration statement under the Securities Act or a prospectus timely filed pursuant to §230.424 of this chapter under the same Central Index Key (CIK) code as the current annual report on Form 10-K. [70 FR 1597, Jan. 7, 2005

the conditions in §230.162(a)(2) of this section. Instruction to §230.162 of this section: Notwithstanding the provisions of §230.162 of this section above, for going-private transactions (as defined by §240.13e-3) and roll-up transactions (as described by Item 901 of Regulation S-K (

investigation conducted by any Agency official or department, including, but not limited to, the Office of Equal Employment Opportunity, involving matters that relate to or have an effect on the official business of the Agency. Such cooperation shall include, among other things, responding to requests for information, providing statements under oath relating to such audits or investigations, and affording access to Agency records and/or any other Agency materials in an employee's possession.

§ 100.502 Application. This regulation (§§ 100.501–100.570) applies to all programs or activities conducted by the agency, except for programs or activities conducted outside the United States that do not involve individuals with handicaps in the United

84] This provision in no way affects the compensability of activities performed within the workday proper or the computation of hours worked within such workday for purposes of the Fair Labor Standards Act;[85] the provision is applicable only to walking, riding, traveling or other “preliminary” or “postliminary” activities of the kind

agency's appeal to the Secretary. (d) The designated agency's written appeal to the Secretary must state why the Governor has not met the burden of showing that good cause for the redesignation exists or has not met the procedural requirements under §§ 370.11 and 370.13

42 FR 5956, Jan. 31, 1977] Editorial Note Editorial Note: For Federal Register citations affecting

§ 105.210 Facility personnel with security duties. Facility personnel responsible for security duties must maintain a TWIC, and must have knowledge, through training or equivalent job experience, in the following, as appropriate: (a) Knowledge of current security threats and patterns;

appropriate limits on an applicant's participation to ensure the efficient conduct of the proceedings. (e) A non-party participant shall comply with the requirements for parties in § 81.11 and § 81.12. (Authority:

examination and testing of the items listed in chapters 6, 7, and 10 of the International Safety Guide for Oil Tankers and Terminals, if applicable, prior to cargo transfer operations. (2) Mooring systems. The survey must include a visual examination of the emergency towline, the anchor releasing mechanism, and mooring lines prior to entering the port or place of destination, if weather permits, or prior to getting underway.

machines operating simultaneously in each cargo tank. (5) Volume of water used for water rinsing. (6) Trim conditions of the tank vessel. {"origins":[{"level":"part","identifier":"157","label_level":"Part 157","hierarchy":{"title":"33","chapter":"I","subchapter":"O","part":"157"},"current":false,"authority":["\u003ca href=\"https://www.govinfo.gov/link

: (1) The name of the manufacturer. (2) The name and model number of the device. (3) The month and year of completion of manufacture. (4) Serial number. (5) Whether the device is certified for use on an inspected or an uninspected vessel. (6) Whether the device is Type I, II, or III

letter other than “I” or a number other than “1” between the letter and number groupings (Example: DC 5678 EF or DC–5678–EF); and (5) Read from left to right. (b) When a vessel is used by a manufacturer or by a dealer for testing or demonstrating, the number may be painted on or attached to removable plates that are temporarily but firmly attached to each side of the forward half of the vessel.

are published annually in the US Coast Pilot. Table 169.140—Requirements for Ship Reports Open Table Telegraphy Function Information required

located near the center of the Bligh Reef precautionary area is established. Regulations for vessels operating in these areas are in § 165.1109(d) of this chapter. [USCG–2001–10254, 67 FR 53743, Aug. 19, 2002]

19 CFR 171.51. (b) When a commercial fishing industry vessel is subject to seizure for a violation of 21 U.S.C. 881(a)(4), (6), or (7); of 19 U.S.C. 1595a(a

(3) If the period is 7 days or less, we do not include Saturdays, Sundays, or Federal holidays. (b) If you were served a document (by domestic mail) that requires or permits a response, you may add 3 days to any period for response. (c) If you need additional time to file a response, follow the rules in these tables. (1) You may request an extension—