Search returned 323052 results for "free fc coins xbox one Visit Buyfc26coins.com for latest FC 26 coins news..yEY9"
The purposes of this chapter are to provide for all services and assistance necessary to enable veterans with service-connected disabilities to achieve maximum independence in daily living and, to the maximum extent feasible, to become employable and to obtain and maintain suitable employment. Amendments
42 U.S.C. 1437f(o)(8)(B)). (C) In any case in which a facility, with respect to which a person received a grant for construction, rehabilitation, or acquisition under section 2011 of this title, is converted as described in subparagraph (B)(ii), such conversion shall be considered to have been carried out pursuant to the needs of the Department
References in Text This Act, referred to in subsecs. (a)(1), (b), and (c)(2), is Pub. L. 101–73, Aug. 9, 1989, 103 Stat. 183, known as the Financial Institutions Reform, Recovery, and Enforcement Act of 1989. For complete classification of this Act to the Code, see Short Title of 1989 Amendment note set out under section
may not administer a licensing or certification program in a manner that subjects qualified individuals with handicaps to discrimination on the basis of handicap, nor may the agency establish requirements for the programs or activities of licensees or certified entities that subject qualified individuals with handicaps to discrimination on the basis of handicap. However, the programs or activities of entities that are licensed or certified by the agency are not, themselves, covered by this
not be presumed to constitute such consent. (2) Procedures. Except as otherwise provided in paragraph (b) of this section, after an appeal to the Board of Veterans' Appeals has been filed, a representative may not withdraw services as representative in the appeal unless good cause is shown on motion. Good cause for such purposes is the extended illness or incapacitation of an agent admitted to practice before the Department
may not administer a licensing or certification program in a manner that subjects qualified individuals with handicaps to discrimination on the basis of handicap, nor may the agency establish requirements for the programs or activities of licensees or certified entities that subject qualified individuals with handicaps to discrimination on the basis of handicap. However, the programs or activities of entities that are licensed or certified by the agency are not, themselves, covered by this
for the Amendment 80 sector is .  .  . and the amount of yellowfin sole ITAC allocated to Amendment 80 Sector is .  .  . and the amount of yellowfin sole ITAC allocated to the BSAI trawl limited access sector is .  .  .    
curatorial services for a collection subject to the regulations in this part must possess the capability to provide adequate long-term curatorial services, as set forth in §79.9 of this part, to safeguard and preserve the associated records and any material remains that are deposited in the repository. [55 FR 37630, Sept. 12, 1990; 55 FR 41639, Oct. 10, 1990]
appropriate agency procedures. At the request of the claimant, the agency may forward the claim to OPM on the claimant's behalf. The claimant is responsible for ensuring that OPM receives all the information requested in paragraph (c) of this section. (c) FLSA claim filed with OPM. An FLSA claim filed with OPM must be made in writing and must be signed by the claimant or the claimant's representative. Relevant information may be
may not administer a licensing or certification program in a manner that subjects qualified individuals with handicaps to discrimination on the basis of handicap, nor may the agency establish requirements for the programs or activities of licensees or certified entities that subject qualified individuals with handicaps to discrimination on the basis of handicap. However, the programs or activities of entities that are licensed or certified by the agency are not, themselves, covered by this
persons to discrimination on the basis of handicap, nor may the agency establish requirements for the programs or activites of licensees or certified entities that subject qualified handicapped persons to discrimination on the basis of handicap. However, the programs or activities of entities that are licensed or certified by the agency are not, themselves, covered by this part. (c) The exclusion of nonhandicapped persons from the benefits of a program limited by
persons to discrimination on the basis of handicap, nor may the agency establish requirements for the programs or activites of licensees or certified entities that subject qualified handicapped persons to discrimination on the basis of handicap. However, the programs or activities of entities that are licensed or certified by the agency are not, themselves, covered by this part. (c) The exclusion of nonhandicapped persons from the benefits of a program limited by
other institution or organization. (k) Special Government Employee means an officer or employee of the Corporation who is retained, designated, appointed or employed to perform, with or without compensation, for not more than 130 days during any period of 365 consecutive days, temporary duties either on a full time or intermittent basis (
Act (Pub. L. 92-513), as amended by the Energy Policy and Conservation Act (Pub. L. 94-163); Administrator means the Administrator of the National Highway Traffic Safety Administration; Affected model year means a model year for which an exemption and alternative average fuel economy standard are requested under this part;
, that respondent shall pay. (e) Transmittal. The Presiding Officer shall transmit to the Administrator for decision all offers of settlement and accompanying memoranda that meet the requirements enumerated in paragraph (d) of this section. The Presiding Officer may, but need not, recommend acceptance or rejection of such offers. Any party or participant may object to a proposed consent agreement by filing a motion and supporting
The type and thickness of material for DOT 406 specification cargo tanks must conform to §178.345-2, but in no case may the thickness be less than that determined by the minimum thickness requirements in §178.320(a). The following Tables I and II identify the
of the State or municipality: (1) Establishes a minimum cover of less than 24 inches (610 millimeters); (2) Requires that mains be installed in a common trench with other utility lines; and (3) Provides adequately for prevention of damage to the pipe by external forces. (e) Except as provided in paragraph (c) of this section, all pipe installed in a navigable
subpart in every respect both before and after being used in vehicle tests specified in Standard No 214 §571.214 of this chapter. (c) Disassembly, inspection, and assembly procedures; external dimensions and weight; and a dummy drawing list are set forth in the Side Impact Dummy (SID) User's Manual, dated May 1994 except for pages 7, 20 and 23, and appendix A (consisting
A (c) Adjacent segments are joined in a manner such that except for contacts existing under static conditions, there is no contact between metallic elements throughout the range of motion or under simulated crash-impact conditions. (d) The structural properties of the dummy are such that the dummy conforms to this part in every respect both before and after its
(a) The neck assembly consists of parts shown in drawing 180-2000. For purposes of this test, the neck assembly is mounted within the headform assembly (180-9000) as shown in Figure V1 in appendix A to this subpart. When subjected to the test procedure specified in paragraph (b) of this section, the neck-headform assembly shall meet the performance requirements specified in paragraph (c) of this section. (b)
used by private industry (i.e., a shipper, manufacturer, or carrier), it must be clearly and legibly marked with a unique company name (or logotype) and identification number. (e) Customs acceptance. Seals will be considered as acceptable for use and/or purchase by U.S. Customs as soon as the manufacturer attests that the seals have been tested and meet or exceed the standards provided in paragraphs (a) through (d) of this
(a) Name. The name of the viticultural area described in this section is “Cienega Valley.” (b) Approved maps. The appropriate maps for determining the boundaries of the Cienega Valley viticultural area are four U.S.G.S. maps. They are titled: (1) “Hollister Quadrangle, California,” 7.5 minute series (1971);
(a) Name. The name of the viticultural area described in this section is “Paicines.” (b) Approved maps. The appropriate maps for determining the boundaries of the Paicines viticultural area are the three U.S.G.S. maps. They are titled: (1) “Tres Pinos Quadrangle, California,” 7.5 minute series (1971);
(a) Name. The name of the viticultural area described in this section is “Bennett Valley”. (b) Approved maps. The appropriate maps for determining the boundary of the Bennett Valley viticultural area are four 1:24,000 scale USGS topographic maps. They are titled: (1) Santa Rosa Quadrangle, CA—Sonoma Co. 1994
(a) Name. The name of the viticultural area described in this section is “Squaw Valley-Miramonte.” For purposes of part 4 of this chapter, “Squaw Valley-Miramonte” is a term of viticultural significance. (b) Approved maps. The six United States Geological Survey (USGS) 1:24,000 scale topographic maps used to determine the boundary of the Squaw Valley
administer a licensing or certification program in a manner that subjects qualified individuals with handicaps to discrimination on the basis of handicap, nor may the agency establish requirements for the programs or activities of licensees or certified entities that subject qualified individuals with handicaps to discrimination on the basis of handicap. However, the programs or activities of entities that are licensed or certified by the agency are not, themselves, covered by this regulation.
§250.1932) (17) Reporting Unsafe Working Conditions (see §250.1933). (b) You must include a job safety analysis (JSA) for OCS activities identified or discussed in your SEMS program (see §250.1911).
Except as provided in §827.13 of this part, the construction, operation, maintenance, modification, reclamation, and removal activities at coal preparation plants shall comply with the following: (a) Signs and markers for the coal preparation plant, coal processing waste disposal area, and water-treatment facilities shall comply with