other programs established pursuant to this subchapter shall be carried out in a manner which does not result in an adverse effect on the furnishing of timber, free of charge, under any other provision of law. (5) Wood residues shall be collected from a site so as to avoid soil depletion or erosion giving full consideration to the protection of wildlife habitat. (6) For the purposes of

In the case of a public water system which serves a population of not more than 3,300 persons and which needs financial assistance for the necessary improvements, an exemption granted under §142.50(b) (1) or (2) may be renewed for one or more additional 2-year periods, but not to exceed a total of 6 additional years, if the public water system establishes that the

A person, as defined in §30.4 of this chapter, may file an application for a specific license authorizing the use of sealed sources in an irradiator on Form NRC 313, “Application for Material License.” Each application for a license, other than a license exempted from part 170 of this chapter, must be accompanied by the fee prescribed in

denied by agencies for processing under this section. In responding to mandatory declassification review requests, agencies shall make a final determination within one year from the date of receipt. When information cannot be declassified in its entirety, agencies shall make reasonable efforts to release, consistent with other applicable laws, those declassified portions of the requested information that constitute a coherent segment. Upon denial, in whole or in part, of an initial request, the

provision, are defined in the clause of this solicitation entitled Project Labor Agreement. (b) Consistent with applicable law, the offeror shall negotiate a project labor agreement with one or more labor organizations for the term of the resulting construction contract. (c) Consistent with applicable law, the project labor agreement reached pursuant to this provision shall— (1) Bind the offeror and all subcontractors engaged in construction on the construction project to comply

The tolerance established in this part for the dimension specified as “distance between heads” shall be applied as follows on the various types of barrels in use: (a) When a barrel or subdivision thereof has two heads, the tolerance shall be applied to the distance between the inside surfaces of the heads and perpendicular to them. (b) When a barrel or subdivision thereof has but one head and a croze

policy, information about CBI or multimedia submissions, and general guidance on making effective comments, please visit https://www.epa.gov/​dockets/​commenting-epa-dockets. FOR FURTHER INFORMATION CONTACT: Jeff Hunt, EPA Region 10, 1200 Sixth Avenue—Suite 155, Seattle, WA 98101, at (206) 553-0256, or hunt.jeff@epa.gov.

500 or greater D 1A manufacturer may optionally use either the sampling plan for code letter “AA” or sampling plan for code letter “A” for Selective Enforcement Audits of engine families with annual sales between 20 and 50 engines. Additionally, the manufacturer may switch between these plans during the audit.

500 or greater D 1A manufacturer may optionally use either the sampling plan for code letter “AA” or sampling plan for code letter “A” for Selective Enforcement Audits of engine families with annual sales between 20 and 50 engines. Additional, the manufacturers may switch between these plans during the audit.

, 26 Stat. 141. R.S. §2842 required bond for the production of an invoice duly certified by the oath of the owner or one of them, in the case of merchandise belonging to a resident of the United States absent from the place of entry.

the months of December through July is not less than 35 percent; (2) Shipments for qualification purposes shall include both transfers from supply plants to plants described in paragraph (c)(1) of this section, and deliveries made direct from the farm to plants qualified under paragraph (a) of this section. (f) A system of supply plants may qualify for pooling if 2 or more plants operated by one or more handlers meet the applicable

(i) Reasonably expects to be liable for not more than $50,000 in taxes described in 26 U.S.C. 5061(d)(4) during the current calendar year; (ii) Was liable for not more than $50,000 in such taxes in the preceding calendar year; and (iii) Pays such taxes on a deferred basis using a semimonthly

(a) General. Tolerances are established for residues of the herbicide fenoxaprop-ethyl, including its metabolites and degradates, in or on the commodities in the table in this paragraph. Compliance with the tolerance levels specified in this paragraph is to be determined by measuring only the sum of fenoxaprop-ethyl, (±)-ethyl 2-[4-[(6-chloro-2-benzoxazolyl)oxy]phenoxy]propanoate, and its metabolites, 2-[4-[(6-chloro-2

A credit union may substitute one or more alternative components below, in place of the corresponding standard components in §702.106 above, when any alternative component amount, expressed as a percentage of the credit union's quarter-end total assets as reflected in its most recent Call Report, rounded to two decimal places, is smaller (Table 5):

Open Table Time delay for public dissemination 15 minutes. Table C2. Large Notional Off-Facility Swaps Subject to the Mandatory Clearing Requirement With at Least One Swap Dealer or Major Swap Participant Counterparty

§ 120.801 of this chapter; (2) Be part of a 504 financing that is comprised of only one Third Party Loan and one CDC 504 loan; the CDC 504 loan must be funded by a Debenture that was been sold on or after February 17, 2009; (3) Be Current and have been Current for the six-month-period immediately prior to the date the Pool is formed or for the life of the Pool Loan, whichever time period is shorter;

(a) Application requirements. Any person who wishes to establish an experimental plant for the purposes specified in §19.32 must submit a written application to the appropriate TTB officer and obtain approval of the proposed experimental plant. The application must: (1) State the nature, extent, and

Comments further may be sent via the Federal eRulemaking Portal. Visit the Federal eRulemaking Portal website (http://www.regulations.gov) for additional instructions on providing comments via the Federal eRulemaking Portal. Although comments may be submitted by postal mail, the USPTO prefers to receive comments by email. Emailed comments are preferred to be

only the quantity expressed in the returns and plats respectively, and all others as containing the complete legal quantity. Sixth. All lines shall be plainly marked upon trees, and measured with chains, containing two perches of sixteen and one-half feet each, subdivided into twenty-five equal links; and the chain shall be adjusted to a standard to be kept for that purpose. Seventh. Every surveyor shall note in his field book the