For the purpose of this subpart: (a) Except as provided below, the general definitions, abbreviations and methods of analysis set forth in part 401 of this chapter shall apply to this subpart. (b) The term seafood shall mean the raw material, including freshwater and saltwater fish and shellfish, to be processed, in the form in which it is received at the

For the purpose of this subpart: (a) Except as provided below, the general definitions, abbreviations and methods of analysis set forth in part 401 of this chapter shall apply to this subpart. (b) The term seafood shall mean the raw material, including freshwater and saltwater fish and shellfish, to be processed, in the form in which it is received at the

Except as provided in 40 CFR 125.30 through 125.32, any existing point source subject to this subpart must achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best conventional pollutant control technology (BCT): The effluent limitations are those for BOD5. TSS, Oil and Grease, and pH contained in

Except as provided in 40 CFR 125.30 through 125.32, any existing point source subject to this subpart must achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best conventional pollutant control technology (BCT): The effluent limitations are those for BOD5, TSS, Oil and Grease, and pH contained in

Except as provided in 40 CFR 125.30 through 125.32, any existing point source subject to this subpart must achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best conventional pollutant control technology (BCT): The effluent limitations are those for BOD5, TSS, Oil and Grease, and pH contained in

Except as provided in 40 CFR 125.30 through 125.32, any existing point source subject to this subpart must achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best conventional pollutant control technology (BCT): The effluent limitations are those for BOD5, TSS, Oil and Grease, and pH contained in

Except as provided in 40 CFR 125.30 through 125.32, any existing point source subject to this subpart must achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best conventional pollutant control technology (BCT): The effluent limitations are those for BOD5, TSS, Oil and Grease, and pH contained in

Except as provided in 40 CFR 125.30 through 125.32, any existing point source subject to this subpart must achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best conventional pollutant control technology (BCT): The effluent limitations are those for BOD5, TSS, Oil and Grease, and pH contained in

Except as provided in 40 CFR 125.30 through 125.32, any existing point source subject to this subpart must achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best conventional pollutant control technology (BCT): The effluent limitations are those for BOD5, TSS, Oil and Grease and pH contained in

Except as provided in 40 CFR 125.30 through 125.32, any existing point source subject to this subpart must achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best conventional pollutant control technology (BCT): The effluent limitations are those for BOD5, TSS, Oil and Grease, and pH contained in

For the purpose of this subpart: (a) Except as provided below, the general definitions, abbreviations and methods of analysis set forth in part 401 of this chapter shall apply to this subpart. (b) The term “chromium” shall mean total chromium. (c) The term “raw material” shall mean all latex solids used in the manufacture of latex-dipped, latex-extruded, and latex

For the purpose of this subpart: (a) Finished product means the final product, such as fresh meat cuts, hams, bacon or other smoked meats, sausage, luncheon meats, stew, canned meats or related products. (b) Small processor means an operation that produces no more than 6000 lbs (2730 kg) per day of any type or combination of

Except as provided in 40 CFR 125.30 through 125.32 or §437.10(b), any existing point source subject to this subpart must achieve the following effluent limitations representing the application of BCT: Limitations for oil and grease, pH, and TSS are the same as the corresponding limitation specified in

Except as provided in 40 CFR 125.30 through 125.32 or §437.20(b), any existing point source subject to this subpart must achieve the following effluent limitations attainable by the application of BCT: Limitations for O&G, pH, and TSS are the same as the corresponding limitation specified in

For the purpose of this subpart: (a) Except as provided below, the general definitions, abbreviations and methods of analysis set forth in part 401 of this chapter shall apply to this subpart. (b) The term “product” shall mean carbon black manufactured by the furnace process. (c) The term “process waste water” shall mean waters which result from baghouse operations or

For the purpose of this subpart: (a) Except as provided below, the general definitions, abbreviations and methods of analysis set forth in part 401 of this chapter shall apply to this subpart. (b) The term “product” shall mean carbon black manufactured by the thermal process. (c) The term “process waste water” shall mean waters which result from baghouse operations or

The certification alternative to monitoring for TTO specified in §469.13 (a), (b), (c) and (d), is applicable to this subpart. (Approved by the Office of Management and Budget under control number 2040-0074) [48 FR 55704, Dec. 14, 1983, as amended at 49 FR 34823, Sept. 4, 1984

All agencies of the Federal Government shall review their present statutory authority, administrative regulations, and current policies and procedures for the purpose of determining whether there are any deficiencies or inconsistencies therein which prohibit full compliance with the purposes and provisions of this chapter and shall propose to the President not later than July 1, 1971, such measures as may be necessary to bring their authority and policies into conformity

(a) The President shall review periodically the progress of the Secretary of Agriculture and the Secretary of Energy in carrying out the purposes of this subchapter. (b) If the President determines it necessary in order to achieve such purposes the President may, in accordance with the provisions of chapter 9 of title 5, provide for a reorganization, including any required realignment of the respective programs of

The Secretary of Housing and Urban Development shall conduct a study to determine the extent to which Federal housing programs serve elderly families, disabled families, and families with children, in relation to the need of such families who are eligible for assistance under such programs. The Secretary shall submit a report to the Congress describing the study and the findings of the study not later than the expiration of the 1-year period beginning on October 28, 1992

Written comments on a sourcing area application or on a formal review of a sourcing area shall include the docket number and may be submitted to the Judge for 30 calendar days following publication of the notice. Persons submitting comments shall send a copy of the comments to the Regional Forester of the region in which the manufacturing facility being sourced is located. All comments must be received by the Judge and by the Regional Forester by the 30th day of the comment period.

An employee will not be granted a hearing and will have his or her disposable pay offset as specified in USDA's offset schedule if the employee: (a) Fails to file a petition for a hearing as prescribed in §3.75; or (b) Is scheduled to appear and fails to appear at the hearing.

(a) When the Secretary finds that any noncompliance with this part has occurred, he may initiate action to refuse to authorize payment of funds for the Cooperative Extension Service, or take other appropriate action provided by law. (b) The remedies available to the Secretary under this part, and remedies made available to any person under a program adopted pursuant to this part do not exclude any others which may be available under

For the purpose of this subpart values shall be expressed in terms of cents and hundredths of a cent. A fraction of a hundredth, when equal to, or greater than, the half thereof, shall be treated as a hundredth, and when less than a half of a hundredth shall be disregarded. [22 FR 10923, Dec. 28, 1957; 30 FR 7239, May 29, 1965. Redesignated at 53 FR 29328, Aug. 4, 1988]

An element of quality which describes the consistency of a lot of tobacco as it is prepared for market. Uniformity is expressed in grade specifications as a percentage. The percentage is applicable to group, quality, and color. (See Rule 14, §29.3615.) [30 FR 9207, July 23, 1965. Redesignated at 49 FR 16759, Apr. 20, 1984

Discoloration means russeting of light shade of golden brown caused by rust mite or other means. Lighter shades of discoloration caused by smooth or fairly smooth, superficial scars or other means may be allowed on a greater area, or darker shades may be allowed on a lesser area, provided no discoloration caused by melanose or other means may affect the appearance of the fruit to a greater extent than the shade and amount of discoloration allowed for

Fairly well colored means that the surface of the fruit may have green color which does not exceed the aggregate area of a circle 1- 1⁄4 inches (31.8 mm) in diameter and that the remainder of the surface has a yellow or better ground color with some portion of the surface showing reddish tangerine blush, or characteristic color for the variety

(a) Results of the plant survey shall be reported in writing to a designated plant official. (b) When the plant meets the requirements for the survey, inspection services may be inaugurated at a time mutually satisfactory to the plant management and USDA. (c) When the plant fails the requirements of the survey, contract services shall be withheld until corrective action is completed to the satisfaction

(a) Only instant nonfat dry milk manufactured and packaged in accordance with the requirements of this part and with the applicable requirements in subpart A of this part which has been officially inspected in process and found to be in compliance with these requirements may be identified with the official USDA U.S. Extra Grade, processed and packed inspection shield. (b) Instant nonfat dry milk shall meet the applicable standard for

A separate starter room or properly designed starter tanks and satisfactory air movement techniques shall be provided for the propagation and handling of starter cultures. All necessary precaution shall be taken to prevent contamination of the facility, equipment and the air therein. A filtered air supply with a minimum average efficiency of 90 percent when tested in accordance with the ASHRAE Synthetic Dust Arrestance Test should be provided so as to obtain outward movement of air from the