(a) General. As used in this section, “loading/unloading outlet” means any opening in the cargo tank wall used for loading or unloading of lading, as distinguished from outlets such as manhole covers, vents, vapor recovery devices, and similar closures. Cargo tank outlets, closures and associated piping must be protected in accordance with

(l) A loose wheel or tire. (m) Fusion welding may not be used on tires or steel wheels of locomotives, except for the repair of flat spots and worn flanges on locomotives used exclusively in yard service. A wheel that has been welded is a welded wheel for the life of the wheel.

(a) Prior to departure from an initial terminal, each locomotive, except for MU locomotives, shall be equipped with operative sanders that deposit sand on each rail in front of the first power operated wheel set in the direction of movement or shall be handled in accordance with the requirements contained in §229.9. (b) A locomotive being

of its initial position when the force is removed. (c) Lumbar spine, abdomen, and pelvis test procedure. The test procedure for the lumbar spine, abdomen, and pelvis is as follows: (1) Remove the dummy's head-neck assembly, arms, and lower legs, clean and dry all component surfaces, and seat the dummy upright on a seat as specified in Figure 42. (2) Adjust the

approve such CBP regulations concerning subject matters listed in paragraph 1(a)(i) of the order. Regulations for which the Secretary of the Treasury retains the sole authority to approve will be signed by the Secretary of Homeland Security (or his or her DHS delegate), and by the Secretary of the Treasury (or his or her Treasury delegate) to indicate approval. (2) When a regulation described in paragraph (a)(1) of this section is published in the

48 U.S.C. 1405q, and shall be detained. (b) Articles made in whole or in part of gold or silver or alloys thereof imported for sale by manufacturers or dealers which are marked or labeled in a manner indicating a greater degree of fineness than the actual fineness of the gold or silver or alloys thereof, and any plated or filled articles so imported which are marked or labeled to indicate the fineness of the gold or silver and are not also marked or labeled

For the purpose of this subpart: (a) (1) Except as hereinafter provided, the term meeting means the deliberations of at least the number of individual Commissioners required to take action on behalf of the Commission where such deliberations determine or result in the joint conduct or disposition of official Commission business.

Open Table Initial determination concerning: Petitions for review due: Response to petitions due: Commission

(a) Introduction. “Termination” is a term of art that refers to the end of an antidumping or countervailing duty proceeding in which an order has not yet been issued. The Act establishes a variety of mechanisms by which an investigation may be terminated, most of which are dealt with in this section. For rules regarding the termination of a suspended investigation following a review under section 751 of the Act,

process. A user may not transfer the spirits to other portable containers for storage except in the following circumstances: (1) Contents of damaged packages may be transferred to new packages to prevent loss or waste; or (2) Contents of portable containers may be transferred to “safety” containers to comply with city or State fire code regulations, or on filing notice with the appropriate TTB officer to comply with the safety

, shall prepare Regulatory Impact Analyses and transmit them, along with all notices of proposed rulemaking and all final rules, to the Director, Office of Management and Budget, as follows: (1) If no notice of proposed rulemaking is to be published for a proposed major rule that is not an emergency rule, the agency shall prepare only a final Regulatory Impact Analysis, which shall be transmitted, along with the proposed rule, to the Director, Office of Management and

(a) The proposed location of a new refuse pile shall be reported to and acknowledged in writing by the District Manager prior to the beginning of any work associated with the construction of the refuse pile. (b) Before May 1, 1976, for existing refuse piles, or within 180 days from the date of acknowledgment of the proposed location of a new refuse pile, the person owning, operating or controlling a refuse pile shall submit to the

(4) Platforms having configurations and designs which have not previously been used or proven for use in the area; or (5) Platforms installed in seismically active areas. (b) All new floating platforms are subject to the Platform Verification Program to the extent indicated in the following table: Open Table

(a) You must be certified under section 411(a) of SMCRA to receive certified in lieu funds. (b) If you meet the eligibility requirement in paragraph (a) of this section, we distribute these certified in lieu funds to you as follows: (1) Starting in the Federal fiscal year that begins on October 1, 2008, we annually distribute funds to you based on 50 percent of reclamation fees received for coal

complete application, whichever is later. For purposes of this paragraph, a person includes, but is not limited to an official of any Federal, State, or local government agency. (f) Within 30 days from the last publication of the newspaper notice, written comments or objections to an application for significant revision or renewal of a permit may be submitted to the regulatory authority by: (1) Any person having an interest that is or

May 5, 1994 July 29, 1994 Chapter 5—Coordination with Ramp, Indian, and Other Reclamation Programs. (d) The Kentucky Abandoned Mine Land Reclamation Plan amendment, submitted to OSM on April 29, 2002, is approved with the following exceptions. The word “or,” which appears at the end of paragraph 1 of the section entitled “Lands for Permanent

responsibility for all, or a portion, of the removal activity at a site. Political subdivisions must comply with the requirements described in §35.6105(a). To the extent practicable, political subdivisions also must comply with the notification requirement at §35.6120 when a removal action is necessary and

program; (iii) Inspection regulations and procedures; (iv) Technical details of the test procedures and the rationale for their design; (v) Emission control device function, configuration, and inspection; (vi) Test equipment operation, calibration, and maintenance (with the exception of test procedures which either do not require the use of special

incorporated into this section: (1) New Source means new OCS source; and (2) Existing Source means existing OCS source; and (3) Modification means a modification to an OCS source. (4) For requirements adopted prior to promulgation of this part, language in

(a) Except as specified in paragraph (e) of this section, the affected facility to which this subpart applies is each electric utility steam generating unit: (1) That is capable of combusting more than 73 megawatts (MW) (250 million British thermal units per hour (MMBtu/hr)) heat input of fossil fuel (either alone or in combination with any other fuel); and (2) For which construction, modification

(a) The owner or operator shall comply with all applicable State implementation plan emission limits and (subject to any expiration date) all federally enforceable emission limitations which are contained in an order, decree, permit, or settlement agreement for the control of emissions from offtake systems, topside port lids, coke oven doors, and charging operations in effect on September 15, 1992, or which have been modified according to the provisions of paragraph

the chemical name of each corrosion inhibitor ingredient used; the average concentration of those corrosion inhibitor ingredients maintained in the cooling water; and the material safety data sheet for each water treatment chemical or chemical compound used in the IPCT. (2) In accordance with §63.9(b) of subpart A, owners or operators of all affected IPCT's that have

Open Table For the operating parameter applicable to you, as specified in Table 3 .  .  . You must establish the following operating limit .  .  .

regulated-material. For the purpose of this subpart, an individual drain system is not a drain and collection system that is designed and operated for the sole purpose of collecting rainfall runoff (e.g., stormwater sewer system) and is segregated from all other individual drain systems. Junction box means a sump, manhole, or access point to a sewer line or a lift station.

), as defined in §63.90, and as required in this subpart. (3) Approval of any alternative measurement methods for HCl and CL2 to those specified in §63.1161(d)(1). (4) Approval of

ion to sulfur (e.g., the LO-CAT II process). (3) A redundant sulfur recovery unit not located at a petroleum refinery and used by the refinery only for emergency or maintenance backup. (4) Equipment associated with bypass lines such as low leg drains, high point bleed, analyzer vents, open-ended valves or lines, or pressure relief valves needed for safety reasons. (5) Gaseous streams routed to

If you own or operate a stationary RICE with a site rating of more than 500 brake HP located at a major source of HAP emissions you are subject to the requirements of this section. (a) You must conduct the initial performance test or other initial compliance demonstrations in Table 4 to this subpart that apply to you within 180 days after the compliance date that is specified for your stationary RICE in