crossing warning systems if such monitoring system is equipped to indicate power status. Pre-existing Modified Supplementary Safety Measure (Pre-existing Modified SSM) means a safety system or procedure that is listed in appendix A to this Part, but is not fully compliant with the standards set forth therein, which was installed before December 18, 2003 by the appropriate traffic control or law enforcement authority responsible

requested from the designated OA would be within the time frames established in the OA's approved fee schedule. ii. Nonuse of Service a. The requesting facility would submit a written request for a “nonuse of service” exception. b. The requesting facility would demonstrate it has not had official sample-lot inspection or weighing services

d. In paragraph (c) introductory text, remove the phrase “calendar year 2013” and add the phrase “the prior calendar year” in its place; and e. Add paragraphs (c)(3) and (4). The additions read as follows:

Subcommittees. Alternate expenditure levels were discussed by these groups, based upon the relative value of various projects to the olive industry and the increased olive production. The assessment rate of $15.00 per ton of assessable olives was derived by considering anticipated expenses, the high volume of assessable olives, and additional pertinent factors. NASS data indicate the average producer price for the 2019 crop year was $766.00 per ton. Therefore

powered wheelchairs We also recommend you consider FDA's guidance entitled “Hospital Bed System Dimensional and Assessment Guidance to Reduce Entrapment” when considering the appropriate risk assessment referenced in the conditions set forth above. Firms are now exempt from 510(k) requirements for powered wheeled stretchers as long as they meet these conditions, subject to the limitations on exemption in 21

for lesions suspicious of cancer. (a) Identification. A radiological computer-assisted diagnostic software for lesions suspicious of cancer is an image processing prescription device intended to aid in the characterization of lesions as suspicious for cancer identified on acquired medical images such as magnetic resonance, mammography, radiography, or computed tomography. The device characterizes lesions based on features or information

in paragraphs (f)(1)(i) and (f)(1)(ii) of this section have been met. When the TIB entry is converted, the bond will be cancelled and the entry closed. Once the conversion is complete, the Center director will provide a courtesy acknowledgment to this effect to the importer in writing or electronically. [CBP Dec. 04-36, 69 FR 63449, Nov. 2, 2004, as amended by CBP Dec. 16-26, 81 FR 93014, Dec. 20, 2016]

paragraph (c)(2)(i) of this section; or (B) At the option of a person who makes a valid claim regarding previous treatment, on and after the date of publication of the final modifying or revoking notice in the Customs Bulletin under paragraph (b)(2) or paragraph (c)(2)(i) of this section. [T.D. 02-49, 67 FR 53497, Aug. 16, 2002; 67 FR 54733, Aug. 26, 2002]

′ W. 26 40°14.36′ N. 70°51.05′ W. 27 40°6.33

″ 48°26′47″ 125°09′12″

underwater breathing device that pumps air from the surface through one or more hoses to divers at depth. Incidental catch or incidental species means species caught while fishing for the primary purpose of catching a different species. Land or landing means offloading fish from a fishing vessel, arriving in port to begin offloading fish, or causing fish to be

August 31, 1990 December 7, 1990 VA Code §45.1-270.4:1. September 12, 1990 December 26, 1990 VR 480-03-19: 784.20; 817.121. June 29, 1990 January

Primary copper smelters, Municipal incinerators capable of charging more than 250 tons of refuse per day, Hydrofluoric, sulfuric, and nitric acid plants, Petroleum refineries, Lime plants, Phosphate rock processing plants, Coke oven batteries, Sulfur recovery plants

necessary. (ii) The system shall be pressurized to 14 ±0.5 inches of water without exceeding 26 inches of water system pressure. (iii) Close off the pressure source, seal the evaporative system and monitor pressure decay for up to two minutes. (iv) Loosen the gas cap after a maximum of two minutes and monitor for a sudden pressure drop, indicating that the fuel tank was pressurized.

except paragraph (a)(1) are hereby incorporated and made a part of the Utah State implementation plan and are applicable to proposed major stationary sources or major modifications to be located on Indian Reservations. (c) The State of Utah has clarified the generalized language contained in the Utah Air Conservation Regulations on the use of the “Guidelines on Air Quality Models.” In a letter to Douglas M. Skie, EPA, dated May 26, 1989, F. Burnell Cordner, Director

) Letters from the Vermont agency of Natural Resources dated April 6, 1992 and August 28, 1992 submitting negative declarations for several pre-1990 CTG categories. (E) Nonregulatory portions of the submittal. (26) Revisions to the State Implementation Plan submitted by the Vermont Air Pollution Control Division on July 28, 1998. (i) Additional materials.

) Individual subparts of this part may include specific provisions which clarify or make inapplicable the provisions set forth in this section. [36 FR 24877, Dec. 28, 1971, as amended at 40 FR 46254, Oct. 6, 1975; 40 FR 58418, Dec. 16, 1975; 45 FR 5617, Jan. 23, 1980; 48 FR 48335, Oct. 18, 1983; 50 FR 53113, Dec. 27, 1985; 52 FR 9781, Mar. 26, 1987; 55 FR 51382, Dec. 13, 1990; 59 FR 12428, Mar. 16, 1994; 59 FR 47265, Sep. 15, 1994; 64 FR 7463, Feb. 12, 1999

ASTM D388 (incorporated by reference, see §60.17). Natural gas means a fluid mixture of hydrocarbons (e.g., methane, ethane, or propane), composed of at least 70 percent methane by volume or that has a gross calorific value between 35 and 41 megajoules (MJ) per dry standard cubic meter (950 and 1,100 Btu per dry standard cubic

85 FR 17261, Mar. 26, 2020]

Solid fuel means any fuel that has a definite shape and volume, has no tendency to flow or disperse under moderate stress, and is not liquid or gaseous at ISO conditions. This includes, but is not limited to, coal, biomass, and pulverized solid fuels. Standard ambient temperature and pressure (SATP) conditions means 298.15 Kelvin (25 °C, 77 °F) and 100.0 kilopascals

definition of “in VOC service,” “in VHAP service,” “in organic hazardous air pollutant service,” or “in” other chemicals or groups of chemicals “service” as defined in the referencing subpart. In-situ sampling systems means nonextractive samplers or in-line samplers. In vacuum service means that equipment is operating at an internal pressure which is at least 5

per day and actual annual average benzene emissions equal to or greater than 0.90 Mg/yr, determined according to §63.1282(a). A glycol dehydration unit complying with the 0.9 Mg/yr control option under 63.1275(b)(1)(ii) is considered to be a large dehydrator. Major source, as used in this subpart, shall have the same meaning as

compound means the coating applied onto ends of cans that functions to seal the end(s) of a can to the can body. Exempt compound means a specific compound that is not considered a VOC due to negligible photochemical reactivity. The exempt compounds are listed in 40 CFR 51.100(s). Food can means any can manufactured to contain edible products and

assigned personnel. Magnet wire coatings, commonly referred to as magnet wire enamels, are applied to a continuous strand of wire which will be used to make turns (windings) in electrical devices such as coils, transformers, or motors. Magnet wire coatings provide high dielectric strength and turn-to-turn conductor insulation. This allows the turns of an electrical device to be placed in close proximity to one another which leads

Non-HAP solvent means, for the purposes of this subpart, a solvent (including thinners and cleaning solvents) that contains less than 0.1 percent by mass of any individual HAP that is an OSHA-defined carcinogen as specified in 29 CFR 1910.1200(d)(4) and less than 1.0 percent by mass for any other individual HAP. Paint stripping and/or miscellaneous surface coating source or facility

63838, Sept. 26, 1980; 46 FR 44433, Sept. 4, 1981; 47 FR 11826, Mar. 19, 1982; 49 FR 10096, Mar. 19, 1984; 54 FR 24894, June 12, 1989; 58 FR 2896, Jan. 6, 1993; 59 FR 47079, Sept. 14, 1994; 63 FR 14035, Mar. 24, 1998; 63 FR 14818, Mar. 27, 1998]