term applicant means one who submits an application, request or plan required to be approved by the Administrator, or by a primary recipient as a condition to eligibility for Federal financial assistance, and the term “application” means such application, request, or plan. (d) The term facility includes all or any portion of structures, equipment, or other real or personal property or

(c) of this section shall be used. (b) Permitted individual antibiotics: (1) The antibiotic level of a specified individual antibiotic in one ml. of a biological product, when prepared as recommended for use, shall not exceed the amounts listed in this paragraph: Provided, That in the case a desiccated biological product is to be used with an indefinite quantity of water or other

individual consultants" for "four individual consultants" in first sentence and "not more than two individual consultants" for "one consultant" in second sentence. Pub. L. 107–20 inserted "The President pro tempore emeritus of the Senate is authorized to appoint and fix the compensation of one individual consultant, on a temporary or intermittent basis, at a daily rate of compensation not in excess of that specified in the first sentence of this subsection." after second sentence

For provisions relating to the extension of time for payment of taxes by corporations expecting carrybacks, see §§1.6164-1 to 1.6164-9, inclusive, of this chapter (Income Tax Regulations).

additional relief for small cable operators is necessary at this time. More specifically, ACA Connects proposes that the Commission establish a universal per channel minimum leased access rate that is presumptively reasonable or modify the rate formula to make sure that the least profitable cable operators are not forced to offer leased access at extremely low rates or even for free, thus diverting capacity that would be better used for broadband. Despite these arguments, the record does not contain any

the other the “overtime” portion. Under such a plan, an employee who would ordinarily command an hourly rate of pay well in excess of the minimum for his work is assigned a low hourly rate (often the minimum) for the first hour (or the first 2 or 4 hours) of each day. This rate is designated as the regular rate: “time and one-half” based on such rate is paid for each additional hour worked during the workday. Thus, for example, an employee is arbitrarily assigned an hourly rate of $5 per hour

sampling period. A continuous flow recorder is recommended but not required. The flow measurement device shall be accurate to ±2 percent. 7.1.5 A timing/control device capable of starting and stopping the sampler shall be used to obtain a sample collection period of 24 ±1 hr (1,440 ±60 min). An elapsed time meter, accurate to within ±15 minutes, shall be used to measure sampling time. This meter is optional for samplers with continuous flow recorders if the sampling

subsidiaries, unless otherwise specifically excluded from disclosure in this Item. All such compensation shall be reported pursuant to this Item, even if also called for by another requirement, including transactions between the registrant and a third party where a purpose of the transaction is to furnish compensation to any such named executive officer or director. No amount reported as compensation for one fiscal year need be reported in the same manner as compensation for a subsequent fiscal year

1951—Subsec. (a). Act June 19, 1951, substituted "Universal Military Training and Service Act" for "Selective Service Act of 1948". Short Title of 1969 Amendment Pub. L. 91–124, §1, Nov. 26, 1969, 83

secretary of the committee. The committee shall prescribe, with the approval of the President or their designee, regulations for carrying out this chapter. The regulations shall provide for, among other things, the following: (1) The documents which shall be authorized under section 1505(b) to be published in the Federal Register. (2) The

(a) The Secretary may at any time terminate the provisions of this part by giving at least one day's notice by means of a press release or in any other manner in which he may determine. (b) The Secretary shall terminate or suspend the operation of any and all of the provisions of this part whenever he finds that such provisions do not tend to effectuate the declared policy of the act. (c) The Secretary

action. In the absence of a finding of discrimination on the basis of race, color, national origin, sex, handicap, or age in any program or activity, a recipient may continue to encourage participation by all persons regardless of race, color, national origin, sex, handicap, or age. (c) Self-evaluation. Each recipient shall, within one year of the effective date of this part: (1) Whenever

(a) Eligibility.—Except as provided in this chapter, eligibility for membership in the corporation and the rights and privileges of members are as provided in the constitution and bylaws of the corporation. (b) Voting.—Each member has one vote in the conduct of official business at the post level. (c)

§ 778.104 Each workweek stands alone. The Act takes a single workweek as its standard and does not permit averaging of hours over 2 or more weeks. Thus, if an employee works 30 hours one week and 50 hours the next, he must receive overtime compensation for the overtime hours worked beyond the applicable maximum in the second week, even though the

made. (2) The accounting will record (i) the date, nature, and purpose of each disclosure of a record to any person or to another agency and (ii) the name and address of the person or agency to whom the disclosure was made. (3) Accountings prepared under this section will be maintained for at least five years or the life of the record, whichever is longer, after the disclosure for which the accounting is made.

§301.6227-3(c). (4) Indirect partner. The term indirect partner means any person who has an interest in a partnership through their interest in one or more pass-through partners (as defined in paragraph (a)(5) of this section) or through a wholly-owned entity disregarded as separate from its owner for Federal income tax purposes.

tube) loosely packaged must have a clearance between the fibers and the inside of the container sufficient to allow for thermal expansions without constraining the fibers. The protective container must be manufactured from a material having a coefficient of friction sufficiently low to allow the fibers free movement. The design may contain more than one tube. Loose buffer tubes must meet the requirements of Paragraph 3.2.1, Loose Buffer Tube Dimensions, of

Part 764 of this chapter, State Processes for Designating Areas Unsuitable for Surface Coal Mining Operations, pertaining to petitioning, initial processing, hearing requirements, decisions, data base and inventory systems, public information, and rith the February 26, 1980, May 16, 1980, and August 15, 1980, opinions and orders of the U.S. District Court for the District of Columbia (In re

obtained for each issuance or sale of one or more of these instruments to any individual purchaser which involves currency in amounts of $3,000-$10,000 inclusive: (1) If the purchaser has a deposit account with the financial institution: (i) (A) The name of the purchaser; (B) The date of purchase; (C) The type(s

less, must be submitted simultaneously to the address set forth in paragraph (b) of this section. This fee will be refunded (or applied to any resulting partial fee) if the waiver is granted. Payment of fees for the registration activities, in contrast to the waiver fee, shall not be required until the Agency makes a determination on the waiver request. Since the actual fee is submitted to an address different than the one to which the waiver request is submitted, a copy of the payment document

(a) Any person who engages in the United States in the business of manufacturing or exporting or temporarily importing defense articles, or furnishing defense services, is required to register with the Directorate of Defense Trade Controls under §122.2. For the purpose of this subchapter, engaging in such a business requires only one occasion of manufacturing or