service lamps are below the benchmark unit sales estimate. DOE has prepared, and is making available on its website, a spreadsheet showing the comparisons of projected sales versus 2018 sales, as well as the model used to generate the original sales estimates. DATES: April 25, 2019. ADDRESSES: The spreadsheet is

—“73 °F ± 9 °F.” instead of “73 ± 9 °F” and “minute” changed to “min.” Minor spelling changes (e.g., “gage” to “gauge” in 7.4.2.1) Definition for acronyms added (e.g., “EPS (expanded polystyrene), EPP (expanded polypropylene)” in note 3). All of the non-substantive changes made in ASTM F2050-19 are editorial in nature and are neutral

. Launch window means a period of time during which the flight of a launch vehicle may be initiated. “Meets intent” certification means a decision by a Federal launch range to accept a substitute means of satisfying a safety requirement where the substitute provides an equivalent level of safety to that of the original requirement.

means introduction of a new process, process equipment, or regulated substance, an alteration of process chemistry that results in any change to safe operating limits, or other alteration that introduces a new hazard. Mechanical integrity means the process of ensuring that process equipment is fabricated from the proper materials of construction and is properly installed, maintained, and replaced to prevent failures and

ensure that its reading room and indices are reviewed and updated on an ongoing basis. (b) A link to USDA Electronic Reading Rooms can be found on the USDA public FOIA website. (c) In accordance with 5 U.S.C. 552(a)(2), each component within the Department shall make the following materials available for public inspection and copying

(a) All ATP Participants. (1) All ATP Participants shall submit to the CCC for approval a detailed fraud prevention program. The CCC will notify all new and existing ATP Participants in writing in each Participant's approval letter and through the FAS website as to applicable submission dates for and dates for approvals of fraud prevention programs. ATP Participants should review their fraud

unsolicited proposals is available in the handbook entitled, “Guidance for the Preparation and Submission of Unsolicited Proposals”, which is available on the NASA Acquisition Internet Service Website at: http://ec.msfc.nasa.gov/hq/library/unSol-Prop.html.

selection procedures include the following: (1) After DOE evaluates the bids received during the open window, it shall, within 45 days following the close of the open window for submission of bids for the reverse auction, announce on DOE's website and by direct mail the names of the successful bidders and the terms of their bids. (2) DOE shall issue awards for the bid production amounts beginning with the bidder that submitted the bid

Internet website of the Agency. Amendments 2019—Subsec. (b). Pub. L. 115–428 amended subsec. (b) generally. Prior to amendment, subsec. (b) related to required contents of report, including number of grants provided and information on distribution of assistance.

Narrowband PCS service areas are nationwide, regional, and Major Trading Areas (MTAs), as defined in this section. MTAs are based on the Rand McNally 1992 Commercial Atlas & Marketing Guide, 123rd Edition, at pages 38-39 (MTA Map). Rand McNally organizes the 50 States and the District of Columbia into 47 MTAs. The MTA Map is available on the FCC's website at www.fcc.gov/auctions through the “Maps” submenu.

published copies on its official website. (c) Subject to the prior written approval of the Director of the Office of Government Ethics, an agency may require employees to file additional confidential financial disclosure forms which supplement the standard form referred to in paragraph (a)(3) of this section, if necessary because of special or unique agency circumstances. The Director may approve such agency forms when, in his opinion, the supplementation is shown to be

(2) General wage determinations are published on the WDOL website. General wage determinations are effective on the publication date of the wage determination or upon receipt of the wage determination by the contracting agency, whichever occurs first. “Publication” within the meaning of this section shall occur on the first date the wage determination is published on the WDOL. Archived Construction Wage Rate Requirements statute general wage determinations that are

(a) General wage determinations. If there is a general wage determination on the WDOL website applicable to the project, the agency may use it without notifying the Department of Labor. When necessary, a request for a general wage determination may be made by submitting Standard Form (SF) 308, Request for Determination and Response to Request, to the Administrator, Wage and Hour Division, Attention: Branch of Construction

— (i) Publish a notice on the Federal Business Opportunities website (www.FedBizOpps.gov) of the intent to make the nonavailability determination; and (ii) Solicit information relevant to such notice from interested parties, including producers of mill products from covered materials. (2) The USD(A&S)— (i) Will take