(a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified as manganese (2+), bisoctahydro-1,4,7-trimethyl-1H-1,4,7-triazonine-.kappa.N1,.kappa.N4,.kappa.N7) tri-.mu.-oxidi-, hexafluorophosphate(1-) (1:2) (1:1) (PMN P-17-226, CAS No. 116633-52-4) is subject to reporting under this section for the significant new uses described in paragraph (a)(2

(a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as benzenesulfonic acid 1,2-diazenediylbis[6-ethenyl]-3-sulfophenyl diazenyl-2-sulfophenyl ethenyl salt (PMN P-16-487) is subject to reporting under this section for the significant new uses described in paragraph (a)(2) of this section. (2

(a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as ethanaminium, alkyl-, salt with triazole (PMN P-16-533) is subject to reporting under this section for the significant new uses described in paragraph (a)(2) of this section. (2) The significant new uses are:

(a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as monoheteropentacycloalkane-4-carboxylic acid, substituted cyclo-alkyl ester (PMN P-17-177) is subject to reporting under this section for the significant new uses described in paragraph (a)(2) of this section. The requirements of this section do not apply to quantities of

(a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as branched alkyl (C=17) carboxylic acid (PMN P-17-247) is subject to reporting under this section for the significant new uses described in paragraph (a)(2) of this section. The requirements of this section do not apply to quantities of the substance after they have been

(a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as branched alkyl (C=18) alcohol (PMN P-17-248) is subject to reporting under this section for the significant new uses described in paragraph (a)(2) of this section. The requirements of this section do not apply to quantities of the substance after they have been reacted

(a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as polymeric sulfide (PMN P-15-734) is subject to reporting under this section for the significant new uses described in paragraph (a)(2) of this section. (2) The significant new uses are: (i)

″-(ethenylsilylidyne)trioxime] (PMN P-17-308, CAS No. 58190-62-8) is subject to reporting under this section for the significant new uses described in paragraph (a)(2) of this section. The requirements of this section do not apply to quantities of the substance after they have been completely reacted (cured). (2) The significant new uses are: (i) Protection in the workplace

″-(methylsilylidyne)trioxime] (PMN P-17-309, CAS No. 37859-55-5) is subject to reporting under this section for the significant new uses described in paragraph (a)(2) of this section. The requirements of this section do not apply to quantities of the substance after they have been completely reacted (cured). (2) The significant new uses are: (i) Protection in the workplace

(a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as heteromonocycle, 2-[(bicarbomonocycle-2-substituted)alkyl]- (PMN P-17-353) is subject to reporting under this section for the significant new uses described in paragraph (a)(2) of this section. The requirements of this section do not apply to quantities of the substance

(a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as amine- and hydroxy-functional acrylic polymer, neutralized (PMN P-17-249) is subject to reporting under this section for the significant new uses described in paragraph (a)(2) of this section. The requirements of this section do not apply to quantities of the substance

(a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as aspartic acid, tallow modified diester (PMN P-18-82) is subject to reporting under this section for the significant new uses described in paragraph (a)(2) of this section. (2) The significant new uses are:

constitute excessive punishment under the circumstances; (vii) Determination of other mitigating circumstances appropriate to consideration in reaching a fair and expeditious assessment. (2) When the penalty is for a violation on Indian lands, the Federal land manager shall consult with and consider the interests of the Indian landowner and the Indian tribe having jurisdiction over the Indian lands prior to proposing to mitigate or

(a) Steel plate material used to fabricate tanks must conform with the following specifications with the indicated minimum tensile strength and elongation in the welded condition. However, the maximum allowable carbon content for carbon steel must not exceed 0.31 percent, although the individual ASTM specification may allow for a greater amount of carbon. The plates may be clad with other approved materials:

; (4) The argument, presenting clearly the points of fact and law relied upon in support of the position on each question, with specific page references to the record and the legal or other material relied upon; and (5) A proposed form of order for the Administrator's consideration in lieu of the order contained in the Initial Decision. (c) Answering brief.

Associate Administrator an up-to-date, accurate, and complete Grade Crossing Inventory Form for each public highway-rail grade crossing, private highway-rail grade crossing, and pedestrian crossing within the quiet zone. (b) Quiet zones which do not have a supplementary safety measure at each public crossing. This paragraph addresses quiet zones established pursuant to

(a) Each specification DOT 412 cargo tank motor vehicle must conform to the general design and construction requirements in §178.345 in addition to the specific requirements of this section. (b) The MAWP of each cargo tank must be at least 5 psig. (c) The MAWP for each cargo tank designed to be loaded by

amended, now revoked, are codified in this paragraph. This part is not applicable to the following equipment: (1) Scale test weight cars. (2) Locomotive cranes, steam shovels, pile drivers, and machines of similar construction, and maintenance machines built prior to September 21, 1945. (3) Export, industrial, and other cars not owned by a railroad which are not to be used in service, except for

65 percent but not more than 85 percent. (c) Test procedure. The test procedure for the thorax assembly is as follows: (1) Soak the dummy in a controlled environment at any temperature between 20.6° and 22.2 °C (69° and 72 °F) and a relative humidity between 10 and 70 percent for at least four hours prior to a test. (2) Seat and orient the dummy, wearing

(a) Requirement. NIFA is responsible for performing a review of applications submitted to NIFA competitive award programs in accordance with section 103(a) of AREERA (7 U.S.C. 7613(a)). Reviews are undertaken to ensure that projects supported by NIFA are of high quality and are consistent with the goals and requirements of the funding

above actions only after the surety has been provided reasonable notice with an opportunity to pay delinquent amounts, provide justification for the failure to pay, or demonstrate the existence of a significant legal issue justifying further delay in payment. (4) Review and final decision. After a review of any submission made by a surety under paragraph (c)(3) of this section, if an appropriate CBP officer is still of the

All submissions of factual information to CBP must comply with the requirements specified in §§165.4 and 165.5 and this section. The submissions will be placed on the administrative record. (a) Request for information by CBP. In making a determination under

party “has failed to cooperate by not acting to the best of its ability to comply with a request for information,” the Secretary may use an inference that is adverse to the interests of that party in selecting from among the facts otherwise available. This section lists some of the sources of information upon which the Secretary may base an adverse inference and explains the actions the Secretary will take with respect to corroboration of information. (b)

(a) Name. The name of the viticultural area described in this section is “Clarksburg.” (b) Approved maps. The appropriate maps for determining the boundaries of the Clarksburg viticultural area are eight U.S.G.S. topographic maps in the 7.5 minute series, as follows: (1) Sacramento West, Calif., 1967 (photorevised 1980).

(a) Name. The name of the viticultural area described in this section is “South Coast.” (b) Approved maps. The appropriate maps for determining the boundaries of South Coast viticultural area are four U.S.G.S. maps. They are titled: (1) San Diego, 1:250,000 series, 1958 (revised 1978). (2

(a) Name. The name of the viticultural area described in this section is “Texas Hill Country.” (b) Approved maps. The appropriate maps for determining the boundaries of the “Texas Hill Country” viticultural area are 7 U.S.G.S. (scale 1:250,000) maps. They are titled: (1) Brownwood, Texas, 1954 (revised 1974);

(a) Name. The name of the viticultural area described in this section is “Alexandria Lakes”. (b) Approved maps. The appropriate maps for determining the boundary of the Alexandria Lakes viticultural area are four United States Geological Survey 1:24,000 scale topographic maps. They are titled: (1) Alexandria West, Minn., 1966

(a) Name. The name of the viticultural area described in this section is “High Valley”. For purposes of part 4 of this chapter, “High Valley” is a term of viticultural significance. (b) Approved Maps. The appropriate maps for determining the boundaries of the “High Valley” viticultural area are three United States Geological Survey (USGS) 1:24,000 scale