(a) General. The purpose of the SFHGLP is to provide low- and moderate-income persons who will live in rural areas with an opportunity to own decent, safe and sanitary dwellings and related facilities. The SFHGLP offers applicants without sufficient resources to provide the necessary housing on their own account, and unable to secure the credit necessary for such housing from other sources upon terms and conditions, which the

(a) Housing quality and site and neighborhood standards. The property must meet the site and neighborhood requirements established by the state or locality, and those standards contained under 7 CFR part 1924, subparts A and C or any successor regulations. (b) Third party assessments. As part of the application for a guaranteed loan, the lender must provide

(a) In evaluating the proposal, the RDA or its successor agency staff review panel and the awarding official will take into account the degree to which the proposal demonstrates the following: (1) Focus on a practical solution to a significant problem involving one or more of the following on a cooperative business basis: the preparation for market, processing, packaging, handling, storing, transporting, distributing, or marketing of

(a) Direct Federal and Federal-aid highway construction projects. It is the policy of the FHWA to require that all direct Federal and Federal-aid highway construction contracts include the same specific equal employment opportunity requirements. It is also the policy to require that all direct Federal and Federal-aid highway construction subcontracts of $10,000 or more (not including contracts for supplying materials) include

substantial expense in preparing proposals? (d) Have you identified and analyzed other contributing factors, including: (1) The extent to which you have defined the project requirements? (2) The time constraints for delivery of the project? (3) The capability and experience of potential contractors? (4) Your capability to manage the

incorporate “A Unified National Program for Floodplain Management” of the Water Resources Council into FHWA procedures.

(a) No State shall impose a width limitation of more or less than 102 inches, or its approximate metric equivalent, 2.6 meters (102.36 inches) on a vehicle operating on the National Network, except for the State of Hawaii, which is allowed to keep the State's 108-inch width maximum by virtue of section 416(a) of the STAA. (b) The provisions of paragraph (a) of this section do not apply to special mobile equipment as defined in

develop a programmatic approach for compliance with the requirements of any law, regulation, or executive order applicable to the project development process.

: (1) Project agreement number; (2) Subrecipient; (3) Amount of Federal funds; and (4) Eligible use of funds. (c) Amendments and changes to the HSP are subject to approval by the Regional Administrator before approval of vouchers for payment. Regional Administrators will disapprove changes and projects that are inconsistent with the

The value of fabricated components to be subtracted from the full value of the assembled article is the cost of the components when last purchased, f.o.b. United States port of exportation or point of border crossing as set out in the invoice and entry papers, or, if no purchase was made, the value of the components at the time of their shipment for exportation, f.o.b. United States port of exportation or point of border crossing, as set out in the invoice and entry

(a) If it shall appear to the satisfaction of the Center director holding the bond referred to in §10.80, that the entire quantity of salt covered by the bond has been duly accounted for, either by having been used in curing fish or by the payment of duty, the Center director may cancel the charges against the bond. The Center director may require additional evidence in

by the Center director shall be subject to such verification as he deems necessary. (b) Waiver of evidence of direct shipment. The Center director may waive the submission of evidence of direct shipment when he is otherwise satisfied, taking into consideration the kind and value of the merchandise, that the merchandise clearly qualifies for treatment under the Generalized System of Preferences.

Except in the case of any article described in §10.191(b)(2)(i) through (vi), the duty-free treatment provided for under the CBI will apply to an article that is the growth, product, or manufacture of the Commonwealth of Puerto Rico and that is by any means advanced in value or improved in condition in a beneficiary country, provided that:

(a) Honeybees from any country may be imported into the U.S. by the Department of Agriculture for experimental or scientific purposes. All other importations of honeybees are prohibited except those from a country which the Secretary of Agriculture has determined to be free of diseases dangerous to honeybees. (b) Honeybee semen may be imported into the U.S. only from countries determined by the Secretary of Agriculture to be free of

seizure. Notice of Customs seizure shall be sent or given to the importer or consignee, which shall inform him of his right to file a petition under section 618, Tariff Act of 1930, as amended (19 U.S.C. 1618), for remission of the forfeiture and permission to export the seized switchblade knives. (See part 171 of this chapter.) [T.D. 71-243, 36 FR

consignee until the certificate, documentation, or evidence, or the electronic equivalent, is presented to such officer. The certificate, documentation, or evidence, or the electronic equivalent, must be presented within 90 days after the date on which the material is taken into Customs custody, or such longer period as may be allowed by the port director for good cause shown. [T.D. 86-52, 51 FR 6907, Feb. 27, 1986, as amended by CBP Dec. 15-14, 80 FR 61285

for evading payment of any duty, tax, or other debt or obligation owing to the U.S. Government.

Except for bonds containing an agreement to pay court costs (condemned goods) (see §113.72), and except as may otherwise be deemed appropriate by CBP, bonds that are approved by the port director will be retained at the port office and bonds that are approved by the Revenue Division (including bonds relating to repayment of

Air cargo manifest. Customs Form 7509 may be changed to allow for additional information used by the airline.

shall be given to the person in charge of the conveyance for delivery to the Customs officers who will supervise transshipment.

own bonded warehouse, he shall check the goods against the accompanying delivery ticket, Customs Form 6043, or copy of the permit, Customs Form 7501, or its electronic equivalent, at the time he picks up the cargo. Receipt of merchandise by a bonded warehouse proprietor for the purpose of transportation to his own warehouse constitutes receipt into a bonded warehouse. [T.D. 94-81, 59 FR 51496, Oct. 12, 1994, as amended by CBP Dec. 15-14, 80 FR 61287

centralized examination station operator on Customs Form 301, containing the bond conditions set forth in §113.63 of this chapter, upon the payment of such lesser amount, or without the payment of any amount, as the Fines, Penalties, and Forfeitures Officer may deem appropriate under the circumstances. Application for cancellation of liquidated damages incurred shall be made in accordance with the provisions

(a) Effective date. Recordation of trademark and protection thereunder shall be effective on the date an application for recordation is approved, as shown on the recordation notice issued by the U.S. Customs and Border Protection instructing U.S. Customs and Border Protection Officers as to the terms and conditions of import protection appropriate. (b) Term.

(a) Assignment of Customs officers. Customs officers will be assigned or detailed to a zone as necessary to maintain appropriate Customs supervision of merchandise and records pertaining thereto in the zone, and to protect the revenue. (b) Supervision. Customs supervision over any zone or transaction provided for in this part will be in accordance with

. 1503). (b) Suspension of liquidation. The liquidation of entries shall not be suspended merely because the merchandise covered thereby is not legally marked, but, upon special application by the importer, the liquidation may be deferred for a reasonable time to permit the marking, destruction, or exportation of the merchandise. [T.D. 73-175, 38 FR 17482, July 2, 1973, as

Upon receipt of a petition for relief filed pursuant to the provisions of section 618 of the Tariff Act of 1930, as amended (19 U.S.C. 1618), or section 5321(c) of title 31, United States Code (31 U.S.C. 5321(c)), involving fines, penalties, and forfeitures which are outside

If the petitioner is not satisfied with a decision of the deciding official on an original petition for relief, a supplemental petition may be filed with the Fines, Penalties, and Forfeitures Officer having jurisdiction in the port where the violation occurred. Such supplemental petition must be filed within 60 days from the date of notice to the petitioner of the decision from which further relief is requested or within 60 days following an administrative or judicial decision with respect

An investigation under this part may be commenced on the basis of a petition, request, resolution, or motion as provided for in the statutory provisions listed in §§206.1 and 206.31. Each petition or request, as the case maybe, filed by an entity representative of a domestic industry under this part shall state clearly on the first page thereof “This is a [petition or

The request for an investigation shall include the following information: (a) The identity of the entity submitting the request; a description of the relief action the effectiveness of which is allegedly being undermined; and a description of the imported article, identifying the United States tariff provision under which it is classified, and the name of the country or countries from which the surge in imports is alleged to be

procedure used shall meet scientifically accepted procedures. An example of a scientifically accepted procedure is outlined in the Manual on Sensory Testing Methods, ASTM Special Technical Publication 434, published by the American Society for Testing and Materials, 1916 Race Street, Philadelphia, Pennsylvania 19103, ASTM, 1968, Library of Congress Catalog Card Number 68-15545. (3) A statement shall appear in the advertisement